for Peugeot Alle

P 404 U8-U10, exhaust pipe in front, before the silencer. Suitable for Peugeot 404 U8 + U10

Installed starting from year of construction 1967. (Fuel engine XC7). Or. No. 1701.58 + 1701.36

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 42,5mm. Length: 130mm
  7,74 €
• 
  Exhaust clip 45mm. Peugeot, Renault. Citroen.
  2,29 €

P 404 U8-U10, silencer rear. Suitable for Citroen Peugeot 404, engine XC7. Installed starting from

year of construction 1967.

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €

P 404 XC5, exhaust pipe in front (2 pieces), before the silencer. Suitable for Peugeot 404 (sedan +

Coupe + Cabrio) with XC5 engine (carburetor + injection engines). Or. No. 1701.36.

P 404, hub nut in front (front axle). Thread: M18 x 1,5. Or. No. 693540

P 404, intake pipe seal (of paper). Suitable for Peugeot 404, with carburetor engine (apart from

U65). Or. No. 0348.06

P 404, stainless steel exhaust system. Suitable for Peugeot 404 Sedan, last version. Engine: XC6

manual gearbox. Without mounting material!

P 404, exhaust pipe in front (elbow pipe double). Suitable for Peugeot 404 Cabrio, Coupe, sedan

Engine XC6, carburetor and injection engine. Or. No. 170161

P 404, front exhaust collector, mounted on the exhaust manifold (resonator). Suitable for Peugeot

404, up to 1964 (saloon, convertible + coupé). Or. No. 1720.04

P 404, battery tray (battery holder). Suitable for Peugeot 404. Or. No. 5603.11

P 404, fuel filler hose (mounts on the fuel tank). Suitable for Peugeot 404. Or. No. 1504.09

• Suitable for this article
• 
  Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band
  4,91 €
• 
  Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band
  5,86 €

indicator cap (side light) P404 front white-orange, silver frame

indicator cap (side light), white-orage Peugeot 404 chromed frame. Still usable reproduction from

South america. with test symbol!

P 404, turn signal cap rear. Suitable for Peugeot 404 Cabriolet + 404 Coupe. Version: Carello.

• Suitable for this article
• 
  P 404, taillight cap red. Suitable for Peugeot 404 Cabriolet + 404 Coupe
  48,49 €

indicator lamp orange front complete Peugeot 404 with support, frame chromed original, or.no. 630237

P 404, front left floor panel, Peugeot 404. Time intensive manual reproduction. Very similar in

appearance, almost like the original sheets.

P 404, front left floor panel, Peugeot 404. Simple reproduction. Suitable for saloon, estate

pick-up, coupé, convertible (with some adjustments).

P 404, front right floor panel, Peugeot 404. Time intensive manual reproduction. Very similar in

appearance, almost like the original sheets.

P 404, front right floor panel, Peugeot 404. Simple reproduction. Suitable for saloon, estate

pick-up, coupé, convertible (with some adjustments).

floor panel Peugeot 404, fits left or right side. Made in Europe.

shock absorber rear P404 Break 1960 till 03/1964, two pieces!

P 404, brake shoes for Peugeot 404 without brake assist (without brake booster). Brake drum

diameter: 255 mm. Brake lining width: 60 mm. Suitable for Peugeot 404 saloon, convertible + coupé. Or. No. 4235.34 + 4235.26 + 4235.97 + 4238.55

P 404, rear brake shoes for Peugeot 404 with or without brake booster (brake servo). Brake drum

diameter: 255 mm. Brake lining width: 45 mm. Suitable for Peugeot 404 saloon, convertible and coupé.

