Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
for Citroën 2CV 2CValt
1703 Articles | Page 12 of 35
Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV
and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
Brake liner centering tool in front, for the drum brake. Suitable for Citroen 2CV, to year of
construction 1981. AMI, Dyane, Mehari.
Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bore
10mm. Tool mounting: 24mm. These cams can be used also for Citroen DS, the bore must be changed to 12mm!
Centering cam for the brake shoe in front. Suitable for Citroen 2CV, to year of construction 1981
Diameter cam: 16mm. Bore: 10mm. Tool mounting: 21mm. Per piece.
Brake centring tool, for the rear brake drum. Suitable for Citroen 2CV, Dyane + Mehari (not
suitable for AK, Acadiane, Ami6, Ami8).
Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction
1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV to year
of construction 1963. Peugeot 202, 203, 403, 404. Renault rear engine, R4. Diameter: 57mm. Reservoir height with locking cap: 97mm. Threaded connection on the master brake cylinder: 3/4 16h. Made in Spain.
Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV with
front drum brake. Diameter: 57mm. Reservoir height with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5. Made in Spain.
Brake fluid reservoir with locking cap, for the brake system LHM. Suitable for Citroen 2CV, Dyane
AMI8 with front disk brake system and single circuit brake system. Diameter: 56mm. Reservoir height with locking cap: 100mm. Threaded connection on the master brake cylinder: M16 x 1,5. Made in Spain.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 6.0mm. This system of the securement was used by many france classic car`s. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 8.0mm. This system of the securement was used with many französichen car. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake line and petrol pipe clamp made of metal, to be screwed on. Suitable for Citroen 2CV6, 2CV4
Dyane4+6, AK, ACDY, Mehari, AMI. This metal clamp is simply mounted with a screw. It can be used to attach the brake line and the petrol line at the same time. Older 2CVs up to the 1970s also had the clamp mounted on the chassis from above (1x behind the headlight carrier for the petrol line) and 1x below the main brake cylinder on the chassis (for the brake line).
Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings
A brake pipe flaring machine is not necessary. Or. No. 1D5426236B
Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!
Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!
Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
Brake line - connector block (9 mm thread). Suitable for Citroën 2CV, with a year of construction
07/1964 to 02/1970, AMI 6 (12/1963-1968), Méhari (05/1969 > 12/1971) and Dyane up to the year of construction 1979. Connector for the brake line running rearwards, linking the brake hose to the cross-mounted brake line above the rear axle. Or. No. AM453-70A
Brake line link (3 path link). Thread brake line connector: M9. Installed at many Citroen 2CV from
the fifties + sixties. (in front)
Brake line connector on the brake hose, at the rear left + in front on the right. Suitable for
Citroen 2CV. Length: 47mm. Or. No. A45377
Brake line connector on the wheel brake cylinder. Suitable for Citroen 2CV, to year of construction
1963. Length: 20mm. Very good reproduction. Made by Franzose
Brake line, suitable for Citroen 2CV, AZU, AMi6, to year of construction 1970. Transverse
connection (crosswise) on the rear axle. Connector: M9. Brake hose diameter: 4,5mm. Overall length: 940mm.
Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Citroen Mehari to year of
construction 01/1972. Connection from the T-link to the front right wheel brake cylinder. Brake line diameter: 4,5mm. Connector: M9x1,25. Or. No. AY45331
Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Connection of the master
brake cylinder (front side) to the brake hose. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: about 345mm. Or. No. AY453353A
Brake line, suitable for Citroen 2CV, of year of construction 07/1964 to 02/1970. Connection at
that rear wheel-radius arm, from the brake hose to the wheel brake cylinder. On the left + on the right fitting! Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 630mm. Or. No. AY453-34B + AY453-34C.
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Crosswise connection
on the rear axle and mounting of the brake hoses. Or. No. A453-33
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection rear
from the brake hose to the wheel brake cylinder.
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection from the
master brake cylinder to the rear axle. Or.Nr.: A453-32
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection in front
on the left to the wheel brake cylinder.
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 1970. Connection to the wheel
brake cylinder in front on the right.
Brake line, suitable for Citroen 2CV, of year of construction 1964 to 1972. Connection of the
master brake cylinder on the T-link at the rear axle. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 1950mm. Or.Nr.: AY 453-32B
Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic
fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV (for the brake hoses), Installed to year of construction 1981 (2CV with drum brake in front). Citroen DS to year of construction 1967, for the hydraulic lines.
Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connector
M9). Suitable for Citroen 2CV + Citroen HY.
Brake line set. Brake system DOT. Suitable for Citroen 2CV, from year of construction 06/1952 to
year of construction 1964. This brake line set is preformed and supplied completley with all hollow bolts, connectors and fixtures.
Brake line set made of Kunifer. Brake system DOT. Suitable for Citroen 2CV, from year of
manufacture 1964 to 1970. This brake line set is completely pre-bent and comes with all banjo bolts, screw fittings and brackets.
Brake light switch old version. Suitable for Citroen 2CV (6 volt), AMI6 + Citroen ID19, up to year
of construction 08/1961 (DM576-02, does not fit Citroen DS). The brake light switch is mounted in the engine compartment on the firewall. Reproduction. Or. No. AZ57602 (2CV). However, with a little skill, the brake light switch can also be converted to fit the DS19 with Or. No. DS576-02A. The brake light switch for DS19 is no longer available.
1703 Articles | Page 12 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
