Renault / 2CV4 / rear body components

2CV old, wheel housing at the rear left, rear axle stop buffer repair sheet metal with screwed rubber buffer. Suitable for Citroen 2CV from the sixties. Suitable rubber buffer = 12307 + 12306

Quality: 4

• Suitable for this article
• Rubber stop buffer for the radius arm rear. Suitable for Citroen 2CV, to year of construction 1
  19,83 €

2CV old, wheel housing at the rear left, rear axle stop buffer repair sheet metal with large set up rubber buffer. Installed in Citroen 2CV of the first series. (fifties). Suitable rubber buffer = 12177

Quality: 4

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in the wheel housing. Conically. Suitable for Citro
  11,81 €

2CV old, wheel housing at the rear right, rear axle stop buffer repair sheet metal with screwed rubber buffer. Suitable for Citroen 2CV from the sixties. Suitable rubber buffer = 12307 + 12306

Quality: 4

• Suitable for this article
• Rubber stop buffer for the radius arm rear. Suitable for Citroen 2CV, to year of construction 1
  19,83 €

2CV old, wheel housing at the rear right, rear axle stop buffer repair sheet metal with large set up rubber buffer. Installed in Citroen 2CV of the first series. (fifties). Suitable rubber buffer = 12177

Quality: 4

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in the wheel housing. Conically. Suitable for Citro
  11,81 €

2CV, Sheet metal behind the seat bench box, transition to the wheel housings. Suitable for Citroen 2CV.

Quality: 4

2CV, sheet metal behind the seat bench box, between the wheel housings. Suitable for Citroen 2CV, all years of construction. Very good reproduction, better than original! Made in Europe.

Quality: 3

2CV, Chassis guide under the luggage compartment sheet metal, suitable for Citroen 2CV. This welded sheet metal takes up the chassis end points. Made in Europe.

Quality: 3

2CV, Lug at the rear left in the luggage compartment, for Citroen 2CV. This bracket is welded and takes up the trunk lid installing rod and the roll roof securement. Made in Europe.

Quality: 3

2CV, Lug rear on the right in the luggage compartment, for Citroen 2CV. This bracket is welded and takes up the roll roof securement. Made in Europe.

Quality: 3

2CV, rear end panel for Citroen 2CV (original). The rear end panel is the final version, Installed until 1990. Original Citroen (MCC), no reproduction!

Quality: 2

2CV, Rear end panel for Citroen 2CV. Optically like original. The rear end panel is amplified and galvanized. It is the final version, installed until 1990. Electrolytically galvanized. Made in Europe.

Quality: 3

2CV, Rear end panel repair sheet metal for Citroen 2CV. It is only the outer skin of the rear end panel, with the cutouts for the tail lamps. Made in Europe.

Quality: 4

2CV, Luggage compartment sheet metal with all flanges and reinforcement (luggage compartment tub). Inclusive wall + connection sheet metal. Suitable for Citroen 2CV all years of construction. Very good reproduction, like original. Electrolytically galvanized. Made in Europe.

Quality: 3

• Suitable for this article
• 2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal t
  14,86 €
• 2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal t
  14,86 €
• 2CV, trunk floor, rubber plug. The rubber plug was mounted also in Rear end panel of Citroen DS
  2,96 €

Boot floor under spare wheel, solo. Simple reproduction. For Citroen 2CV, all years of construction. Take better our own 15459 reproduction!

Quality: 4

• Suitable for this article
• 2CV, Chassis guide under the luggage compartment sheet metal, suitable for Citroen 2CV. This we
  6,87 €
• 2CV, Luggage compartment sheet metal solo for Citroen 2CV. It is a very good reproduction, with
  69,32 €

2CV, Luggage compartment wall sheet metal with upper connection sheet metal. (without luggage compartment sheet metal under spare wheel). Suitable for Citroen 2CV all years of construction. Good reproduction. Electrolytically galvanizes.

Quality: 3

• Suitable for this article
• 2CV, Luggage compartment sheet metal solo for Citroen 2CV. It is a very good reproduction, with
  69,32 €

2CV, trunk floor, rubber plug. The rubber plug was mounted also in Rear end panel of Citroen DS. Cross profile. Diameter 32-33mm. (suitable by DS for item 37227 + 35146)

Quality: 3

2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal to the rear end panel. Suitable for Citroen 2CV. Made in Europe.

Quality: 3

• Suitable for this article
• 2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal t
  14,86 €

2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal to the rear end panel. Suitable for Citroen 2CV. Made in Europe.

Quality: 3

• Suitable for this article
• 2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal t
  14,86 €

Wheel housing at the rear left completely. (Interior fenders). Suitable for Citroen 2CV6. Good reproduction. Inclusive Handle for rubber stop and reinforcement for seat belt attachment. Made in European Union. Final version, as original! Electrolytically galvanized.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €
• Seat bench fixture sheet metal (2 pieces). Suitable for Citroen 2CV. The sheet metals are yello
  44,53 €

2CV, Wheel housing at the rear left, seat belt attachment sheet metal. Suitable for Citroen 2CV. The sheet metal is double with thread for the belt connector. Often this sheet metal is rusted away. If you would like to re-tool an older 2CV with rear belts, this sheet metal must be re-tooled! Made in Europe.