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1965 to 1967. Or. No. 4308.13. Consisting of: 4x spring 437515. 2x spring 437517. 2x spring 437518.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  31,63 €

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1967 to 1968. Or. No. 4308.03. Consisting of: 4x spring 437521. 4x spring 437522. Length long spring (without hooks): 23,30mm. Short spring lengthens (without hooks): 10,0mm.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  31,63 €

P 404, front brake shoes. Suitable for Peugeot 404 saloon, convertible and coupé with Hydrovac

brake booster. Brake drum diameter: 280 mm. Brake lining width: 65 mm. Brake shoe dimensions: 300 x 65 x 7 mm. Or. No. 4238.58 + 4235.92 + 4235.93 + 4235.50

P 404, brake shoe set in front. Suitable for Peugeot 404 to year of construction 07/1970. System

Bendix, drum diameter 280mm, lining-wide 67mm

P 404, brake power controller. Suitable for Peugeot 404 (petrol) from year of construction 1967

until end of production. Connecting thread: 3/8 x 24UNF. Or. No. 4861.07

Brake light switch for Peugeot 404 as from Pedalerie.

P 404, brake disk in front (1 piece). System Bendix. Suitable for Peugeot 404, starting from year

of construction 10/1968. Diameter: 285mm. Heavy one: 10mm. Interior hole diameter: 80mm. 3 hole securement. Or. No. 4246.46

brake hose rear Peugeot 404U, length 270mm, both side threat 3/8-24h Made in Spain.

brake hose Peugeot 404 rear, length 399mm, 3/8x24+5/8x18, 3/8x24 + 5/8x18. Made in Spain.

brake hose Peugeot 404. rear 72-80, length 205mm, C15, Peugeot 305. connection male thread 2x M10

10

P 404, brake hose in front, suitable for Peuegot 404 with brake assistance to year of construction

1966. Length: 354mm. Thread: 3/8 x of 24 male threads, 3/8 x of 24 female threads + 5/8 x of 18 male threads. Suitable for vehicles with 4,5mm brake hose. Made in Spain. Note : 404 without Hydrovac all had 7/16" until about 1966. The new lines with 3/8" thread appeared with the Hydrovac.

P 404, brake hose in front, suitable for Peugeot 404 to year of construction 1966. Length: 354mm

Thread: 7/16x20 + 5/8x18 + 7/16x20. Suitable for vehicles with 6,35mm brake hose. Or. No. 480607. Made in Spain.

P 404, chassis beam front left with reinforcement spar. This chassis beam consists of the outer

plate and inner reinforcing spar. Or. No. 7212.08

P 404, front left chassis member. This chassis member is only the outer panel, without inner

reinforcement.

P 404, chassis beam front right with reinforcement spar. This chassis beam consists of the outer

plate and inner reinforcing spar. Or. No. 7213.02

P 404, front right chassis member. This chassis member is only the outer panel, without inner

reinforcement.

P 404, seal above, for the tail lamp. Suitable for Peugeot 404 sedan + Cabriolet (Coupe). Or. No

6344.15

P 404, seal headlamp casing in the fender! For Peugeot 404. Made in Germany.

P 404, seal down, for the tail lamp. Suitable for Peugeot 404 sedan + Cabriolet (Coupe). Or. No

6344.16

P 404, seal under the parking light - indicator. Suitable for Peugeot 404 sedan + cabriolet, to

year of construction 1964 (salon 1965). Or. No. 6304.06

P 404, throttle valve adjustment for Kugelfischer injection. Suitable for Peugeot sedan 404 to

series 8231077. 404 Cabrio + Coupe to 4599971. Or. No. 1653.19

P 404, thrust piece gear rack. Suitable for Peugeot 404. Or. No. 4062.02

P 404, intake manifold seal. Suitable for Peugeot 404 Injection. Or. No. 0348.13

P 404, spring plate in front. Diameter: 145mm. Suitable for Peugeot 404. Per piece

Window lifter door in front on the left, Peugeot 404

Window lifter door in front on the right, Peugeot 404

P 404, set of floor mats (4 pieces). Velour Exellence beige with beige vinyl border trim (front +

rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 404, set of floor mats (4 pieces). Velour Exellence dark blue (Bleu marine) with light grey (Gris

clair) vinyl border trim (front + rear). Suitable for Peugeot 404 saloon. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.