for Peugeot Alle

You compare Seal under carburetor Peugeot 304 S.

P 304, centering wedge for the tail gate. Suitable for Peugeot 304 Coupe. Or. No. 8735.07

Original Peugeot, no reproduction.

P 304, liner (4 pieces). Suitable for Peugeot 304 (75HP). Engine: XL3S. Compression: 8,8: 1. Engine

capacity: 1288cc. Bore: 76,0mm. Outside diameter: 89.000 mm. Length over everything: 128,30mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 304/104/205/Visa, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot 304 starting from 1972, Peugeot 104, Peugeot 205, Citroen Visa.

P 304/305, drive shaft, fits on the left of or on the right. Peugeot 304. Overall length: 760mm

External toothing: 23 teeth both sides. Plus 75 Euro Old part deposit.

P 304/305, Rubber bush for the front anti-roll bar. For anti-roll bar diameter: 26mm. Used from

1978 onwards. The shape of the opening is 8 square! Diameter measured in the flanks = 24mm. Diameter measured in the corner = 26mm. Or. No. 5094.24

P 304/305, clutch cable. Length: 930mm. Suitable for Peugeot 304 + 305, to year of construction

06/1982. Or. No. 2150.45

P 304/305, generator with internal alternator regulator, for Peugeot 304, 305. Suitable for

engines: XL5, XL5S, XL5GL, XK5 to year of construction 1979. Engine XL4D to series of 4.111.421 = year of construction 1980. Paris Rhone A12R13, 12 V, 35A. Assembly position 120°. Old part deposit 150 euros. Or. No. 5705.35 + 5705.94

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  Control lamp red for Citroen 2CV, HY, DS, with chrome border, reproduction of
  18,74 €

P 304/305, clutch disk. Suitable for Peugeot 304 Diesel (1,4+1,5D), starting from year of

construction 1976. Peugeot 305 Diesel (1,5+1,6D). Dimension: 200 x 137 x 3,2mm. 28 teeth.

P 304/305/504/505, repair set for the steering gear (28mm gear rack). Suitable for Peugeot 304

starting from year of construction 1977. Peugeot 504, 505, 604.

brake hose Peugeot 504 front 09/75-10/82, P 304, P305,P404,P604, length 401mm, connections male

thread M10 + female thread 1x M10. Made in Europe.

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

clip for brake hoses, Peugeot 304, 404, 504

P 304/504/505/604, thrust piece (diameter 28mm) gear rack. Suitable for Peugeot 204, 304 (new

mounting). Peugeot 504, 505, 604. Or. No. 4062.10

P 304/504/505/604, bonded-rubber bushing for the anti roll bar. Diameter: 30mm. Length: 30mm

Inside diameter: 12mm. Or. No. 508709

P 304/Citroen, steering gear bellow. Suitable for Peugeot 304, starting from year of construction

07/1978. Citroen VISA + C15. Or. No. 4066.20

P 304C, exhaust pipe in front. Suitable for Peugeot 304 Cabrio + 304 Coupe. Installed from year of

construction 1969 to 1972.

• Suitable for this article
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 304C, silencer rear (consisting of 2 silencers), only suitable for Peugeot 304 Cabrio + Coupe, of

year of construction 1969 to 09/1972. Or. No. 1724.41

• Suitable for this article
• 
  Screw M7x30, galvanized
  0,55 €
• 
  M7, washer largely, 7,5x22mm, 2mm heavily.
  0,35 €
• 
  Nut M7, galvanized
  0,18 €
• 
  Toothed washer M7 galvanized
  0,25 €
• 
  Suspending rubber exhaust. Suitable for Peugeot 204, 304, 404, 504, 505, 604
  4,71 €
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 304C, foam material (backrest) for 1 seat in front. Suitable for Peugeot 304 Cabrio + 304 Coupe.

P 304C, foam material (seat face) for 1 seat in front. Suitable for Peugeot 304 Cabrio + 304 Coupe.

P 304C, bonded-rubber bushing ouple rod at the front axle. Suitable for Peugeot 304 Cabriolet +

Coupe. Dimension: 12x30x30x24mm. Or. No. 5087.06

• Suitable for this article
• 
  Rubber mounting for the couple rod. Suitable for Peugeot 304, 504, 505, 604
  4,15 €

P 304C, coverings (2x seat in front). Color: Vinyl brown. Suitable for Peugeot 304 Cabrio.