Quality: 3

Wheel housing at the rear left, handles for the exhaust rubber rear in the wheel housing, for Citroen 2CV. This handle is welded in the left wheel housing and is missing by new interior fenders. Made in Europe.

Quality: 3

Wheel housing at the rear left, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV, final version, Installed until year of construction 1990. Reproduction such as original. The rubber buffer is held by a sheet metal ring. The sheet metals are electrolytically galvanized. Suitable rubber buffer = 12046! Made in Europe.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €

Wheel housing at the rear left, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV, final version, Installed until year of construction 1990. Suitable rubber buffer = 12046 (a hole must be drilled in the rubber for the stud bolt)! With this version, the rubber buffer is only untwisted.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €

Wheel housing at the rear left, reinforcing plate for seat belt attachment rear. If a new wheel housing 15159 is on the left welded, this reinforcing plate is missing! Suitable for all Citroen 2CV, with lap belt rear. Made in Europe.

Quality: 3

Wheel housing at the rear right completely. (Interior fenders). Suitable for Citroen 2CV6. Good reproduction. Inclusive Handle for rubber stop and reinforcement for seat belt attachment. Made in European Union. Final version, as original! Electrolytically galvanized.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €
• Seat bench fixture sheet metal (2 pieces). Suitable for Citroen 2CV. The sheet metals are yello
  44,53 €

2CV, Wheel housing at the rear right, seat belt attachment sheet metal. Suitable for Citroen 2CV. The sheet metal is double with thread for the belt connector. Often this sheet metal is rusted away. If you would like to re-tool an older 2CV with rear belts, this sheet metal must be re-tooled! Made in Europe.

Quality: 3

Wheel housing at the rear right, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV, final version, Installed until year of construction 1990. Reproduction such as original. The rubber buffer is held by a sheet metal ring. The sheet metals are electrolytically galvanized. Suitable rubber buffer = 12046! Made in Europe.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €

Wheel housing at the rear right, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV, final version, Installed until year of construction 1990. Suitable rubber buffer = 12046 (a hole must be drilled in the rubber for the stud bolt)! With this version, the rubber buffer is only untwisted.

Quality: 3

• Suitable for this article
• Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year
  6,84 €

Wheel housing at the rear right, reinforcing plate for seat belt attachment rear. If a new wheel housing 15159 is on the left welded, this reinforcing plate is missing! Suitable for all Citroen 2CV, with lap belt rear. Made in Europe.

Quality: 3

2CV, wheel housing body edge rear on the left, (up to the rear end panel). Improved version! Heavier sheet metal and longer than our number 15198.

Quality: 1

2CV, Wheel housing body edge at the rear left. Very often the overlapping sheet metal on the rear end panel is rusty (beside the tail lamps). Made in Europe.

Quality: 3

2CV, wheel housing body edge rear on the right, (up to the rear end panel). Improved version! Heavier sheet metal and longer than our number 15199.

Quality: 1

2CV, Wheel housing body edge at the rear right. Very often the overlapping sheet metal on the rear end panel is rusty (beside the tail lamps). Made in Europe.

Quality: 3

Side panel at the rear left, large version, for Citroen 2CV. Complete side panel without interior fenders. The sheet metal is from the rear end panel to the B-support. Made in Europe.

Quality: 3

Side part, rear left, short version, 2CV. From rear panel till start of 3rd side window on C-pillar. Made in Europe.

Quality: 3

Side panel at the rear right, large version, for Citroen 2CV. Complete side panel without interior fenders. The sheet metal is from the rear end panel to the B-support. Made in Europe.

Quality: 3

Side part, rear right, short version, 2CV. From rear panel till start of 3rd side window on C-pillar. Made in Europe.

Quality: 3

2CV, Seat bench box complete for Citroen 2CV. This is a very good reproduction and in view of the quality better than the original seat bench box. Additionally, it is electrolytically galvanized. Made in Europe.

Quality: 3

• Suitable for this article
• Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fix
  7,83 €
• Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fi
  7,83 €

Seat bench box repair sheet metal in the interior, sheet metal strengthened. Made in Germany. The sheet metal is supplied without outer seat box corners. These have the number 15206 + 15207.

Quality: 1

Seat bench fixture sheet metal (2 pieces). Suitable for Citroen 2CV. The sheet metals are yellow galvanized. It is one on the left + one on the right crewed in the wheel house. Or. No. 5500757 + 5500758

Quality: 3

• Suitable for this article
• Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock. Re
  5,45 €
• Screw M6x20, galvanized
  0,25 €
• spring washer M6 galvanized
  0,15 €
• washer M6, galvanized
  0,13 €