clair) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
foncé) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
also for the C3 gearbox. You must used only longer pins. Or. No. 1843.39
Cabriolet + Coupe. Or. No. 9033.05
18mm. Diameter: 45mm. Height: 52mm. Or. No. 351412
Suitable for Peugeot 404 sedan + 404 Cabriolet + Coupe. Or. No. 7554.05
Or. No. 4834.34. Made in France.
for original master brake cylinders 4601.25 / This master brake cylinder are installed only for export models into the following countries: USA, Switzerland, Norway, Sweden.
construction 07/1960 to 10/1966 (not Thermostable). Piston 25,4mm. (1 inch). Reproduction
starting from year of construction 1965. Peugeot 404 all Thermostable, starting from year of construction 02/1966. Peugeot 404 all models U6A, starting from year of construction 1966. Installation opening in the engine front wall: 42mm. Follower depth for the actuation: 50mm. Securement: 8,5mm diameter, 60mm from center to center. Thread for the brake fluid reservoir: 3/4 x 16h. Made in Europe.
into the upper and lower rear window rubber). A typical accessory from the sixties. Made in France
into the upper and lower rear window rubber). A typical accessory from the fifties. Made in France
Suitable for Peugeot 404 Coupe.
Renault 8 + Renault Saviem.
tail lamp is not supplyable any more.
1965. For engine: XC5A, XC5P, XC6, KF1, KF2, CKF (3 + 5 crankshaft bearings). Engine capacity: 1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,20mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
crankshaft bearings). Engine: XC5, XC5P (second mounting). Engine capacity: 1618ccm. Compression: 7,6: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,00mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
1618cc. Bore: 84mm. Piston pin: 23 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.
of year of construction 1967 to 09/1968. For brake calipers with 3 pistons! Height over everything: 28mm. Height to collar: 26mm.
Outer diameter: 83.5mm, inner diameter: 60.1mm, thickness: 8.7mm. Or. No. 5035.04.
Inside diameter both sides: 8-10mm. Or. No. 1302.09
Inside diameter both sides: 15,0mm. Or. No. 1302.18
end about 90° bent (1x upward, 1x downwards). Inside diameter: about 15mm.
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
