Rubber hose between carburetor + air filter, suitable for Citroen 2CV, AZAM, AMI6. Of round
carburetor on grey sheet metal air filter.
for Citroën 2CV 2CValt
1703 Articles | Page 17 of 35
Rubber socket for the wiper system nozzle, large version. Suitable for Citroen DS, starting from
year of construction 1967. Citroen 2CV, all models. Inside diameter: 6,0mm. Outside diameter: 16mm. For sheet metal bore: 11mm.
Hook suitable for seat rubber, for Citroen 2CV, of year of construction 1949 to 12/1954. 25x30 mm
The hooks are for the wide flat rubbers.
Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc
Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.
Retaining clip emblems for Citroen, Renault, Peugeot, old models. 2.5mm inner diameter (i.e. for
2.5mm pins on the emblems). Length: 7.5mm. Per piece
Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV
Dyane, AMI, AK, AZU, ACDY.
Fixture on the left, for the mounting of the engine suspension. Suitable for Citroen 2CV4. Or. No
AZ13386. Original Citroen. New old stock (NOS)
- Suitable for this article
Parking brake locking spring, for the tension rod. Suitable for Citroen 2CV, of year of
construction 09/1954 to 04/1967. Or.Nr.: A45484A
Parking brake pawl, for the tension rod. Suitable for Citroen 2CV, of year of construction 09/1954
to 04/1967. Or.Nr.: A454-17. The suitable spring has our number 13144.
Hand brake cable adjusting nut (butterfly nut). Suitable for Citroen 2CV with front drum brake
Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV, of year of construction 1966 to 1981
Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable mounting in front on the left. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder)
Suitable for Citroen 2CV.
Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for
Citroen 2CV starting from year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 20,63mm (13/16 inch).
Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for
Citroen 2CV to year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 22mm.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
AZU, AK, of year of construction 05/1967 to 1973. Hanging brake pedal! Piston diameter: 19,0mm. Brake line connector: 2x 9,0mm (M9). Or. No. AY453-03D + AY453-03E. Note: The master brake cylinders are converted from us on a better base valve (residual stress valve).
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, to
year of construction 1963. Piston diameter: 22mm. Brake line connector: 1x M12x1. Connection brake fluid reservoir: M16x1,5. Or. No. AM45303. Made in Spain.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
with being pedals. Piston diameter: 22mm. Brake line connector: 1x M12x1 + 1x M10x1mm. Connection brake fluid reservoir: M16. Very rare export version! This master brake cylinder was used also as clutch master cylinder at 2CV Sahara!
Master brake cylinder, brake system DOT. Single circuit brake system. Piston diameter: 19,0mm
Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 11/1970 to 7/1976. Hanging brake pedal! Made in Europe.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1963 to 1967. Piston diameter: 22mm. Brake line connector: 1x M9 + 1x M12. Connection brake fluid reservoir: M16x1,5. Made in Spain.
Main cable harness for Citroen 2CV, to year of construction 10/1954. Original-faithfully with
webbing encases. Made in Germany.
PDF FILE Main cable harness for Citroen 2CV, Installed from year of construction 10/1954 to 1962. 6 V
technology! Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 02/1970 to 07/1973. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 04/1966 to 02/1970. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 04/1967 to 02/1970. 6 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 06/1965 to 04/1967. 6 V
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 07/1973 to 09/1974. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 09/1962 to 06/1965. 6 V
technology. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 09/1974 to 07/1981. 12 Volt
technique. Made in Germany.
Tail - Shutter. Suitable for Citroen 2CV from the fifties, with small rear window. Quickly
installed (the brackets are only inserted into the upper and lower rear window rubber). A typical accessory from the fifties. Made in France
Rear rack from aluminum. Dimension: 870 x 370 x 100mm. Drilling measurement: 490 x 445mm. For the
securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel, with wooden strips. Dimension: 890 x 470mm. Drilling
measurement: 490 x 445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel. Dimension: 870 x 370 x 100mm. Drilling measurement: 490 x
445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel. Suitable for Citroen 2CV. Reproduction of the original
porter. Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes.
Rear rack, black primed. Suitable for Citroen 2CV. Reproduction of the original porter
Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes (Drilling dimensions - hole spacing: 490 x 350 mm).
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
Heating hose from felt, for Citroen 2CV from the fifties. Cheap, but optically not original
reproduction. Diameter: 70mm. Length: 420mm.
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
1703 Articles | Page 17 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
