for Peugeot Alle

P 204/304, rubber intake manifold grommets (4 pieces). Suitable for Peugeot 204/304 from 1969 years

of construction. Inner diameter: 31mm. These rubber grommets connect the carburettor spider to the cylinder head. Since they become cracked over the years, unwanted air can enter there. Re-manufactured from silicone. Or. No. 0348.20

P 204/304, drive shaft, fits on the left of or on the right. Peugeot 204 + 304. Overall length

740mm. External toothing: 23 teeth both sides.

P 204/304, collar drive shaft gearbox side. Suitable for Peugeot 204 + 304. Diameter: 21mm +

67,5mm. Amount: 65mm. Or. No. 3287.14

P 204/304, collar drive shaft wheel side. Diameter 78+20mm

P 204/304, collar drive shaft wheel side. Suitable for Peugeot 104, 204, 304, 305. Diameter: 86 +

25mm. Or. No. 3293.16

P 204/304, spacer 0,50mm heavily, for the steering worm. Suitable for Peugeot 204 + 304. Or.Nr

404916

P 204/304, exhaust pipe in front (manifold to silencer). Suitable for Peugeot 204, to year of

construction 09/1972. Engine: XK4 + XL4. Peugeot 304, to year of construction 09/1972. Engine: XL3, XL4, XL5. The exhaust pipe is not double in front. The pipe does not have preheating! Or. No. 1701.71 + 1701.13 + 1701.77 + 1701.78 + 1711.77 + 1717.71 + 1791.71

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 40,5mm. Length: 130mm
  6,70 €
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 204/304, exhaust pipe in front (solo connection at the manifold, not double!). Suitable for

Peugeot 204 + 304, of year of construction 1969 to 10/1980, which have a preheating at the exhaust pipe. Or. No. 1702.27

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 40,5mm. Length: 130mm
  6,70 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 204/304, exhaust adjustment pot in front, mounts at the exhaust elbow. Suitable for all Peugeot

204 + 304. 1720.07

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot
  4,86 €

P 204/304, control lever for the heating - air distribution (original Peugeot). Suitable for

Peugeot 204 + 304. Or. No. 6492.14

P 204/304, petrol filler hose (connection between tank and filler neck). Suitable for Peugeot 204 +

304. Or. No. 1504.10

Brake shoes mounting set Peugeot 204 + 304. For system Bendix, for 42mm wide brake shoes, 229mm

diameter.

brake blocks front, Peugeot 204, 304 system Girling (LUCAS) >07/68, breadth 63.5, height 55.2

width 14.4 with warning contact

P 204/304, brake pads front, system TEVES-ATE >07/1968 / Lucas-Girling. Width 63,3, height 55

5 Thickness 12,2. Fits Peugeot 203 / 304

P 204/304, brake disk set. Diameter: 257mm. Brake disk thickness: 10.0mm. Number of holes: 3

Suitable for Peugeot 204 + 304, to year of construction 1978. For wheel bolt diameter: 12,0mm. Or. No. 4246.48

P 204/304, Rear brake hose. Fits Peugeot 204 + 304, from probably 1966 to 1969. Length: 287mm

Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts through thread! Up to approx. year of manufacture 1966, the flare screws have a thread offset at the bottom! Or. No. 4816.09. Made in Europe.

P 204/304, lid for diaphragm pump (carburetor). Suitable for Peugeot 204 + 304. For carburetor

Solex: 32 PBISA + 34 PBISA. Or. No. 1406.41

P 204/304, lid rear, for starter motor. Suitable for Peugeot 204. Or. No. 5824.09

P 204/304, seal (spare type) for the luggage compartment lid. Suitable for Peugeot 204 Cabrio + 304

Cabrio. By meters!

P 204/304, seal for the water pump (rigid + disengageable fan). Suitable for Peugeot 204 + 304. Or

No. 1206.13

P 204/304, spring plate, rear above. Mounting of the shock absorber. Suitable for Peugeot 304

sedan. Peugeot 204, starting from chassis number: 9.064.001. Or. No. 5165.18

P 204/304, spring plate, front above. Mounting of the shock absorber. Suitable for Peugeot 304, to

chassis number 3.015.671. Peugeot 204 first version. Or. No. 5210.08

P 204/304, fresh air adjustment lever on the left (for the fresh air vent above in the dashboard)

Suitable for Peugeot 204, starting from year of construction 1969. Peugeot 304 all years of construction. Or. No. 8268.11. Original Peugeot, no reproduction (NOS).

