for Peugeot Alle

Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring

plates that are mounted on the side of the brake shoes (e.g. our item number 13054).

Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, starting from year of

construction 07/1986. Renault R5. Peugeot 104. Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction

Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, R5. Citroen Visa. Peugeot

104. Drum diameter: 180mm. Lining-wide: 32mm. Made in Europe.

Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104

Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Original equipment quality.

Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104

Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction. Made in Europe.

Brake shoes rear. Brake system: Lucas Girling. Suitable for Renault R16, R20, R30. Peugeot 204 +

304. Drum diameter: 228mm. Lining-wide: 42mm. Original equipment quality.

Brake shoes mounting set (rear). Brake system: Bendix. Suitable for Renault R4. Peugeot 104

Citroen LNA, Visa. For drum diameters: 180mm. Lining-wide: 30mm + 40mm.

Brake shoes Peugeot 203 for front + rear. Peugeot 403 + 404 rear only. For brake drum diameter 255

mm. Brake lining width: 35 mm. Or. No. 4238.62. These brake shoes replace the old Peugeot numbers: 4238.61 + 4239.11 + 4240.16 + 4235.16 + 4245.17.

Brake shoes to rivet. Drum = 228 mm, diameter = 40mm wide. (189x40x5mm + 244x40x5mm). Peugeot 304

Renault R4, R5, R12 Break, R16.

Brake shoe set rear, system Bendix. Drum diameter: 180mm. Lining-wide: 42mm. Suitable for Peugeot

104. Citroen LNA. Renault R12, R14, R18.

Brake shoe set rear, system Lucas. Drum diameter: 180mm. Lining-wide: 42mm. Suitable for Peugeot

104. Renault R12 + R18. Citrien LNA. Or. No. Peugeot: 4238.43. Citroen: 75517323. Renault: 7701201227 + 7701201674.

Brake shoe set rear. Brake system: Bendix. Drum diameter: 228mm. Lining-wide: 42mm. Suitable for

Peugeot 204 + 304. Renault R12, R17, R20. Or. No. Peugeot: 4241.94

Brakes bleeder device! Working pressure 5-8 bar, max. vacuum 60%, capacity 1L,

Brake eccentric repair kit. Suitable for Peugeot 203, 403 + 404. This spare part was not available

as an original part. However, as the square drive on the original eccentric is often worn, this is a repair option. To do this, the original eccentric must be drilled off the brake anchor plate. The new repair kit can then be fitted.

Brakes cleaner 500ml, spray bottle, removes even other filth,

Brake spring pliers for drum brake. 215mm long. One end grips on the brake lining, the other hooks

onto the spring

Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction

1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of

construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of

construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Brake fluid reservoir made of glass (jam jar!). These reservoirs were fitted to many Renault +

Peugeot cars. E.g. Renault R4, Dauphine, Floride, Estafette etc.. Original NOS old stock. The rubber connection at the bottom was renewed.

Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV to year

of construction 1963. Peugeot 202, 203, 403, 404. Renault rear engine, R4. Diameter: 57mm. Reservoir height with locking cap: 97mm. Threaded connection on the master brake cylinder: 3/4 16h. Made in Spain.

Brake fluid reservoir connection rubber. For the connection from the glass container to the master

brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 6.0mm. This system of the securement was used by many france classic car`s. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.

Brake fluid reservoir connection rubber. For the connection from the glass container to the master

brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 8.0mm. This system of the securement was used with many französichen car. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.

Brake hose adapter from 1/2x20 (male) UNF on 3/8x24 UNF (female). (for large Hydrovac) Made in

France

Brake hose adapter from 7/16x24 UNF auf 3/8x24UNF. Made in France

• Suitable for this article
• 
  Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.
  0,51 €

Brake hose adapter from 7/16x24 UNF on 3/8x24UNF. Made in France

Brake line wrench. 10mm + 11mm. Workshop quality.

