for Citroën Alle

Clutch cable, suitable for Citroen DS, of year of construction 09/1961 to 08/1962. Or. No. DM3142B

Clutch cable, suitable for Citroen DS, of year of construction 1965 to 1968. (3 lever finger

clutch). Length: 570mm. Casing covering: 425mm. Or. No. DM3142F

Clutch cable, suitable for Citroen DS, of year of construction 9/1962 to 8/1965. (3 lever finger

clutch). Length: 580mm. Or. No. DM3142D

Clutch cable, suitable for Citroen DS20. Length: 600mm. Sleeve lengthens: 400mm. Or. No. 5404245

Clutch cable, suitable for Citroen HY, starting from year of construction 1969. Overall length

400mm. Or. No. HY3142B

Clutch cable, suitable for Citroen HY, to year of construction 1969. Or. No. H3142A

Crank case (engine block) air vent hose above. Connection to the air intake hose between carburetor

air filter. Suitable for Citroen DS with carburetor engine. Inside diameter: 15 + 17mm. Or. No. 5413610M.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

Crank case (engine block) air vent hose down. Suitable for Citroen DS IE (injection engine)

Dimension: 19.5 x 314mm. Or.Nr.DX132279A.

• Suitable for this article
• 
  Brakes cleaner 500ml, spray bottle, removes even other filth,
  4,91 €
• 
  hose clamp for 15-20mm.
  0,93 €

Crank case (engine block) air vent hose down. Suitable for Citroen DS, to year of construction

07/1972 (carburetor engine). Diameter: Both sides 19-20mm. Length: 230mm (shorten if necessary). Or. No. DX13276C, DY13276A, DX132-76A

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

Seal under the crankcase ventilation on the engine block (flat ring rubber). Suitable for Citroen

DS. Or. 5412031, ca. 78x87x2,4mm. Made in Germany.

Crankshaft bearing (complete set), standard dimension. Suitable for Citroen 11CV with Perfo +

D-Engine, of year of construction 1937 to 1957. Citroen U23. Or. No. 45130A

Crankshaft bearing (complete set). 0.25 oversize. Suitable for Citroen 11CV with Perfo + D-Engine

of year of construction 1937 to 1957. Citroen U23 (van). Made one in France.

Crankshaft bearing (complete set). Suitable for Citroen DS 19, to year of construction 1965

Citroen HY petrol. Reproduction. Dimension: 0.25 undersize.

Crankshaft bearing (complete set). Suitable for Citroen DS 19, to year of construction 1965

Citroen HY petrol. Reproduction. Dimension: 0.50 undersize.

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Crankshaft bearing (complete set). Suitable for Citroen DS 19, to year of construction 1965

Citroen HY petrol. Reproduction. Dimension: 0.75 undersize.

Crankshaft bearing (complete set). Suitable for Citroen DS 19, to year of construction 1965

Citroen HY petrol. Reproduction. Dimension: 1,00 undersize.

Crankshaft bearing (complete set). Suitable for Citroen DS 19, to year of construction 1965

Citroen HY petrol. Reproduction. Dimension: Standard dimension. 54mm.

Crankshaft bearing (complete set). Suitable for Citroen DS, starting from year of construction 1965

(all engines). Reproduction. Dimension: 0.25 undersize (63,75mm).

• Suitable for this article
• 
  Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting
  22,71 €

Crankshaft bearing (complete set). Suitable for Citroen DS, starting from year of construction 1965

(all engines). Reproduction. Dimension: 0.50 undersize (63,5mm). Or. No. DX121-019B.

• Suitable for this article
• 
  Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting
  22,71 €

Crankshaft bearing (complete set). Suitable for Citroen DS, starting from year of construction 1965

(all engines). Reproduction. Dimension: Standard dimension. (64,00mm).

• Suitable for this article
• 
  Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting
  22,71 €

Crankshaft bearing 0.50 oversize. Suitable for Citroen 11CV D + 11CV Perfo, of year of construction

1936 to 1957. Citroen U23. Or. No. 45130C

Crankshaft bearing, standard dimension. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D

J7D. Engine: XD/P85 + XDP90 (1816cc + 2112cc).

Crankshaft bearing, oversize 0,30. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D, J7D

Engine: XD/P85 + XDP90 (1816cc + 2112cc). Dimension: 0,30 (for crankshafts with the measurement of 54.694 to 54,709mm).

Crankshaft bearing, oversize 0,50. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D, J7D

Engine: XD/P85 + XDP90 (1816cc + 2112cc). Dimension: 0,50 (for crankshafts with the measurement of 54.494 to 54,509mm).

Crankshaft nut (spur gears nut) 36x150. Suitable for Citroen 11CV. Wrench 46mm. Or. No. 461494

paint spray can 400ml colour black brilliant, best for chassis parts, since lasting flexibility

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

bearing for alternator DS >3/71 Lima Paris Rhone (A13R52)

Bearing rear, for the generator Paris Rhone, 12Volt. Suitable for Citroen HY. Dimension: 12.0 x

32.0 x 10,0mm. Or. No. ZC9620316U

Top bearing , for steering worm. Suitable for Citroen 11CV. Dimension: 50.5 x 16,8mm.