P 204/304, fixture for the disk water hose (synthetic). Suitable for Peugeot 204 + 304. Or. No

6987.19

handbrake cable Peugeot 204+304 >70, length 1555/920mm fits rear left or right side

P204/304, hand brake cable Cabrio + Coupe, Installed starting from 10/1969. On the left + on the

e right fitting, 1270mm/775mm long. Not fitting for sedan!

main brake cylinder, two circle P. 304,204, piston 19,05mm, system Bendix 460172. Made in Europe.

P 204/304, main bearing (crankshaft bearing) 0.30 oversize (for journals 47.00 to 46.984mm). Fits

Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.02

P 204/304, main bearing (crankshaft bearing) 0.50 oversize (for journals 47.00 to 46.984mm). Fits

Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.03

P 204/304, main bearing (crankshaft bearing) standard size (for journals 47.00 to 46.984mm). Fits

Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.01

Rear window clear, Peugeot 2-304 Coupe no shipping, only pick up

P 204/304, back window seal. Suitable for Peugeot 204 Coupe + 304 Coupe.

P 204/304, V-belt pulley mounting kit, for direct current generator. Suitable for Peugeot 204 +

304. Or. No. 5746.04

P 204/304, clip for rubber, rear end panel to bumper, Peugeot 204/304 Cabrio.

P 204/304, piston for brake caliper, system Girling Lucas. Diameter: 48mm. Height: 29mm. Suitable

for Peugeot 204, of year of construction 1965 to 1969. Peugeot 304, to year of construction 1972.

P 204/304, radiator for Peugeot 204, Peugeot 304, all models. 325x358x35mm. Or. no. 1301.69

P 204/304, radiator hose down, suitable for Peugeot 204 (all petrols), 304 (1,4D), 305 (1.3 + 1,5L

petrols). Or. No. 1350.18

• Suitable for this article
• 
  Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band
  4,71 €

P 204/304, clutch master cylinder. Suitable for Peugeot 204 + 304, all model`s starting from year

of construction 10/1968. Piston diameter: 19,05mm. Connecting thread: M12x1. Fixing holes distance: 50mm. Or. No. 2095.09 + 2095.12. Made in Europe.

P 204/304, clutch taking cylinder repair set (only rubber). Suitable for Peugeot 204 + 304. For

piston diameters: 30mm.

P 204/304, bearing for the V-belt guide roller. Suitable for Peugeot 204 + 304. Or. No. 5752.02

P 204/304, bearing plate above on the rear shock absorber, for Peugeot 204 + 304. Or.Nr. 522110

P 204/304, steering gear bellows (2 item). Suitable for Peugeot 204 + 304, to year of construction

06/1978. Or. No. 4066.09

P 204/304, generator (new part). Suitable for Peugeot 204 + Peugeot 304. 12 V, 50 ampere. Paris

Rhone A13N226. Or. No. 5705.42 + 5705.67

P 204/304, air filter. Suitable for Peugeot 204 + 304. Outside diameter: about 210-215mm. Height

about 63mm. Inside diameter: about 178mm. Corresponds to Purflux A422. Or. No. 1445.18

P 204/304, Mastervac (brake booster). Suitable for Peugeot 204 + 304 sedan + convertible, until

1975. For 1 circuit brake system! Diameter: 152mm. Or. No. 4535.40

P 204/304, clutch disk with torsion spring. Suitable for Peugeot 204 + 304. Year of construction

1968 to 1976. Diameter: 200mm. Teeth: 28. Or. No. 2054.46

P 204/304, clutch disk with torsion springs. Suitable for Peugeot 204 + 304. Diameter: 200mm

Teeth: 14.

P 204/304, clutch disk without torsion springs. Suitable for Peugeot 204 + 304. Diameter: 200mm

Teeth: 14. Or. No. 2054.63

P 204/304, engine gasket set, inclusive Shaft seals + ventil stem sealing. Suitable for Peugeot

204, 304S, 305. For engine: XK5, XL5S, XL5 (1127cc to 1472cc). Or. No. 0198.10

• Suitable for this article
• 
  P 204/304/305, bottom liner seal (4x). Suitable for Peugeot 204, 304, 305. Only
  21,72 €

P 204/304, engine suspension above. Suitable for Peugeot 204 + Peuhgeot 304. Petrol + Diesels

Installed from year of construction 1968 to 1980. Or. No. 1843.40