• Suitable for this article
• 
  Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

• Suitable for this article
• 
  Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €

Brake light switch Visa/C15/LNA for Peugeot 104, M10x1.

Stop light switch, 2 pole. Thread: M10 x 1. Suitable for Renault R4, R5, R16. Citroen AX, BX, CX

starting from year of construction 1981. Peugeot 205, 504, 505. Talbot Samba.

Stop light switch, mounts at the master brake cylinder. Thread: 7/16 x 20UNF. Suitable for Renault

R4, of year of construction 1961 to 1970. Renault Estafette, R8, R10. Peugeot 204, of year of construction 1966 to 1969. Simca 1000.

Brake caliper (1 piston) at the rear left, with integrated parking brake. Brake system Bendix

Piston diameter: 30mm. This brake caliper is installed at many Peugeot 205, Renault R5 Super. Or. No. 440161, 441007, 440161, 7701202142

Brake caliper (1 piston) at the rear right, with integrated parking brake. Brake system Bendix

Piston diameter: 30mm. This brake caliper is installed at many Peugeot 205, Renault R5 Super. Or. No. 440162, 441008, 440162, 7701202143

Brake hose copper sealing ring. Dimension: 10 x 16 x 1mm.

Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.

Brake hose copper sealing ring. Dimension: 13 x 19 x 1,5mm. Peugeot Or. No. 461001

Brake hose copper sealing ring. Dimension: 14 x 18 x 1,5mm.

Brake hose copper sealing ring. Dimension: 15 x 20 x 1,5mm. Peugeot Or. No. 444201

Brake hose in front, suitable for Citroen 11CV (to year of construction 1957). Simca 6. Panhard

Dyna (starting from year of construction 10/1954). Thread: 11/16 16. Length: 390mm.

Brake drum waer gauge. Used to measure the wear limit on brake drums as well as to measure the

diameter of the drum and then set the shoe position prior to drum re-fitting. Max size drums 400mm diameter. Brake drum wear gauge. Size range 160mm-400mm. Selected steel. Measures drum wear. Metric and Imperial scale

Brake drum spring hook from HAZET. Extremely useful when fitting springs to the brake drum. Also

ideal for fitting the rubber rings to the seats of 2CVs and Dyanes!

Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a Peugeot 404 Hydrovac

brake system, you need this tool. The internal spring is very stubborn without this tool!

Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for hydraulic brake systems

For lubricating cylinder liners and pistons. Extends the service life of brake cylinders. Protects against corrosion. Compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids. Keeps sleeves soft. Supports the installation of O-rings, lip seals, sleeves and other sealing elements made of rubber-elastic materials. Apply brake cylinder paste thinly and evenly on the surfaces to be lubricated. Attention: If you are installing a new wheel brake cylinder in your classic car, please coat the pistons and sleeves with this paste before installation. This will increase the longevity of the new brake parts on cars that are driven occasionally.

Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or. No. 2117.48

• Suitable for this article
• 
  P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404
  26,19 €

Bush in the fly wheel. Suitable for Peugeot 204, 304, 404, 504. Inside diameter: 12mm. Outside

diameter: 15mm. Height: 15mm.

Bush in fly wheel Peugeot 104, 204, 304, 404, 504, 505. Inside diameter: 12mm. Outside diameter

15mm. Height: 12mm.

Outside micrometer 0-25mm. Optimal for the actual dimension determination of kingpins.

Chassis paint spary can 400ml colour black matt, best for chassis parts, lasting flexibility

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Choke cable with oval knob. Suitable for Citroen 11CV/15CV, starting from year of construction

07/1952. Length: 810mm. This choke cable can be installed also universal. Or. No. 723171

Choke cable Peugeot, does not illuminate. Suitable for Peugeot 104, 204, 304, 404 (to year of

construction 1966), 504. Length totally: about 1650mm. Sleeve lengthens: 1410mm.