for Peugeot Alle

Simca, engine gasket set completely. Suitable for Simca 1000 rally 2 + rally 3.

Simca, engine gasket set completely. Suitable for Simca Versailles V8 Aquillon 2388cc.

Simca, oil filter, suitable for Simca V8, CHAMBORD, ARIANE 8, VERSAILLES, TRIANON, REGENCE

BEAULIEU, MARLY, PRESIDENCE, VEDETTE

Simca, wheel bearing front + rear. Suitable for Simca 1000 + 1200, from 1963 to 1976.

Simca, wheel bearing set for the rear axle. Suitable for Simca 1000 from year of construction 1961

to 1978. Simca 1200 S, from year of construction 1968 to 1971. Contents: 2x identically constructed bearings. Outside diameter: 50,3mm. Inside diameter: 27,0mm. Overall height: 14,8mm.

Simca, lockcylinder for the door right (door lock), with 2 keys. Suitable for Simca 1307/1308

Original manufacturer Neiman. No reproduction.

Simca, lockcylinder for the door right (door lock), with 2 keys. Suitable for Simca 1307/1308

Original manufacturer Neiman. No reproduction.

Carburetor repair set for Simca 1000 rally 3. For carburetor Weber 2x40 DCOE.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Starter lock Simca (German version), suitable for Simca 1000, 1100, 1200S, 1301, 1501, Matra

Bagheera. Original manufacturer Neiman. No reproduction. Neiman No. 014711

Starter lock Simca, suitable for Simca 1000, 1100, 1200S, 1301, 1501, Matra Bagheera. Original

manufacturer Neiman. No reproduction. Neiman No. 014410

Starter lock Simca, suitable for Simca 1300, 1301, 1500, 1501. Original manufacturer Neiman. No

reproduction. Neiman No. 014510

Starter lock Simca, suitable for Simca 1307 + 1308. Original manufacturer Neiman. No reproduction

Neiman No. 014700

indicator cap front left Simca 1000

indicator cap front right Simca 1000

tail light cap left Simca 1000

tail light cap right Simca 1000

tail light cap left Simca 1100LS

tail light cap right Simca 1100LS

tail light cap left Simca 1307-1507 with chrome frame (Frankani)

tail light cap right Simca 1307-1507 with chrome fram (Frankani)

Simca/Panhard, wheel brake cylinder in front, 31.75mm piston diameter, Simca Vedette (type abeille)

before year of construction 1953, Panhard Dyna (4+5CV) before year of construction 06/1958. Mounting board bore = 36 mm, Brake line connector = 11 mm, length over everything = 68 mm. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Shaft seal (40 x 58 x 10) differential both sides. Suitable for Peugeot 204, 304, 305, 504, J7

Talbot Horizon, Samba, Solara. Inside diameter: 40.00mm. Outside diameter: 58.00mm. Heavy one: 10.00mm. Or. No. 3121.09. Made in Germany.

Shaft seal differential. Dimension: 28 x 45 x 8mm. Suitable for Renault 4 (first version)

Differential Peugeot 504, 505, 604. Made in Germany.

• Suitable for this article
• 
  R4/R5, O-ring for the drive shaft flange at the gearbox. Suitable for Renault
  3,37 €

Shaft seal for the camshaft. Dimension: 35 x 50 x 8. Suitable for Peugeot Diesel engines: XUD7

XUD9, XUD11 to year of construction 01/1994. Or. No. 0236.14

Shaft seal crankshaft (front side). Suitable for Peugeot 204 D, 304D (1,4L), 404D, 504D, J7D, J9D

Talbot express Diesel. Dimension: 42 x 60 x 8mm. Or. No. 0514.11

Oil seal ring crankshaft rear, 78x100x10mm, for Visa, LNA, C15, Peugeot 104, BX engine 109-5E +

129-5 Peugeot 205 Renault 14 Talbot Samba

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Suitable for R4 (955, 956, 1108cc), R5

Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15. Peugeot 504 V6, 604 V6, Citroen XM V6. Made in Germany.

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Improved version from silicone. Suitable

for Renault R4 (955, 956, 1108cc). R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15.Peugeot 504 V6, 604 V6, Citroen XM V6.

Shaft seal crankshaft rear. Suitable for nearly all Renault engines. Also for V6 engines by Peugeot

504, 604. Renault R30, Alpine A310. Dimension: 80x100x8mm. Or. No. 7700859692

Shaft seal crankshaft in front. Suitable for V6 Euroengine (PRV). Peugeot 504 V6. Peugeot 604 V6

6. Renault Alpine A310 V6, R30 V6. Dimension: 42 x 62 x 10mm.

Shaft seal camshaft. Dimension: 16 x 21 x 4,5. Suitable for Peugeot J5 petrol. Citroen C25 petrol

Peugeot 504 2.0 petrol. Peugeot 504 Diesel (1.9 + 2.3). Peugeot 505 petrol + Diesel. Peugeot J7 Diesel.

Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun 21155.

• Suitable for this article
• 
  Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to
  79,23 €

Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and

surface rust without harming the support material. It don`t cause any damage of rubber , glas or plastic, so a complicated covering is not neccessary. In opposite to sandblast, Soda protects the cleaned material against rust at once. Enviroment friendly and gently removal from different coatings on boats, wooden furniture, glas and window frames is possible. This blast gun is not suitable for sandblast usage. Operating pressure is 87-174 lbs. Minimum air consumption is 180 liter/minute at 120 lbs.

• Suitable for this article
• 
  Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun
  49,48 €

Festoon bulb 10W, 12 Volt. 11x43mm. Base SV8.5

Festoon bulb 18W, 12 Volt. 2CV for side indicator C-pillar. 15x43mm. Base SV8.5

Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik Up.....

Festoon bulb 5W, 12 Volt. 11x43mm. Base SV8.5

Sofitte 6 V, 10 Watts. 11x38mm, base SV8,5. e.g. back lights Citroen 11CV.

Festoon bulb, 6 volt, 10W, measure: 11x43mm, SV8,5

Festoon bulb 6 volt 18 W. 15x44mm. Base SV8.5

Sofitte 6 V, 5 Watts. 11x38mm, base SV8,5.

Festoon bulb 6 Volt, 5 Watt. 11x43mm. Base SV8.5

Solex, carburetor nozzle set, for Solex 32 PBIC. Suitable for Peugeot 203 + Citroen 11CV

Consisting of: 1x main jet 190. Hollow bolt with external 135 nozzle. 1x slow-running jet 60. 1x mixing tube. 1x hollow bolt with internally 125 nozzle + 1x 50 nozzle.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Mirror flexibly, with joint. 360mm lengthens. Mirror diameter 30mm.

Mirror Classic chromium-plates. Completely producef from metal. Mounting foot lengthens: 165mm

Hole spacing securement: 90mm. Diameter mirror glass: 110mm. Very solid version.

Mirror seal down, for CIPA mirror.

Mirror on the left, chromium-plates. Original French manufacturer "CIPA". Suitable for Peugeot 204

404, 504. Renault R4 to year of construction 1985. R5, R8, R10, R16 etc. Hole measurement: 65,5mm. Dimension mirror glass: 163 x 111mm. Made in France

Mirror on the left, chromium-plates. Original French manufacturer "CIPA". Suitable for Peugeot 404

504. Renault R4, R5, R8, R16 etc. Hole spacing: 65,5mm. Mirror measurement: 90x140mm. Made in France

Mirror Lucas Classic, on the left (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the right). Diameter: about 105mm.

Mirror Lucas Classic, on the right (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the left). Diameter: about 105mm. Mounting thread: M8