P 404, crankshaft bearing, standard dimension. Suitable for Peugeot 404, before year of
construction 1970. Only for engine: XC5 (5 crankshaft bearings).
for Peugeot Alle
3049 Articles | Page 37 of 61
P 404, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, before year of construction
1970. Only for engine: XC5 (5 crankshaft bearings).
P 404, steering gear (new part). Suitable for Peugeot 404, to year of construction 1973. The
steering gear is supplied without tie rods. Before assembly, please grease the steering gear (ca.60g).
P 404, steering column cover, suitable for Peugeot 404 Coupe + Cabrio! Note: Casting of a used
well preserved lining! Produces in complex manual work. Not perfectly, but substantially better than the most Installed linings!
P 404, air filters. Suitable for Peugeot 404, starting from year of construction 03/1968
Corresponds to PURFLUX A172. Height: about 130mm. Outside diameter: about 118mm. Inside diameter: 84mm. Or. No. 1445.29
P 404, air hose between carburettor + air filter (bent hose 180°, without additional connection)
Suitable for Peugeot 404.
P 404, suspension strut sleeve (bellows on the shock absorber). Suitable for Peugeot 404 (1
assembly, 90mm) up to the year of construction 1964! Or. No. 5254.02
P 404, clutch disk. Suitable for Peugeot 404 Cabrio + Coupe, starting from year of construction
1967. Dimension: 215 x 142 x 3,2mm. Hub profile: 29,4mmx24,5mm. 10 teeth.
P 404, front lower cross member. Suitable for Peugeot 404 with petrol engine (sedan, convertible
coupe, pick-up). Or. No. 7103.12
P 404, wheel suspension repair set in front (wishbones), per side. Suitable for Peugeot 404
Consisting of: Rubber block squarely with 24mm bore, 1x bush 29x32mm, 2x bush 16mm inside diameter - outside diameter 25 x 30mm - length 17mm, 1x bonded-rubber bushing 16mm inside diameter - outside diameter 34mm - length 41,5mm. The pin has 14mm diameter.
P 404, wheel suspension repair set in front, per side. Suitable for Peugeot 404. Consisting of: 1x
bush inside diameter 12 x 34mm - outside diameter 28 x 32mm. 2x bush inside diameter 16mm - outside diameter 25 x 30mm - length 17mm, 1x bush largely inside diameter 12 x 50mm - outside diameter 32 x 34mm. 2x pin 12mm diameter.
- Suitable for this article
P 404, wheel brake cylinders rear on the left. System Bendix. Piston diameter: 20,64mm. Connecting
thread: 3/8 x 24UNF. Mounting board bore: 35,7mm. Construction length: 70mm. Suitable for Peugeot 404, all models Saloon. Of year of construction 10/1967 to 05/1968. 404 all Thermostable Saloon, from 1966 to 10/1969. 404 models USA, starting from 1966. Or. No. 4402.22, Made in Europe.
P 404, wheel brake cylinders rear on the right. System Bendix. Piston diameter: 20,64mm. Connecting
thread: 3/8 x 24UNF. Mounting board bore: 35,7mm. Construction length: 70mm. Suitable for Peugeot 404, all models Saloon. Of year of construction 10/1967 to 05/1968. 404 all Thermostable Saloon, from 1966 to 10/1969. 404 models USA, starting from 1966. Or. No. 4402.23, Made in Europe.
P 404, wheel brake cylinders in front (on the left + on the right are identically constructed)
Suitable for Peugeot 404, with Hydrovac brake assembly (thermostable). Piston diameter: 34,92mm. Overall length: 82mm. Brake line connector: 3/8 x 24 UNF. Distance of the fixing bolts: 44mm. With vent screw! Or. No. 4401.30. Made in France
P 404, wheel brake cylinders in front (on the left + on the right are identically constructed)
Suitable for Peugeot 404, with Hydrovac brake assembly (thermostable). Piston diameter: 34,92mm. Overall length: 82mm. Brake line connector: 3/8 x 24 UNF. Distance of the fixing bolts: 44mm. Without vent screw! Made in France
P 404, set (13x) spring washers "Belleville" in the steering gear, for the left tie rod. Suitable
for Peugeot 404. Or. No. 3839.02
P 404, shift linkage repair set (for the shift linkage at the steering column). Suitable for
Peugeot 404, starting from year of construction 10/1967.
P 404, shift linkage repair set, for the steering columm gear shift change. Suitable for Peugeot
404, to year of construction 1967.
P 404, box sills - reinforcement. The reinforcement fits on the left + on the right. Per piece
Suitable for Peugeot 404 Cabriolet. Made in European Union.
P 404, sill panel left (not the panelling of the sill), with all beads and indentations. Suitable
for Peugeot 404 saloon. Good reproduction of the original.
P 404, sill panel right (not the panelling of the sill), with all beads and indentations. Suitable
for Peugeot 404 saloon. Good reproduction of the original.
P 404, bonded-rubber bushing A-arm. Suitable for Peugeot 404. Inside diameter: 12mm. Outside
diameter: 32mm. Length inside: 50mm. Length outside: 34mm. Or. No. 3561.04
P 404, bonded-rubber bushing for the wishbone. Suitable for Peugeot 404. Inside diameter: 12mm
Outside diameter: 28mm. Length inside: 38mm. Length outside: 32mm. Or. No. 3523.09
P 404, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie rod
Peugeot 404. 12x30x30x24mm
3049 Articles | Page 37 of 61
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
