P 404, rubber stop down, for the strut, at the front axle. Suitable for Peugeot 404. Thread: M 8 x
18mm. Diameter: 45mm. Height: 52mm. Or. No. 351412
for Peugeot Alle
3051 Articles | Page 36 of 62
P 404, rubber buffer (first version) for the folding license plate handle rear (fuel filler flap)
Suitable for Peugeot 404 sedan + 404 Cabriolet + Coupe. Or. No. 7554.05
P 404, hand brake cable in front. Suitable for Peugeot 404. Length totally: 1978mm. Sleeve: 1300mm
Or. No. 4834.34. Made in France.
P 404, master brake cylinder sealing set (2 circle brake system). Piston diameter: 19,0mm. Suitable
for original master brake cylinders 4601.25 / This master brake cylinder are installed only for export models into the following countries: USA, Switzerland, Norway, Sweden.
P 404, master brake cylinder, single circuit brake system, suitable for Peugeot 404, from year of
construction 07/1960 to 10/1966 (not Thermostable). Piston 25,4mm. (1 inch). Reproduction
P 404, master brake cylinder, 31.75mm piston. Suitable for Peugeot 404, all models LD Thermostable
starting from year of construction 1965. Peugeot 404 all Thermostable, starting from year of construction 02/1966. Peugeot 404 all models U6A, starting from year of construction 1966. Installation opening in the engine front wall: 42mm. Follower depth for the actuation: 50mm. Securement: 8,5mm diameter, 60mm from center to center. Thread for the brake fluid reservoir: 3/4 x 16h. Made in Europe.
Tail - Shutter. Suitable for Peugeot 404 coupe. Quickly installed (the brackets are only inserted
into the upper and lower rear window rubber). A typical accessory from the sixties. Made in France
Tail - Shutter. Suitable for Peugeot 404 sedan. Quickly installed (the brackets are only inserted
into the upper and lower rear window rubber). A typical accessory from the fifties. Made in France
P 404, inside roof linings completely (white). Material: tissu blanc cassé de diamond pointe
Suitable for Peugeot 404 Coupe.
P 404, Hydrovac repair set for brake booster, inclusive large diaphragm. Suitable for Peugeot 404
Renault 8 + Renault Saviem.
P 404, license plate light cap, suitable for Peugeot 404. Note: Only the cap is supplied. The total
tail lamp is not supplyable any more.
P 404, pistons + liner (1 piece), suitable for Peugeot 404, starting from year of construction
1965. For engine: XC5A, XC5P, XC6, KF1, KF2, CKF (3 + 5 crankshaft bearings). Engine capacity: 1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,20mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
P 404, pistons + liner (4 pieces), suitable for Peugeot 404 (carburetor, 404L, 404 U6 with 3 + 5
crankshaft bearings). Engine: XC5, XC5P (second mounting). Engine capacity: 1618ccm. Compression: 7,6: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
P 404, pistons + liner (4 fittings), suitable for Peugeot 404. For engine: XC6. Engine capacity
1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,00mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
P 404, pistons + liner (4 fittings), suitable for Peugeot 404. For engine: XC5. Engine capacity
1618cc. Bore: 84mm. Piston pin: 23 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
P 404, pistons for brake caliper. Brake system Girling. Diameter: 34mm. Suitable for Peugeot 404
of year of construction 1967 to 09/1968. For brake calipers with 3 pistons! Height over everything: 28mm. Height to collar: 26mm.
P 404, ball bearing for the top of the suspension strut (strut mount). Suitable for Peugeot 404
Outer diameter: 83.5mm, inner diameter: 60.1mm, thickness: 8.7mm. Or. No. 5035.04.
P 404, radiator hose for radiator expansions tank from synthetic (round). Suitable for Peugeot 404
Inside diameter both sides: 8-10mm. Or. No. 1302.09
P 404, radiator hose for the radiator expansion tank made of metal. Suitable for Peugeot 404
Inside diameter both sides: 15,0mm. Or. No. 1302.18
P 404, radiator hose for the heating. Suitable for Peugeot 404. Overall length: about 900mm. At the
end about 90° bent (1x upward, 1x downwards). Inside diameter: about 15mm.
P 404, radiator hose for the heating. Suitable for Peugeot 404. Overall length: about 900mm. At the
end about 90° bent. Inside diameter: about 15mm.
P 404, radiator hose for the heating. Suitable for Peugeot 404. Inside diameter: 16mm. Outside
diameter: 24mm. Or. No. 6458.33 + 6458.30
P 404, radiator hose reduction connection for the water pump. Suitable for Peugeot 404. Inside
diameter: about 40mm + 34mm. Overall length: ca.63mm. Or. No. 1350.27
P 404, radiator hose down. Suitable for Peugeot 404, of year of construction 1960 to 1966. For
connecting diameter at the radiator: 41mm. Or. No. 1350.15
P 404, radiator hose, for inlet to the heater radiator. Suitable for Peugeot 404, starting from
year of construction 1960. Inside diameter: 15,0mm.
P 404, radiator hose. Suitable for Peugeot 404. Overall length: about 550mm. At the end of 90°
bent. At the bent side are 8mm inside diameter. At the opposite side are 12mm inside diameter.
3051 Articles | Page 36 of 62
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
