for Peugeot Alle

Simca, 1000, wheel brake cylinder in front on the right. Suitable for Simca 1000, starting from

year of construction 09/1961. Piston diameter: 22 mm. Mounting board bore: 36mm. Brake line connector: 9 mm. Length over everything: 68 mm. Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

shock absorber rear Simca 1000 from 09/62 till 07/73 incl. Rally I, two pieces!

shock absorber front Simca 1000, all models. two pieces!

indicator cap front left Simca 1000LS +1100GLS

indicator cap front right Simca 1000LS + 1100GLt

Simca, brake shoes mounting set. Suitable for Simca - Talbot 1100, 150, 1307, 1308, 1309, 1508

1509, 1510, 1609, 1610, alpine one, Horizon, Rancho, Solara. For brake system Lucas/Girling. 228.6 x 42mm.

Simca, brake pads in front Simca, various models. System Bendix, height of 40,5mm, wide one 95mm

10,2mm heavy. Corners down tapered!

Brake caliper repair kit Bendix (34mm rear), for Simca 1000 1,3 Rally 2, Fiat X1/9, Fiat 124, Fiat

124 Coupe, Fiat 124 Spider, Pininfarina Eurospider.

Back window seal Simca 1307. The seal is mounted with sealing trim! Original supplier, Made in

n France!

Piston ring set for 1 piston, Simca 1000, 1100, Rally 2+3, Matra Bagheera, 1307, 1308, 1508

Solara, Horizon, Rancho. Bore 76,70mm. Piston rings 1,75mm + 2,00mm + 4,00mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Simca, engine gasket set completely. Suitable for Simca 1000 rally 2 + rally 3.

Simca, engine gasket set completely. Suitable for Simca Versailles V8 Aquillon 2388cc.

Simca, oil filter, suitable for Simca V8, CHAMBORD, ARIANE 8, VERSAILLES, TRIANON, REGENCE

BEAULIEU, MARLY, PRESIDENCE, VEDETTE

Simca, wheel bearing front + rear. Suitable for Simca 1000 + 1200, from 1963 to 1976.

Simca, wheel bearing set for the rear axle. Suitable for Simca 1000 from year of construction 1961

to 1978. Simca 1200 S, from year of construction 1968 to 1971. Contents: 2x identically constructed bearings. Outside diameter: 50,3mm. Inside diameter: 27,0mm. Overall height: 14,8mm.

Simca, lockcylinder for the door right (door lock), with 2 keys. Suitable for Simca 1307/1308

Original manufacturer Neiman. No reproduction.

Simca, lockcylinder for the door right (door lock), with 2 keys. Suitable for Simca 1307/1308

Original manufacturer Neiman. No reproduction.

Carburetor repair set for Simca 1000 rally 3. For carburetor Weber 2x40 DCOE.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Starter lock Simca (German version), suitable for Simca 1000, 1100, 1200S, 1301, 1501, Matra

Bagheera. Original manufacturer Neiman. No reproduction. Neiman No. 014711

Starter lock Simca, suitable for Simca 1000, 1100, 1200S, 1301, 1501, Matra Bagheera. Original

manufacturer Neiman. No reproduction. Neiman No. 014410

Starter lock Simca, suitable for Simca 1300, 1301, 1500, 1501. Original manufacturer Neiman. No

reproduction. Neiman No. 014510

Starter lock Simca, suitable for Simca 1307 + 1308. Original manufacturer Neiman. No reproduction

Neiman No. 014700

indicator cap front left Simca 1000

indicator cap front right Simca 1000

tail light cap left Simca 1000

tail light cap right Simca 1000

tail light cap left Simca 1100LS

tail light cap right Simca 1100LS

tail light cap left Simca 1307-1507 with chrome frame (Frankani)

tail light cap right Simca 1307-1507 with chrome fram (Frankani)

Simca/Panhard, wheel brake cylinder in front, 31.75mm piston diameter, Simca Vedette (type abeille)

before year of construction 1953, Panhard Dyna (4+5CV) before year of construction 06/1958. Mounting board bore = 36 mm, Brake line connector = 11 mm, length over everything = 68 mm. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

Shaft seal (40 x 58 x 10) differential both sides. Suitable for Peugeot 204, 304, 305, 504, J7

Talbot Horizon, Samba, Solara. Inside diameter: 40.00mm. Outside diameter: 58.00mm. Heavy one: 10.00mm. Or. No. 3121.09. Made in Germany.

Shaft seal differential. Dimension: 28 x 45 x 8mm. Suitable for Renault 4 (first version)

Differential Peugeot 504, 505, 604. Made in Germany.

• Suitable for this article
• 
  R4/R5, O-ring for the drive shaft flange at the gearbox. Suitable for Renault
  3,37 €

Shaft seal for the camshaft. Dimension: 35 x 50 x 8. Suitable for Peugeot Diesel engines: XUD7

XUD9, XUD11 to year of construction 01/1994. Or. No. 0236.14

Shaft seal crankshaft (front side). Suitable for Peugeot 204 D, 304D (1,4L), 404D, 504D, J7D, J9D

Talbot express Diesel. Dimension: 42 x 60 x 8mm. Or. No. 0514.11

Oil seal ring crankshaft rear, 78x100x10mm, for Visa, LNA, C15, Peugeot 104, BX engine 109-5E +

129-5 Peugeot 205 Renault 14 Talbot Samba

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Suitable for R4 (955, 956, 1108cc), R5

Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15. Peugeot 504 V6, 604 V6, Citroen XM V6. Made in Germany.

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Improved version from silicone. Suitable

for Renault R4 (955, 956, 1108cc). R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15.Peugeot 504 V6, 604 V6, Citroen XM V6.

Shaft seal crankshaft rear. Suitable for nearly all Renault engines. Also for V6 engines by Peugeot

504, 604. Renault R30, Alpine A310. Dimension: 80x100x8mm. Or. No. 7700859692

Shaft seal crankshaft in front. Suitable for V6 Euroengine (PRV). Peugeot 504 V6. Peugeot 604 V6

6. Renault Alpine A310 V6, R30 V6. Dimension: 42 x 62 x 10mm.

Shaft seal camshaft. Dimension: 16 x 21 x 4,5. Suitable for Peugeot J5 petrol. Citroen C25 petrol

Peugeot 504 2.0 petrol. Peugeot 504 Diesel (1.9 + 2.3). Peugeot 505 petrol + Diesel. Peugeot J7 Diesel.

Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun 21155.

• Suitable for this article
• 
  Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to
  79,23 €

Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and

surface rust without harming the support material. It don`t cause any damage of rubber , glas or plastic, so a complicated covering is not neccessary. In opposite to sandblast, Soda protects the cleaned material against rust at once. Enviroment friendly and gently removal from different coatings on boats, wooden furniture, glas and window frames is possible. This blast gun is not suitable for sandblast usage. Operating pressure is 87-174 lbs. Minimum air consumption is 180 liter/minute at 120 lbs.

• Suitable for this article
• 
  Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun
  49,48 €

Festoon bulb 10W, 12 Volt. 11x43mm. Base SV8.5

Festoon bulb 18W, 12 Volt. 2CV for side indicator C-pillar. 15x43mm. Base SV8.5

Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik Up.....

Festoon bulb 5W, 12 Volt. 11x43mm. Base SV8.5

Sofitte 6 V, 10 Watts. 11x38mm, base SV8,5. e.g. back lights Citroen 11CV.

Festoon bulb, 6 volt, 10W, measure: 11x43mm, SV8,5

Festoon bulb 6 volt 18 W. 15x44mm. Base SV8.5