for Renault Alle

Fixing clip for door lining. Very good reproduction. Suitable for Citroen 2CV, DS, Peugeot

Renault. Per piece. For 2CV, you need 5 clips for 1 door lining in front (low version) and 4 for rear. For 7mm holes!

• Suitable for this article
• 
  Plastic plug, white, in the door for doorlining. Citroen DS, per item. Inside
  0,60 €

Door lining clip, suitable for Renault R4, R16, Estafette, Floride, Dauphine etc. Renault R4 has 12

2 in the front and 8 in the rear (40 in total).

Door lining clips 30 fittings. Suitable for various Citroen, Peugeot, Talbot. From the eighties +

90's.

Twingo, side member on the right. Suitable for Renault Twingo 1. Original Renault! Or. No

7751473084

Conversion kit automatic choke (automatic cold weather start) on manual Choke. Suitable for Renault

4CV, Dauphine, R8, Floride, early Estafette. Simca Aronde. Total cable length: 2200mm.

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal radiator hose 90° sheet. Inside diameter: 15,0 > 16,0mm. Outside diameter: 25mm. Leg

length 130 + 100mm.

• Suitable for this article
• 
  Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band
  4,21 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Console for a radio in DIN measurements. The console is mounted under the dashboard. Uinversal

fitting, e.g. Citroen 2CV, DS. Dimension cutout for radio: 182 x 53mm. Dimension outside: Height: 76mm. Wide above 250mm (down 220mm). Deep one: 175mm.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Vacuum switch - unit for Ducellier ignition distributor. Suitable for Renault R4, R5, R6, R8, R10

R12, R16, R15, R17, R18, R20, Fuego. Reproduction. Or. No. 7701020034, 7701021560, 7701021570

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cover gasket, suitable for Renault R4, R5. For engines with 747 + 782 + 845cc. Dimension

About 345 x 93mm.

• Suitable for this article
• 
  Fiber washer seal for the connector of the valve cap. Suitable for Renault R4
  0,40 €

Valve cover gasket. For engines with 852cc, 955cc, 956cc, 1108cc. Suitable for Renault R4, R5, R6

R8, R10, R12, Estafette. Material: rubber. Attention: Please take the seal out of the bag and unfold it (it seems as if the bag contains the wrong seal!)

• Suitable for this article
• 
  Fiber washer seal for the connector of the valve cap. Suitable for Renault R4
  0,40 €

Valve cover gasket. Suitable for Renault R15, R17, R18, R20. 1647cc engine. Or. No. 0428855000

Valve cover gasket. Suitable for Renault R16 + R12 (1.6L), Fuego, ca. 42,5 x 14 cm, Or. No

7700725186 + 0428595400

Valve cover gasket. Suitable for Renault R5 (1289cc + 1397cc). Renault 6 (1108cc). R5 Super (1237cc

1397cc). Estafette (1289cc).

Valve cover gasket. Suitable for Renault R5 1.4 + 1.4 Turbo. Renault R5 Alpine 1.4 Turbo.

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

universal valve spring cpmpressor, for the development of the valves + valve springs.

Valve spring set (8 item). Suitable for Renault 4CV, Dauphine, R4 small engine (to 845ccm)

Diameter: 22mm. Length: 38mm

Valve guide outlet valve, suitable for Renault R16 (1470cc), starting from year of construction

1966. R16L + tl (1565cc), starting from year of construction 1978. Length: 49mm. Inside diameter: 8,00mm. Outside diameter: 13,14mm.

Valve guide exhaust valve. Suitable for Peugeot 504 V6 (Coupe + Cabrio). Renault Alpine V6. Renault

R30. Length: 51mm

Valve guide exhaust valve. Suitable for Renault with rear engine (R8, R10, Alpine, Floride). Inside

diameter: 8,00mm. Outside diameter: 13,13mm. Length: 49mm.

Valve guide exhaust valve. Suitable for Renault with rear engine. (R8, R10, Alpine, Floride)

Inside diameter: 8,00mm. Outside diameter: 13,13mm. Length: 40mm.

Valve guide inlet + exhaust. Suitable for Renault with rear engine (Dauphine). Inside diameter

6,00mm. Outside diameter: 10,10mm. Length: 35mm

Valve guide inlet + exhaust. Suitable for Renault with rear engine (Dauphine, Floride). Renault R4

Inside diameter: 7,00mm. Outside diameter: 11,12mm. Length: 35mm.

Valve guide inlet + exhaust. Suitable for Renault R4, R5, R6, R8, R10. Inside diameter: 7,0mm

Outside diameter: 11,15mm. Length: 41,4mm.

Valve guide inlet valve, suitable for Renault R16 (1470cc), starting from year of construction

1966. R16L + tl (1565cc), starting from year of construction 1978. Length: 39,5mm. Inside diameter: 8,02mm. Outside diameter: 13,14mm.

Valve guide inlet valve. Suitable for Peugeot 504 V6 (Coupe + Cabrio). Renault Alpine V6. Renault

R30. Length: 51mm

Valve guide for inlet + exhaust. Suitable for Renault R4, Dauphine, Floride. Engine: 782 + 845cc

Length: 34,0mm. Inside diameter: 7,0mm.

Valve guide Renault 4CV. Inside diameter: 5,5mm. Outside diameter: 9,10mm. Length: 40,5mm

Material: Bronze

Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.

Valve stem seal (rubber ring). Suitable for Renault 4CV, Foride, Estafette 1 version, Juva, R4

(first version). Or. No. 6039905. Per piece

Valve stem seal (per piece). Suitable for Peugeot 504 V6. Renault R30 V6, Alpine V6. Inner

diameter: 7,5 - 8,00 mm. Inner diameter at bottom: 10.5 mm.

Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956ccm

1108ccm. Suitable for Renault R4, R5, R8, Estafette. Outside diameter: 13,2mm. Amount: 10mm. Inside diameter: 7,0/10,0mm.

Valve stem seal, suitable for inlet and exhaust (per piece). For engine: 747ccm, 782ccm, 845ccm

Suitable for Renault R4, R5, Dauphine. Outside diameter: 14,2mm. Amount: 10mm. Inside diameter: 8,0mm.

Valve stem seals. Suitable for Peugeot 204, 304, 305, 404, 504, J5, J7. Citroen CX, Renault Super

5, R9, R11, R12, R16, R17, R20, Talbot Horizon, Samba, Simca 1000 + 1100. Petrol (8 pieces). Inlet + exhaust identically constructed. Valve stem: 8,0mm. Guide soupape adm. et éch diameter: 11mm. High: 10mm.

First aid kit Compact, according to DIN 13164. Length: 215mm. Wide one: 55mm. Amount: 130mm

Original LEINA!

Carburetor sealing set for Citroen Ami 6, Dyane. Renault Dauphine, R4, R6. Carburetor Solex 34PICS

3.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404

504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €