for Peugeot Alle

P 203, taillight bases made of metal (2 fittings). Suitable for Peugeot 203.

P 203, silencer tail pipe, suitable for Peugeot 203 BREAK. Installed from year of construction 1950

to 1959.

• Suitable for this article

P 203, silencer tail pipe, suitable for Peugeot 203 Pick UP. Installed from year of construction

1950 to 1959.

• Suitable for this article

P 203, silencer end pipe. Suitable for Peugeot 203 sedan (all years of construction). Curved

version.

P 203, silencer end pipe. Suitable for Peugeot 203 sedan (all years of construction). Straight

version.

P 203, silencer, suitable for Peugeot 203 BREAK + Pick UP. Installed from year of construction 1950

to 1959.

P 203, silencer. Suitable for Peugeot 203 sedan (all years of construction). Length (without

connecting tube): 61,0cm. Diameter silencer: 11,0cm. Inside diameter connection pipe: 35mm. Outside diameter connecting tube: 38,0mm.

P 203, gear switch lever case (made of metal) at the steering wheel. Suitable for Peugeot 203. Or

No. 6315.18

P 203, headlamp completely, version Marchal. For Peugeot 203. Very beautiful reproduction. The

headlamp have a test character. Consisting of: Headlamp, chrome ring, headlamp casing. Diameter at the chrome ring outside: about 220mm. Diameter chrome ring inside: about 175mm. Headlamp casing diameters: about 170mm. Depth: about 100mm.

• Suitable for this article
• 
  Double filament bulb 45/40W, 12V.
  2,93 €
• 
  Two-filament bulb 40/45 W, 12 Volt, yellow ! Not allowed in German traffic
  9,38 €

P 203, headlamp, version Cibie. For Peugeot 203.

P 203, headlight chrome ring for Ducellier headlamp. Suitable for Peugeot 203. Good quality

Outside diameter: 225mm. Inside diameter: 180mm. The chrome ring has 2 countersunk holes (1x above, 1x below) for fastening!

P 203, coverings (2x seat in front, 1x seat bench rear). Color: Material grey with bright vinyls

Suitable for Peugeot 203 sedan.

P 203, camshaft drive chain, 62 chain links (duplex, double chain). Suitable for Peugeot 203. Or

No. 0816.04

P 203, bumper in front + rear from high-grade steel. Suitable for Peugeot 203 sedan.

P203, speedometer cable Peugeot 203, 1500mm long.

P 203, fuel sender. Suitable for Peugeot 203 + 403. !! Attention: The fuel sender has 1x connection

for the fuel gauge.

• Suitable for this article
• 
  Fuel sender seal from rubber. Suitable for Citroen 2CV + Citroen DS, Renault
  2,96 €
• 
  Round pin plug, 4mm, feminine
  0,51 €

P 203, door handle outside (per piece). Suitable for Peugeot 203.

P 203, door linings set (4 fittings). Color: grey. Suitable for Peugeot 203.

P 203, valve cover gasket. Suitable for Peugeot 203. Material cork. Measurements about 465 x 190mm

Or. No. 0249.04

P 203, buckle rubbers for the water pump. Suitable for Peugeot 203. 1x inside diameter 7-9mm, 1x

inside diameter 18-22mm.

P 203, water pump seal for Peugeot 203. Or. N0. 1206.05

P 203, wiper arm chromium-plates, for Peugeot 203. Per piece.

P 203, ornamental clip for the radiator grill (per piece). Suitable for Peugeot 203.

P 203/202, engine suspension. Suitable for Peugeot 203 + 202 (on the left of or on the right

suitable). Securement hole center to hole center: 65mm. Or. No. 1807.06

• Suitable for this article
• 
  P 203/403, M10 nut (hexagonal pipe nut) on engine mount (screw connection of
  3,87 €

Wheel bearing Peugeot 204, 304, 305. External dimensions: 52mm, internal dimension: 25mm, height

16,25mm,

P 203/403 clutch pressure plate (new part). Suitable for Peugeot 203 + 403. For clutch disk

diameter: 200mm. Or. No. 2003.44

• Suitable for this article
• 
  P 203, clutch disk. Suitable for Peugeot 203. Diameter: 200mm. 10 teeth. For
  86,18 €
• 
  P 203/403/404, clutch release sleeve such as original (with graphite coil)
  59,41 €

P 203/403, indicator lever in grey. Suitable for Peugeot 203 + 403 to year of construction 1958

Or. No. 6315.18

P 203/403, turn signal switch housing (steering wheel hub lining) made of metal. Suitable for

Peugeot 203 + 403. Inside diameter: 33,5mm. Or. No. 6319.05

P 203/403, seal (2 item) for the wiper axle. Suitable for Peugeot 203, 403 + D3A/D4A/D4B. Or. No

6426.01

P 203, seal for the headlamp casing in the fender. Suitable for Peugeot 203 + 403. Made in Germany.

