for Peugeot Alle
3055 Articles | Page 54 of 62
Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The washer nozzle is
screwed with a nut from behind. 2x water jet. Flat design.. Mounting diameter: 8,0mm.
Wiper system nozzle chromium-plates (twin-jet nozzle). Suitable for all Citroen 2CV starting from
year of construction 1961. Also suitable for many classical Peugeot (403). Bore for the nozzle must be 8-9mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Washer pump, for mounting outside of the water reservoir! 12 V. Suitable for Citroen DS, Peugeot
t 104, 304, 504, 505, 604. Or. No. 643422
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Headlamp mounting bolt (stud bolt with ball). Dimension: 5 x 36mm. Thread: M5. Universal suitable
for many French vehicles.
Headlight reflector (without glass). Headlight system "Cibie 180mm". The reflector has an outer
diameter of 190mm, but is suitable for a lens with 180mm diameter. Quality reproduction. The original headlight can be repaired with this. Simply remove the glass cleanly (the old reflector may be damaged for this) and glue it onto the new reflector. Suitable for Renault: Floride, Caravelle, Fregate, R8 Gordine. Peugeot 203, 403, 505, Citroen DS up to 1967.
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Blank key for door lock. Suitable for Peugeot 504 BREAK, of year of construction 1968 to 1974. For
lock manufacturers: RONIS. Please observe the cross section of the key bit. Shaft length: 17,5mm. Shaft wide: 7,1mm.
Blank key for starter lock + door lock. Suitable for Peugeot 104, from 1982 to 1988. 305 starting
from 1978. 505 starting from 1981. 604 from 1981 to 1985. Citroen AXEL starting from 1984. LNA starting from 1984. Visa from 1982 to 1984. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 24,0mm. Shaft wide: 7,5mm.
Blank key for starter lock + door lock. Suitable for Peugeot 104. 204 starting from 1965. 304
starting from 1969. 305 from 1978 to 1980. 404 starting from 1965. 504 from 1968 to 1984. 505 of year of construction 1984. 604 from 1981 to 1984. Talbot Samba. Citroen LN. For lock manufacturers: VACHETTE + SIMPLEX. Please observe the cross section of the key bit. Shaft length: 17,5mm. Shaft wide: 7,1mm.
Blank key for starter lock + door lock. Suitable for Peugeot 104. 204 starting from 1965. 304
starting from 1969. 404 starting from 1965. 504 from 1975 to 1983. 604 from 1975 to 1980. 104 starting from 1972. Renault R4, starting from year of construction 1961 to 1981. Citroen LN + VISA. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 22,4mm. Shaft wide: 7,0mm.
Blank key for starter lock + door lock. Suitable for Peugeot 504 GRD, of year of construction 1975
to 1983. Peugeot J7 from 1965 to 1980. J9, starting from 1981. For lock manufacturers: NEIMAN + CLAUSOR. Please observe the cross section of the key bit. Shaft length: 22,4mm. Shaft wide: 6,9mm.
Blank key for starter lock + door lock. Suitable for Peugeot J5 + Citroen C25, of year of
construction 1981 to 1993. For lock manufacturers: GIOBERT. Please observe the cross section of the key bit. Shaft length: 23,3mm. Shaft wide: 7,4mm.
Blank key for starter lock + door lock. Suitable for Renault R16, of year of construction 1965 to
1980. Talbot 1000, 1005, 1006, 1007, 1100, 1301, 1501, to year of construction 1973. Bagheera starting from 1973. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 23,15mm. Shaft wide: 7,0mm.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
3055 Articles | Page 54 of 62
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
