for Peugeot Alle

DP 203/403, collar steering gear. Suitable for Peugeot 203 + 403. Or. No. 4067.04

P 203/403, air filter. Suitable for Peugeot 403 + Peugeot 203. Length: 280mm

P 203/403, collar for the tank neck, above (fixture for the tank neck). Suitable for Peugeot 403

sedan. Or. No. 1515.04 + 1515.05. no reproduction!

P 203, nut for the shaft of the water pump. Suitable for Peugeot 203 + 403. Or. No. 1251.04

P 203/403, M10 nut (hexagonal pipe nut) on engine mount (screw connection of engine bracket to

engine mount). Suitable for Peugeot 203 + 403. Or. No. 1811.12

P203/403, Oil suction pipe at the bottom of the oil pump (Eaton oil pump). Dimension: 12x42

Suitable for Peugeot 203 + 403. Orignal NOS spare part from Peugeot. Or. No. 1039.06

P 203, headlight chrome ring, version CIBIE. For Peugeot 203 + 403. Outside diameter: 225mm. Inside

diameter: 175mm. Overall height: 32mm. The chrome ring has no hole for fastening!

P 203/403, screw 12x99mm, for the securement from the direct current generator. Suitable for

Peugeot 203 + 403. Or. No. 5703.06

P 203/403, bonded-rubber bushing mounting plate spring in front, Peugeot 203 + 403. Measurements

12 x 54 x 25 x 50mm. Or.Nr.503213

P 203/403, bonded-rubber bushing mounting lever shock absorber. Peugeot 203 + 403. 12x30x30x24mm

P 203/403, bonded-rubber bushing for the upper wishbone. Mounting above for the shock absorber

Suitable for Peugeot 203 + 403. Measurements: 12 x 44 x 25 x 40mm. Or.No. 524803

P 203/403, bonded-rubber bushing anti roll bar rod rear straight over the rear axle. Peugeot 203 +

403. 12x30x30x24mm

P 203/403, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie

rod. Peugeot 203 + 403. 12x30x30x24mm. 5248.04

P 203/403, bonded-rubber bushing, wishbone fixture. Measurements: Inside 12mm, outside 32mm, length

43mm. Inside 50mm, outside 34mm.

P 203/403, clamping piece on battery mounting bracket, for Peugeot 203 + 403. Or.Nr. 561701

1

P 203/403, fusion rubber for the fuel tank. Suitable for Peugeot 203, 1 series. Inside diameter

about 54mm. Length: 85mm. Peugeot 403 Pick Up.

P 203/403, water pump for Peugeot 203 + 403 (D3A D4A, D4B). The fan is uncouplable. Axle belt

pulley 15mm, the bearing comes from SKF. Or. No. 120243. Caution: The P 203 has an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  P 203, buckle rubbers for the water pump. Suitable for Peugeot 203. 1x inside
  2,77 €

P 203/403, water pump for Peugeot 203 + 403 (D3A, D4A, D4B). Firm fan. The water pump is supplied

with belt pulley. Or.Nr. 120117. Caution: The P 203 has an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  P 203, buckle rubbers for the water pump. Suitable for Peugeot 203. 1x inside
  2,77 €

P 203/403, Ignition cable set. Suitable for Peugeot 203 + 403. Attention: This ignition cable set

only fits the original spark plug connectors!!! This ignition cable set does not fit the electrode extension 72003!

• Suitable for this article
• 
  Spark Indicator. This non-contact spark tester will test for the presence of
  17,76 €

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.30

oversize. Diameter crankshaft: 44,675 to 44,691mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.15

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.50

oversize. Diameter crankshaft: 44,475 to 44,491mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.16

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension

Standard dimension. Diameter crankshaft: 44,975 to 44,991mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.14 + 0606.01.

P 203/403/404, clutch release sleeve such as original (with graphite coil). Suitable for Peugeot of

203. 403 + 404 with C3 gearbox. Diameter graphitic coil: 60mm. Inside diameter graphitic coil: 35mm. Total width: 96mm. The clutch release sleeve is supplied in a strengthened version. Or. No. 2041.11. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

• Suitable for this article
• 
  P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot
  5,21 €
• 
  P 403/404, release bearing fixing clip (short version). Suitable for all
  2,29 €

stoplight switch in brake master cylinder, Peugeot 203, 403, 404. thread 1/2x20, UNF/

• Suitable for this article
• 
  Brake hose copper sealing ring. Dimension: 13 x 19 x 1,5mm. Peugeot Or. No
  0,64 €
• 
  Brake hose copper sealing ring. Dimension: 15 x 20 x 1,5mm. Peugeot Or. No
  0,71 €

P 203/403/404, seals (6 item) for the SEV wiper axles. For diameters: 5,0mm. Screwed joint: 7,9mm

Suitable for Peugeot 203, Peugeot 403, Peugeot 404

P 203/403/404, seals (6 item) for the SEV wiper axles. For diameters: 6,0mm. Screwed joint: 8,9mm