Bearing bush with rubber, for the steering column at the top. Suitable for Citroen 11CV + 15CV

Citroen HY, to year of construction 1965. Dimension: 36.7 x 22.5 x 30mm. Or. No. 604129 + 604130

Bearing bush, for starter motor Paris Rhone. Suitable for Citroen DS + HY. Dimension: 16 x 20 x

16mm. Or. No. DF53340

Bearing from synthetic (inside diameter 19,5mm. Outside diameter 26,0mm) for the gear change

intermediate spindle (connecting tube DJ334-102). Or. No. of the bearing: DJ334-140

Lamp plug that comes on the Bilux or H4 bulb. The plug also has a socket for a Sofitte at the same

time. If a vehicle needs to be retrofitted with parking lights, this plug can be used. Just drill a hole in the reflector, lay a new cable and you're done. Universal fitting!

• Suitable for this article
• 
  Sofitte 6 V, 5 Watts. 11x38mm, base SV8,5.
  1,58 €
• 
  Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik
  1,76 €

Longitudinal chassis beam in front on the left. Lower sheet metal with the arc upward (end point in

front on the left, down). Suitable for Citroen DS, starting from year of construction 1967 (new front).

Longitudinal chassis beam in front on the left. Lower sheet metal with the curve upwards (end point

front left, below). Fits Citroen DS, up to year of manufacture 1967 (old front).

Longitudinal chassis beam in front on the right. Lower sheet metal with the arc upward (end point

in front on the left, down). Suitable for Citroen DS, starting from year of construction 1967 (new front).

Longitudinal chassis beam in front on the right. Lower sheet metal with the curve upwards (end

point front left, below). Fits Citroen DS, up to year of manufacture 1967 (old front).

Liner sealing ring down. Suitable for Citroen 11CV, 15CV, ID19, HY. Standard measurement of 0,07mm

Inside diameter: 83,5mm. Outside diameter 95mm. Or. No.: D1113A

Liners sealing ring down (4 fittings). Suitable for Citroen DS 23. Bore 93,5mm. Dimension

108x99x0,2mm. Or.Nr. DS111-3

Liners sealing ring down, suitable for Citroen DS 19/20/21. starting from year of construction

9/1968. 107x98,5x0,2 mm measured. Bore 90,0mm. Per piece! Or. No. DX1113

Loudspeaker cover chrome, angularly, 120x160mm. Universal fitting. Per piece

Loudspeaker cover chrome, angularly, 160x200mm. Universal fitting. Per piece

Loudspeaker cover chrome, round, 130mm, universal fitting, per piece.

Idle stabilization completely, in the exchange. Idle stabilization does not have a vent screw

Suitable for Citroen DS IE (injection engine). Or. No. DXN142-020. Plus Old part deposit 150 Euro.

Idle stabilization completely, in the exchange. Idle stabilization does not have a vent screw

Suitable for Citroen DS carburetor. Or. No. Dx142-020. Plus Old part deposit 150 Euro.

Steering gear for Citroen DS, in the exchange. Suitable for hydraulic system LHM (power steering)

The steering unit is built up with newest seals and can be used for LHM liquid! Or. No. 9D5409726V. Plus 400 Euro Old part deposit. Note: The steering unit must be installed after the Citroen workshop specifications (workshop book 583, book 2, workingpaper D.444-1). You must have the tool 39002 (for the angle position of the steering gear to the steering column). Without this tool, you can not work!

• Suitable for this article
• 
  Sealing ring (O-ring), for the semi-automatic transmission and above at the
  0,75 €
• 
  Rubber seal centrically, for the steering gear. Suitable for Citroen DS
  3,92 €
• 
  Steering unit - adjusting tool, suitable for Citroen DS. (1955-T). This tool is
  62,38 €

Steering gear for Citroen DS, in the exchange. Suitable for hydraulic system LHS (power steering)

The steering unit is built up with newest seals and can be used for LHS liquid! Plus 400 Euro Old part deposit. Note: The steering unit must be installed after the Citroen workshop specifications (workshop book 583, book 2, workingpaper D.444-1). You must have the tool 39002 (for the angle position of the steering gear to the steering column). Without this tool, you can not work!

• Suitable for this article
• 
  Sealing ring (O-ring), for the semi-automatic transmission and above at the
  0,75 €
• 
  Rubber seal centrically, for the steering gear. Suitable for Citroen DS
  3,92 €
• 
  Steering unit - adjusting tool, suitable for Citroen DS. (1955-T). This tool is
  62,38 €

Steering gear repair set. Suitable for hydraulic systems LHM. Suitable for Citroen DS, starting

from year of construction 07/1967

• Suitable for this article
• 
  Steering gear for Citroen DS, in the exchange. Suitable for hydraulic system
  1.089,84 €

Steering gear: Pressure spring for the damping pushrod of the steering rack. Diameter: 16.5mm. Or

No. D442-2 + 5411166. Suitable for Citroen DS.

Steering gear bellow from rubber, suitable for Citroen 11CV + 15CV. Dimension: 58 x 132mm. Or. No

602135

• Suitable for this article
• 
  Collars clip strap with lock (made from metal). Overall length: about 500mm
  2,73 €