for Peugeot Alle

indicator cap (side light) P404 front white-orange, silver frame

indicator cap (side light), white-orage Peugeot 404 chromed frame. Still usable reproduction from

South america. with test symbol!

P 404, turn signal cap rear. Suitable for Peugeot 404 Cabriolet + 404 Coupe. Version: Carello.

• Suitable for this article
• 
  P 404, taillight cap red. Suitable for Peugeot 404 Cabriolet + 404 Coupe
  48,49 €

indicator lamp orange front complete Peugeot 404 with support, frame chromed original, or.no. 630237

P 404, front left floor panel, Peugeot 404. Time intensive manual reproduction. Very similar in

appearance, almost like the original sheets.

P 404, front left floor panel, Peugeot 404. Simple reproduction. Suitable for saloon, estate

pick-up, coupé, convertible (with some adjustments).

P 404, front right floor panel, Peugeot 404. Time intensive manual reproduction. Very similar in

appearance, almost like the original sheets.

P 404, front right floor panel, Peugeot 404. Simple reproduction. Suitable for saloon, estate

pick-up, coupé, convertible (with some adjustments).

floor panel Peugeot 404, fits left or right side. Made in Europe.

shock absorber rear P404 Break 1960 till 03/1964, two pieces!

P 404, brake shoes for Peugeot 404 without brake assist (without brake booster). Brake drum

diameter: 255 mm. Brake lining width: 60 mm. Suitable for Peugeot 404 saloon, convertible + coupé. Or. No. 4235.34 + 4235.26 + 4235.97 + 4238.55

P 404, rear brake shoes for Peugeot 404 with or without brake booster (brake servo). Brake drum

diameter: 255 mm. Brake lining width: 45 mm. Suitable for Peugeot 404 saloon, convertible and coupé.

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1965 to 1967. Or. No. 4308.13. Consisting of: 4x spring 437515. 2x spring 437517. 2x spring 437518.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  26,68 €

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1967 to 1968. Or. No. 4308.03. Consisting of: 4x spring 437521. 4x spring 437522. Length long spring (without hooks): 23,30mm. Short spring lengthens (without hooks): 10,0mm.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  26,68 €

P 404, front brake shoes. Suitable for Peugeot 404 saloon, convertible and coupé with Hydrovac

brake booster. Brake drum diameter: 280 mm. Brake lining width: 65 mm. Brake shoe dimensions: 300 x 65 x 7 mm. Or. No. 4238.58 + 4235.92 + 4235.93 + 4235.50

P 404, brake shoe set in front. Suitable for Peugeot 404 to year of construction 07/1970. System

Bendix, drum diameter 280mm, lining-wide 67mm

P 404, brake power controller. Suitable for Peugeot 404 (petrol) from year of construction 1967

until end of production. Connecting thread: 3/8 x 24UNF. Or. No. 4861.07

Brake light switch for Peugeot 404 as from Pedalerie.

P 404, brake disk in front (1 piece). System Bendix. Suitable for Peugeot 404, starting from year

of construction 10/1968. Diameter: 285mm. Heavy one: 10mm. Interior hole diameter: 80mm. 3 hole securement. Or. No. 4246.46

brake hose rear Peugeot 404U, length 270mm, both side threat 3/8-24h Made in Spain.

brake hose Peugeot 404 rear, length 399mm, 3/8x24+5/8x18, 3/8x24 + 5/8x18. Made in Spain.

brake hose Peugeot 404. rear 72-80, length 205mm, C15, Peugeot 305. connection male thread 2x M10

10

P 404, brake hose in front, suitable for Peuegot 404 with brake assistance to year of construction

1966. Length: 354mm. Thread: 3/8 x of 24 male threads, 3/8 x of 24 female threads + 5/8 x of 18 male threads. Suitable for vehicles with 4,5mm brake hose. Made in Spain. Note : 404 without Hydrovac all had 7/16" until about 1966. The new lines with 3/8" thread appeared with the Hydrovac.

P 404, brake hose in front, suitable for Peugeot 404 to year of construction 1966. Length: 354mm

Thread: 7/16x20 + 5/8x18 + 7/16x20. Suitable for vehicles with 6,35mm brake hose. Or. No. 480607. Made in Spain.

P 404, chassis beam front left with reinforcement spar. This chassis beam consists of the outer

plate and inner reinforcing spar. Or. No. 7212.08

P 404, front left chassis member. This chassis member is only the outer panel, without inner

reinforcement.

P 404, chassis beam front right with reinforcement spar. This chassis beam consists of the outer

plate and inner reinforcing spar. Or. No. 7213.02

P 404, front right chassis member. This chassis member is only the outer panel, without inner

reinforcement.

P 404, seal above, for the tail lamp. Suitable for Peugeot 404 sedan + Cabriolet (Coupe). Or. No

6344.15

P 404, seal headlamp casing in the fender! For Peugeot 404. Made in Germany.

P 404, seal down, for the tail lamp. Suitable for Peugeot 404 sedan + Cabriolet (Coupe). Or. No

6344.16

P 404, seal under the parking light - indicator. Suitable for Peugeot 404 sedan + cabriolet, to

year of construction 1964 (salon 1965). Or. No. 6304.06

P 404, throttle valve adjustment for Kugelfischer injection. Suitable for Peugeot sedan 404 to

series 8231077. 404 Cabrio + Coupe to 4599971. Or. No. 1653.19

P 404, thrust piece gear rack. Suitable for Peugeot 404. Or. No. 4062.02

P 404, intake manifold seal. Suitable for Peugeot 404 Injection. Or. No. 0348.13

P 404, spring plate in front. Diameter: 145mm. Suitable for Peugeot 404. Per piece

Window lifter door in front on the left, Peugeot 404

Window lifter door in front on the right, Peugeot 404

P 404, set of floor mats (4 pieces). Velour Exellence beige with beige vinyl border trim (front +

rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 404, set of floor mats (4 pieces). Velour Exellence dark blue (Bleu marine) with light grey (Gris

clair) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 404, set of floor mats (4 pieces). Velour Exellence dark grey (Gris foncé) with light grey (Gris

clair) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 404, set of floor mats (4 pieces). Velour Exellence light grey (Gris clair) with dark grey (Gris

foncé) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 404, gearbox fixture rear, suitable for Peugeot 404. For gearbox BA7. This fixture can be used

also for the C3 gearbox. You must used only longer pins. Or. No. 1843.39

Glass for license plate light clearly,left Peugeot 404 Cabrio

Glass for license plate light clearly,right, Peugeot 404 Cabrio

P 404, rubber cover for the window lifter mechanism (down in the door). Suitable for Peugeot 404

Cabriolet + Coupe. Or. No. 9033.05

Rubber stop angular rod arm (front axle) for Peugeot 404. Place of installation is below. Or.no

351409

P 404, rubber stop down, for the strut, at the front axle. Suitable for Peugeot 404. Thread: M 8 x

18mm. Diameter: 45mm. Height: 52mm. Or. No. 351412

P 404, rubber seal, for the steering column in the interior. Suitable for Peugeot 404. Or. No

4152.12

P 404, rubber seal for the clutch pedal in the engine front wall. Suitable for Peugeot 404. Or. No

2131.08