for Peugeot Alle

mirror right Citroen Visa till 1980 Citroen LNA, R5, Peugeoz 104, Talbot Samba Made in France

Mirror approximately. The mirror is wedged at the door or the roof. Diameter: 100mm. Strongly

curved fixture. Completely made of metal.

Mirror round. Diameter: 120mm. Hole spacing for the screwed joint: about 104mm.

Mirror round. Diameter: about 105mm. Completely made of metal. Very beautiful small mirror

Mounting holes center - center: 47mm.

Mirror SPORT. Mounting on the fender. Diameter: 100mm. Completely made of metal. Typical, sporty

mirror from and the fifties and sixties.

Mirror Talbot. Completely made of anodized metal. Typical Talbot mirror, for mounting on the

fender. Diameter: about 95mm.

Mirror for clamping to the door. Made entirely of metal. Typical door mirror, as often used in the

1940s and 1950s (Citroen 11CV, Peugeot, Renault). Diameter: approx. 95 mm. Suitable for left and right!

Mirrors to attach at the door. Completely made of metal. Typical door mirror, how it installed very

often in the forties and fifties. Diameter: about 100mm.

Mirror head Peugeot J7, without mirrorarm. Measure: 150x245mm. Made in France

Cotter Pin Assortment, 555 pcs

Inclination rivet 3mm.

Circlips (shaft retaining rings) range 3-32mm. Outside! 300 pieces!

Circlips (shaft retaining rings) range 3-32mm, inside. 300 pieces!

Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High

adhesive. We have been searching for a long time since we found a really good one.

spray paint rim silver 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 650°C 400ml, colour silver

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C 400ml, colour anthracite

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C, 400ml, colour black

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black brilliant 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black matt 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV. Renault R4, R5. Peugeot

404 etc. clamping range 16-18mm. Opening 19mm!

Tie rod end splitter (max. 23 mm fitment), workshop quality.

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal

suitable for Citroen, Peugeot, Renault.

Dust cap brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also suitable

for other vehicles with 1,25 inch piston. (30,75mm)

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 3/4 inch (19,05mm). Suitable for Citroen HY

Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY

11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

stone guard MOTIP, colour grey for spray gun, 1000ml

Actuator for door locking (operation of the pull rod in the lock). Suitable for Peugeot 205, 106

206, 306, 309, 405, 406, 806, Expert 1 + 2. Citroen: AX, BX, C15, Evasion, Jumpy 1 + 2, Xantia 1 + 2, XM 1 + 2. Or. No. 6615.02

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 link

(simplex). Length: 94 links. Per piece! For one car, you need 2 pieces!

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chain, 90 chain links (duplex, double chain). Suitable for Peugeot 204 (1,1L), of

year of construction 1965 to 1969. Peugeot 504 (1,8L petrol + 2.3 Diesel). Peugeot 505 (2,3D + 2,5D + TD), 604 (2,3TD + 2,5TD). J7 + J9 (2,3D + 2,5D). Brand manufacturer. Or. No. 0816.21

Camshaft drive chain, 92 chain links (simplex). Suitable for Peugeot 304 (1290cc, 65HP), of year of

construction 1972 to 10/1079. Peugeot 305 (1472cc), of year of construction 05/1980 to 08/1985. Or. No. 0816.14

Timing chain, suitable for Peugeot 204 (XK4 engine) and Peugeot 304S (XL3 + XL3S engine, 1290cc

65hp + 75hp). Simplex, 90 chain links. Branded product. Item no. 0816.11.

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For

simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Camshaft drive chain guide at the camshaft drive chain tensioner. Suitable for Peugeot 504 V6, 604

V6. Renault R30, Alpine V6. Per piece! You need 2 pieces.