for Peugeot Alle
3051 Articles | Page 14 of 62
Control light blue, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light green, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light orange, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light red, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Fuel filter (gasoline filter) E113. Suitable for Peugeot 404 TI + Peugeot 504 TI. Outside diameter
53mm. Inside diameter: 12mm. Height: 45mm. Or. No. 1109.03 + 1903.03 + 1906.03 + 1906.10
Kugelfischer drive wheel (for the SEDIS timing belt) on the injection pump. Or. No. 1930.03
Suitable for Peugeot 404 TI (from serial number Sedan 4.570.001 + Convertible-Coupe from 4.594.001) + 504 TI all models. Made in Germany
Kugelfischer nozzle holder + injection nozzle (per piece). Or. No. 1979.07 (Bosch 8 492 801 227 +
7910 013 019) New part. Made in Germany.
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1
kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg
softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Radiator silent rubber (rubber block under the radiator securement). Suitable for Peugeot 204, 304
403, 404, 504, 505. Inside diameter: 10,5mm. Diameter: 28mm. Overall height: 12mm. Or. No. 1327,02/ Made in Germany
Radiator cap (made of metal), with seal. Suitable for Peugeot 504 V6 (Cabriolet + Coupe). 504
Diesel, 404 Diesel, 204 Diesel. Peugeot 104 petrol. Or. No. 1305.12
Radiator cap Peugeot petrol (0.28 bar). Suitable for Peugeot 204, 304, 404, 504, 604, 505. Amount
over everything: 26,50mm.
Radiator cap, for Peugeot Diesels + Citroen HY Diesel. Suitable for Peugeot 204 D, 304 D, 404 D
504 D, 505 D, 604 D. diameters: 56mm. Pressure disk diameter: 39mm.
Coolant drain plug on the engine block. Suitable for Peugeot 203, 403 + 404. The screw is supplied
with an O-ring. Or. No. 0156.05 + 0157.04
Plastic line (nylon) between clutch taking cylinder and clutch master cylinder (without ends)
Outside diameter: 6,3mm. Inside diameter: 4,3mm. By meters. Suitable for Peugeot 204, 304, 404, 504, 505, 604. Only use DOT3 + DOT4 (never use DOT5 or DOT5.1!).
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch line sealing ring (for the line between clutch taker + clutch transmitter). Suitable for
Peugeot 204, 304, 404, 504, 505, J7. Dimension: 6.5 x 10.2 x 7.5 mm. Or. No. 2091.03
Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204, 304, 404, 504, 505
J7. This sleeve is inserted to the end of the clutch line!
Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for Peugeot 204, 304
404, 504, 505, J7. Or. No. 2091.01. Note: There was plastic line with 6,3mm, 7,0mm + 7,3mm diameter. If necessary rebore the screw on that suitable diameter.
Crankshaft bearing, standard dimension. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D
J7D. Engine: XD/P85 + XDP90 (1816cc + 2112cc).
3051 Articles | Page 14 of 62
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