P 203/403, seal under the radiator cap. Suitable for Peugeot 203 + 403, 40x60mm. Or. No. 1306.06

Made in Germany.

P 203, window channel seals (inside and outside), for all 4 doors. Suitable for Peugeot 203 sedan

The seals fit also at Peugeot 403, but they must be cut.

P 203/403, guide rubber in the steering column (the rubber is without bronze bush). Suitable for

Peugeot 203 + 403. Or. No. 4126.03

P 203/403, DC alternator (10mm belt width). Suitable for Peugeot 203 + 403, Vespa 400. New part

50A, 12 Volt. But, it is actually a modern AC alternator with integrated alternator regulator, in the classic DC housing. The advantages are: Much more stable power output even at low speeds, much lighter (approx.4.5kg), very durable. The alternator regulator must be bypassed for connection (wiring diagram enclosed).

P 203/403, DC alternator (17mm belt width). Suitable for Peugeot 203 + 403, Vespa 400. New part

50A, 12 Volt. But, it is actually a modern AC alternator with integrated alternator regulator, in the classic DC housing. The advantages are: Much more stable power output even at low speeds, much lighter (approx.4.5kg), very durable. The alternator regulator must be bypassed for connection (wiring diagram enclosed).

P 203/403, slide shoe for starter motor yoke (original Peugeot), per piece. Suitable for Peugeot

203 + 403. Or. No. 5858.01

P 203/403, rubber stop front axle (per piece). Height: 60mm. Suitable for Peugeot 203 + Peugeot

403. Or. No. 3514.03

P 203/403, rubber stop front axle (per piece). Suitable for Peugeot 203 + Peugeot 403. Overall

height: 65mm. Or. No. 3514.02

P 203/403, rubber guide for the 5 ignition cables + 1x fuel hose. Suitable for Peugeot 203, Peugeot

403, Peugeot D3A/D4A/D4B. Or. No. 5979.02

P 203/403, piston + liner (4 pieces). Suitable for Peugeot 203 + 403 (7CV). Bore: 75mm. Piston pin

22 x 64mm. Piston rings: 2,5 + 2.5 + 4 + 4mm. (4 piston rings). Engine capacity: 1290cc. Or. No. 0111.06

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 203/403, piston ring set (for 4 pistons). Suitable for Peugeot 203 + 403. Bore: 75,0mm. Piston

rings: 2,0mm + 2,0mm + 4,5mm + 4,5mm. ^

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 203/403, piston ring set (for 4 pistons). Suitable for Peugeot 203 + 403. Bore: 75,0mm. Piston

rings: 2,0mm + 2,0mm + 4,5mm

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 203/403, piston ring set (for 4 pistons). Suitable for Peugeot 203 + 403. Bore: 75,0mm. Piston

rings: 2,5mm + 2,5mm + 4,0mm + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 203/403, radiator hose above, 2nd version. Suitable for Peugeot 403. Or. No. 1343.08

• Suitable for this article
• 
  Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band
  5,81 €

P 203/403, radiator hose lower. Suitable for Peugeot 203 + 403 (2 version). Or. No. 1350.13

• Suitable for this article
• 
  Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band
  4,76 €

P 203/403, radiator hose below. Suitable for Peugeot 203A, from year of construction 06/1955 to end

of production. 403 (7 + 8 CV) all years of construction. Or. No. 1350.12

• Suitable for this article
• 
  Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band
  4,76 €

P 203/403, crankshaft bearing, standard dimension. Suitable for Peugeot 203 + 403. Diameter

45/51/50 mm. Wide one: 36/40/45,8mm. Reproduction from the European Union. Basic information on crankshaft bearings: The crankshaft must be ground to the dimensions of the crankshaft bearings. Not the other way round!

P 203/403, crankshaft bearing, 0.30 oversize. Suitable for Peugeot 203 + 403. Diameter

44,7/50,7/49,70mm. Wide one: 36/40/45,8mm. Reproduction from the European Union. Basic information on crankshaft bearings: The crankshaft must be ground to the dimensions of the crankshaft bearings. Not the other way round!

P 203/403, crankshaft bearing. Suitable for Peugeot 203 + 403. 2 oversize (050). Diameter

44,5/50,5/49,50mm, wide one 36/40/45,8mm. Reproduction from the European Union. Basic information on crankshaft bearings: The crankshaft must be ground to the dimensions of the crankshaft bearings. Not the other way round!

P 203/403, crankshaft bearing. Suitable for Peugeot 203 + 403. 3 oversize (080). Diameter

44,2/50,2/49,20mm, wide one 36,0/40,0/45,80mm. Reproduction from the European Union. Basic information on crankshaft bearings: The crankshaft must be ground to the dimensions of the crankshaft bearings. Not the other way round!