2CV old, rear muffler exhaust fixture. Suitable for Citroen 2CV with on the right mounted exhaust
Or.Nr.AZ18263. Made in Germany.
floor panels for Renault 2CV4
45 Articles
2CV, sheet metal behind the seat bench box, between the wheel housings. Suitable for Citroen 2CV
all years of construction. Very good reproduction, better than original! Made in Europe.
2CV, Cross-beam under floor pan rear crosswise (long cross-beam), suitable for Citroen 2CV4 + 2CV6
The cross-beam fits on the left + on the right. 360mm lengthens. Made in Europe.
2CV, Cross-beam under floor pan in longitudinal direction, suitable for Citroen 2CV4 + 2CV6. The
cross-beam joins the two cross bars of the floor pan. On the left + on the right fitting. Made in Europe.
2CV, cross-beam under floor pan in front crosswise (short cross-beam), suitable for Citroen 2CV4 +
2CV6. The cross-beam fits on the left + on the right. 325mm lengthens. Made in Europe.
2CV, floor pan on the left. For Citroen 2CV to year of construction 1970. The seats are adjusted by
holes in the floor pan! Very good reproduction (electrolytically galvanizes). Optically and technically the Orignal accordingly. The floor pan are supplied with all flanges, reinforcement and threads. The floor pan goes from the pedal base to the seat bench box.
2CV, floor pan on the left. For Citroen 2CV after year of construction 1970 to production end
(Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.
2CV, floor pan on the left. Reinforce version (1,1mm sheet metal instead of 0.7mm). For Citroen 2CV
after year of construction 1963 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.
2CV, floor pan on the right. For Citroen 2CV to year of construction 1970. The seats are adjusted
by holes in the floor pan! Very good reproduction (electrolytically galvanizes). Optically and technically the Orignal accordingly. The floor pan are supplied with all flanges, reinforcement and threads. The floor pan goes from the pedal base to the seat bench box.
2CV, floor pan on the right. For Citroen 2CV after year of construction 1963 to production end
(Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.
2CV, floor pan on the right. Reinforce version (1,1mm sheet metal instead of 0.7mm). For Citroen
2CV after year of construction 1963 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.
2CV, Floor pan, reinforcement bracket at the transition from the pedal base floor plate to the
floor pan. Suitable for Citroen 2CV. Made in Germany.
Floor pan - box sill, mounting bracket for the seat belt attachment. Suitable for Citroen 2CV. 1
set on the left + on the right. Made in Germany.
2CV, brass bushings in pedal floor for standing brake pedal + clutch pedal (guide for the pedals in
the floor panel). Suitable for Citroen 2CV, AZU up to approx. year of construction 1970.
2CV old, pedal floor plate doubles (with brass bushes). Strengthened version. For all Citroen 2CV
with standing brake + clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). The pedal floor plate has like original 2 brass bushes in front, for the clutch and the brake. Made in Europe.
2CV, pedal floor pan double. Strengthened version. For all Citroen 2CV with hanging brake + clutch
pedal (installed from about 1977 to 1990). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate doubles. Strenghened version. For all Citroen 2CV with standing foot
throttle and hanging brake pedal + clutch pedal. (Installed about 1970 to 1977.) The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV old, pedal floor plate doubles. Strengthened version. For all Citroen 2CV with standing brake +
clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate inside, with all flanges (Repair sheet metal). Very good reproduction, for
Citroen 2CV with hanging pedals. Made in Europe.
- Suitable for this article
2CV, Seat bench box complete for Citroen 2CV. This is a very good reproduction and in view of the
quality better than the original seat bench box. Additionally, it is electrolytically galvanized. Made in Europe.
Seat bench box on the left, sheet metal for the transition from the wheel housing to the box sill
The sheet metal is at the bottom surface of the seat bench box. Made in Germany.
Seat bench box on the right, sheet metal for the transition from the wheel housing to the box sill
The sheet metal is at the bottom surface of the seat bench box. Made in Germany.
Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fixed
between box sills and the sheet metal 15180. Made in Germany.
Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fixed
between box sills and the sheet metal 15181. Made in Germany.
2CV, seat bench box, sheet metal centrically, for the bottom surface of the seat bench box
Suitable for Citroen 2CV. On the left + on the right of this sheet metal, connect the sheet metals 15180 + 15181. Made in Germany.
2CV, seat bench box, sheet metal bottom surface, centrically, like original with all flanges and
indentations. On the left + right connect sheet metals 15180 + 15181. Made in Europe.
Seat box corner at the rear left. Suitable for Citroen 2CV. That is the diagonal corner plate which
you can see, if one opens the rear door. Made in Germany.
Seat box corner at the rear right. Suitable for Citroen 2CV. That is the diagonal corner plate
which you can see, if one opens the rear door. Made in Germany.
2CV, floorpan plate centrically for the original chassis of Citroen 2CV, Dyane. (semicircular
recess). Made in Europe.
2CV, Reinforcement cross-beam under the seat bench, for Citroen 2CV. This cross-beam is welded
crosswise and the transition to the sheet metal between the wheel housings and the luggage compartment. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is
locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is
locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under
the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK
2CV6, exhaust fixture rear, galvanizes! That is the lower, rear handle, which is locked under the
floor pan. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust fixture 2CV6, in front, from high-grade steel! The handle is locked under the floor
pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan
Suitable for Citroen 2CV6 + 2CV4.
AZAM, floor pan on the left, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has
the high curvature for the large suspension pot of the Ami6. Made in Europe.
AZAM, floor pan on the right, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has
the high curvature for the large suspension pot of the Ami6. Made in Europe.
45 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
