for Citroën 2CV 2CValt
1703 Articles | Page 15 of 35
Fluid film AS-R 400ml spray can. Long-term corrosion protection + penetrating oil. The can is
delivery with a 15cm long spray pipe. Optimally for underbody coating, hollow spaces etc.. A suitable cavity probe is supplyable under the No. 21129. Viscosity: low like syrup.
Fluid metal, 25ml to fill up cracks, holes, cavities. For repairing tubes, tanks, screw threads
etc. Applicable on iron, cast ion parts, aluminium. Oil, petrol, water and alcohol immune. Can be polished, sawed and drilled after hardening!
Liquid metal 50ml. It is called liquid metal or cold metal. But the correct name is 2-component
epoxy resin. We wouldn't want to be without it in our car first-aid kit and it has helped us many times with minor breakdowns. The 2K material hardens very quickly. It can be sanded, drilled and threaded afterwards. Resistant to water, oil, fuel and many chemicals. Sandable and paintable. Very easy to use thanks to a mixing tube supplied. Other mixing tubes are also available (if you don't need the whole tube).
Guide suitable for the throttle linkage, for Citroen 2CV. 28mm wide. (Only for vehicles with
throttle linkage!) Made in Germany.
Guide suitable for the throttle linkage, for Citroen 2CV. 40mm wide. (Only for vehicles with
throttle linkage!) Made in Germany.
Guide bolt for the hand brake cable. Suitable for Citroen 2CV with front drum brake. The hand brake
cable is led by the pin. Or.Nr.: A 454 75
Seal in the pedal floor (front wall), for the gas linkage. Suitable for Citroen 2CV with foot
throttle, what is mounted on the pedal floor.
Throttle linkage clip, suitable for Citroen 2CV + HY. Only for vehicles with throttle linkage, not
for 2CV6 with throttle control cable! Or. No. AM124-121. Note: There is also the clip 10588. Those is curved 180° differently around.
Throttle linkage clip, suitable for Citroen 2CV + HY. Only for vehicles with throttle linkage, not
2CV6 with throttle control cable! Or.Nr. AZ124121. Note: There is also the clip 10690. Those is curved 180° differently around.
Collar for the seal, for the guide of the throttle linkage. Suitable for Citroen 2CV. (only for
vehicles with throttle linkage!)
Throttle linkage retreat spring. Suitable for all Citroen 2CV + Mehari with throttle linkage,
1963. Not suitable for 2CV with throttle control cable! Or.Nr.: AZ1425
Foot throttle - rubber base for straight, standing foot throttle. Suitable for Citroen 2CV. Also
foot heel pad. The base was in former times an option.
Foot throttle stop rubber, for Citroen 2CV. The rubber is mounted above in the foot throttle, for
vehicles with being foot throttle. (the foot throttle is mounted on the pedal floor plate)
Foot throttle being for Citroen 2CV, mounts on the pedal floor plate. The foot throttle is tapered
above. Installed in a 2CV starting from 03/1966.
Foot throttle being for Citroen 2CV, mounts on the pedal floor plate. Suitable for Citroen 2CV, to
year of construction 03/1966.
Foot throttle fixture down, for Citroen 2CV. For Citroen 2CV with being foot throttle. (Foot
throttle is mounted on the pedal floor). The fixture must be adapted! There is unfortunately no good foot throttle fixtures more supplyable!
Foot throttle mounting board (fixture) down. For Citroen 2CV with being foot throttle. (Foot
throttle is mounted on the pedal base.) Made in Europe.
Foot throttle - rubber base for tapered, standing foot throttle. Suitable for Citroen 2CV. Also
foot heel pad. The base was in former times an option.
Noise damming mats self adhesive. Color grey. Measurements: 1000 X.500 x 11mm. Stuffing contents
2x damming mat. Universal fitting.
PDF FILE Gearbox cap seal for Citroen 2CV/AMI6, Dyane. Suitable for the old gearbox, Installed off about
year of construction 1963.
Gearbox suspension on front axle: Locking plate for the screw connection on the gearbox. Suitable
for 2CV4 + 2CC Alt. Or. No. A133-87. Made in Germany.
Gearbox suspension locking plate (for the screws), suitable for Citroen 2CV. (Screw connection
through the gearbox suspension on the front axle). Reproduction from stainless steel. Or. No. A133-64 Made in Germany.
Gearbox suspension locking plate (for the screws), suitable for Citroen 2CV. (Screw connection
through the gearbox suspension on the front axle). Reproduction from metal. Or. No. A133-64 Made in Germany.
Gearbox/transmission oil SAE 75/80,( 1 liter, GL4 ) brand: TOTAL (alternatively from Petronas)
Suitable for Citroen 2CV, Dyane, AMI, Mehari. This gearbox oil "Transmission Gear8 75W80" made by TOTAL is a formally from Citroen and Peugeot approved oil. This oil is made exclusive and only for use in manual gearboxes, regarding to its high-viscosity it is qualified for very long operation time ( until 250000 km). Ideally suitable for all Classic Cars. Depending on the superior viscosity value of 80, shifting for gear chance is also in case of low temperatures no problem. We ourselves use this gearbox oil from TOTAL in our complete classic car pool, so as in : R4, DS, ID, 2CV, Peugeot 404 + 504, Dauphine, HY, Fiat 500, Alfa Spider. We are absolutely pleased with this high quality oil, properly for all classic cars.
Gearbox Oil addetive, 20g. Suitable for 1 liter transmission oil. This additive has been specially
developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and better fuel-efficiency.
Tap drill M10x1. (M10x1 was very often used with brake hoses). Manual cut tap drill!
- Suitable for this article
Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of
f pressure 55° with upward gradients 4-62 gear on 1 ".
Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread in Imperial, US and
metric sizes. Identifies: bolts and spark pluga from 10 to 18mm. Range 5/16 to 3/4, 10tpi - 44tpi, metric 2,5 - 22mm. Pitch 035 - 2,5mm.
Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are supplied
without nut`s. Suitable for 2CV (small suspension pot). Reproduction.
Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are supplied
without nut`s. Suitable for 2CV (small suspension pot). Original one and/or own production, the better choice. Or.Nr.: AZU434288A
Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV. Only suitable for
r small suspension pot. (46mm)
Glass and metal adhesive,special glass-metal glue, mirrors adhesive and glass-on-glass adhesive. We
searched for a long time and tried different products. This adhesive, which dries and hardens under UV light, is perfectly suited for fixing interior mirrors(rear-view mirrors) of a DS, window handles for sliding windows (Renault R4) or for the handles of triangular windows (VW T3, Alfa Romeo Spider, etc.). The adhesive is thick (gel-like) and should dry under the UV lamp (you also need 3x AAA batteries), also supplied with. As far as the adhesive has not been dried under the UV lamp, you can still make corrections (or wipe off excess adhesive). Of course, you can also use it to glue the handles of beer mugs or the bases of wine glasses! Technical details: Single-component adhesive that dries under UV light. Based on acrylate and polyurethane. The adhesive dries under UV light in the range of 320-400 nm within 15-20 seconds. The adhesive does not yellow. content of delivery: Acrybond adhesive 16 g. 1x UV lamp 1 W (batteries not included). Made in Germany. Believe us, if this adhesive had been available when we were young, we could have saved ourselves a lot of trouble..
1703 Articles | Page 15 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