P 304C, coverings (2x seat in front). Color: Vinyl black. Suitable for Peugeot 304 Cabrio.

P 304C, coverings set (2x seat in front, 1x seat bench rear). Color: Vinyl brown. Suitable for

Peugeot 304 Coupe.

P 304C, coverings set (2x seat in front, 1x seat bench rear). Color: Vinyl black. Suitable for

Peugeot 304 Coupe.

P 305, exhaust rear silencer. Suitable for Peugeot 305 I + II (all engines). Or. No. 1724.98 +

1726.43

P 305, gas-filled spring rear flap Peugeot 305. Or.Nr.873149.

P 305, hand brake cable Peugeot 305 I. all models. Fits on the left + on the right. 1588mm

lengthens. Sleeve 890mm. Or. No. 4834.71

P 305, heater radiator. Suitable for Peugeot 305. Or. No. 6448.39.

P 305, radiator hose above Peugeot 305. Suitable for all petrols. Or. No. 1343.46

• Suitable for this article
• 
  Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band
  4,56 €
• 
  Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band
  4,71 €

P 305, clutch cable. Suitable for Peugeot 305, starting from year of construction 1982. Or. No

2150.61

P305, steering box switch for wiper. 2 Version. Or.No.623904

Starter lock Peugeot 305. All models. Diameter 34mm. Original manufacturer Neiman. No reproduction

Or. No. Neiman: 012910

brake hose Peugeot 404, P305 front left 72-80, length 351mm, connection 1x M10 outside + 1x M10

inside. Made in Europe.

P 402, cylinder head gasket for Peugeot 402 /12CV. Original Exelsior. New Old stock.

P 403, seal foam rubber, in front at the front left fender. Suitable for Peugeot 403. Original one

no reproduction (NOS). Or. No. 7843.09

P 403, starter switch for Ducellier + Paris-Rhone starter motor. With the help of this original

switch (rarity), a starter operated with a cable can be converted to an electric starter switch. The original instructions can be found in the workshop manual 403 (the cable is replaced by an electric cable). Original Peugeot (NOS). Or. No. 5868.30

P 403, exhaust from high-grade steel. Suitable for Peugeot 403 Berline. Without mounting material!

P 403, exhaust pipe (elbow pipe) in front. Suitable for Peugeot 403 sedan + BREAK. Only suitable

for petrol engines. Installed from year of construction 1955 to 1966. Or. No. 170129

P 403, exhaust pipe (elbow pipe) in front. Suitable for Peugeot 403 Pick UP. Diesel engine

Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 38mm (clamp clip). Thread: M8
  2,53 €

P 403, exhaust pipe center (between the silencers). Suitable for Peugeot 403 Pick UP. Fuel engine

Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust clip 38mm (clamp clip). Thread: M8
  2,53 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €

P 403, exhaust pipe center, between the two silencers. Suitable for Peugeot 403 sedan. Installed

from year of construction 1955 to 1966. Or. No. 172201

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €

P 403, exhaust pipe center, between the silencers. Suitable for Peugeot 403 BREAK (Commerciale +

Familiale). Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €
• 
  Exhaust clamp clip (U-clamp) for 40mm pipe (elbow pipe into the silencer)
  2,83 €

P 403, cable heater adjustment, Peugeot 403 (2 serie). Or. No. 6473.05

P 403, front indicator socket Peugeot 403. Suitable for all models. Corresponds to Or. No. 6307.04

6307.12 + 6307.14 + 6307.13

• Suitable for this article
• 
  P 403, seal under the front indicator. Suitable for Peugeot 403. Or. No. 6304.03
  8,38 €

Turn signal cap with edge of chrome clearly, Peugeot 403, diameter 11,5cm

Turn signal cap with edge of chrome orange Peugeot 403, diameter 11,5cm

P 403, turn signal cap in front, without chrome trim. Color: clearly. Suitable for Peugeot 403.

P 403, seal (2 item) outside at the triangle window, seal to the windshield frame. Suitable for

Peugeot 403 Cabriolet. Or. No. 9022.06

P 403, seal from cork, at the cylinder head. Suitable for Peugeot 403 Diesel + Citroen HY. Engine

TMD + XDP85. Or. No. 0147.04

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

P 403, Gasket for the intermediate plate under the timing cover . Suitable for Peugeot 403. Or. No

0321.06