Suitable for Peugeot 203, Peugeot 403, Peugeot 404

P 203/403/404, bearing bolt oil pump, suitable for Peugeot 203, 403, 404 (only 404 with 3x

crankshaft bearings). Or. No. 1035.03

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 20

UNF. Or. No. 4402.10. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, to 2757587 + 2819484. Peugeot 403 rear on the right, starting from 2757588, 2819485 (with that 403 the mounting of the brake line was changed). Peugeot 404 rear on the right.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 24

UNF. Or. No. 4402.11. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, starting from 2757588, 2819485. Peugeot 403 rear on the right, starting from 2757587, 2819484 (with that 403 the mounting of the brake line was changed). Peugeot 404 at the rear left.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, wheel brake cylinder in front. 1 piston, diameter 1 1/4 inch. (31,75mm). Without

t vent screw. Mounting board bore 22mm, brake line connector 11mm,7/16x20 UNF, length over all 63,5mm. Made in France

• Suitable for this article
• 
  Flange screw 7/16x20UNF for 6,5mm line. Length + wide ones over everything: 12
  2,77 €
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, camshaft drive chain, 64 chain links (duplex, double chain). Suitable for Peugeot

203, 403 + 404. Or. No. 0816.06

P 203/403/404/504, brake shoe mounting kit for servo brake (Mastervac) at rear. Suitable for

Peugeot 203, 403, 404, 504. For saloon, coupé and convertible. Consisting of: 2x 4375.16, 2x 4308.06, 4x 4312.06, 4x 4315.08, 2x 5363.01. Total length of springs: 132.5mm + 65mm.

P 203/403/404/504, grease cap out of sheet metal. Diameter: 66mmm. Suitable for Peugeot 203, 403

404, 504 (to year of construction 1976). Or. No. 3740.07

P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404

404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17

P 203/403/404/504, wheel bearing shaft seal in front. Suitable for Peugeot 203, 403, 404, 504

Dimension: 42 x 62 x 10mm. Or. No. 3724.08

P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm

Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09

P 203/D3A, wheel brake cylinder in front, 31.75mm piston diameter, Peugeot 203 starting from year

of construction 07/1954 to production end. Mounting board bore = 36 mm, brake line connector = 7/16x20 UNF, length over everything = 68 mm. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/Fregate, headlamp casing CIBIE, out of sheet metal. Suitable for Peugeot of 203, for 180mm

CIBIE headlight inserts. Renault Fregate, only for small diameter (210mm overall diameter, CIBIE headlight insert with 180mm). Very beautiful reproduction.

P 203/Simca, wheel brake cylinder in front. Piston diameter: 28,57mm (1 1/8 inch). Suitable for

Peugeot 203 + Simca Aronde, Renault G80, Ford Vedette. Brake line connector: 7/16x20 UNF. Mounting board bore: 36 mm. Length over everything: 67 mm. Or. No. 4401.08. Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203C, seal above on the windshield. Seal above at the windshield frame. Suitable for Peugeot 203

Cabriolet. Or. No. 8451.03

P 203C/403C, rubber stop above, for the door disk (end stop). 2 item. Suitable for Peugeot 203

Cabriolet + 403 Cabriolet. Or. No. 9306.01 + 9306.02

P 204 BREAK, exhaust pipe in front, from the manifold to the double silencer. Suitable for Peugeot

204 BREAK.

• Suitable for this article
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 204, supporting pin for the hand brake cable (primary). Suitable for Peugeot 204. Diameter: 20mm

Construction length: 28mm. Or. No. 4746.02

P 204, rubber intake seals (4 pieces) for inlet manifold. Suitable for Peugeot 204 up to the year

of construction 1969. Inner diameter: 29mm. These rubber seals connect the carburettor spider to the cylinder head. Over the years, they can become cracked, allowing unwanted air to enter. Remanufactured from silicone. Ref. no. 0348.15

P 204, clutch release sleeve Peugeot 204. For clutch Ferodo 200 DPP (200mm) + LUK TS 190 (190mm)

Or. No. 204125.

P 204, clutch release sleeve Peugeot 204. For clutch Ferodo 180 DP (180mm). Outside diameter

81.5mm. Inside diameter: 48mm. Overall height of the bearing: 23mm. Overall height over everything: 33mm. Or. No. 2041.18

P 204, control lever for the heating - air inlet (original Peugeot). Suitable for Peugeot 204. Or

No. 6493.02

P 204, cable heater adjustment. Peugeot 204 all models, Installed from 1966 to 1969. NOS Peugeot

Or. No. 6473.16

P 204, Rear brake hose. Fits Peugeot 204, probably up to 1966. Length: 287mm. Thread inside: 3/8 x

24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts with thread offset at the bottom! From approx. year of manufacture 1966 onwards, the flare screws have been replaced by a full thread! Or. No. 4816.09. Made in Europe.

spare parts catalog Peugeot 204