Renault / 2CV4 / oil feed + oil cooling + oil filter

Rubber hose between air filter and oil filler neck, for 2CV. Inside diameter: ca 17-19mm, length: ca 280mm

Quality: 3

• Suitable for this article
• Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,82 €

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

Quality: 3

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot + Renault.
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

Quality: 4

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

Quality: 1 360°

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

Quality: 1

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Quality: 3

Oil pressure switch for Citroen 2CV starting from year of construction 1965. Response pressure 0,50 - 0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.

Quality: 3 360°

Oil pressure switch for Citroen 2CV6, Installed starting from year of construction 1965. Response pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.

Quality: 3 360°

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball fixture, slip piece (12,20mm long).

Quality: 3

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball fixture, slip piece (16,30mm long).

Quality: 3

Oil filler neck seal down, old version. For 2CV with 16 HP engines. Center in the middle about 30mm, hole spacing connector ca.46mm. Or. No. A221 92

Quality: 3

Oil filler neck for 2CV with 18 HP engine. Reproduction, Or.Nr.: A 221.03

Quality: 4 360°

Oil filler neck rubber cap, suitable for Citroen 2CV from 03/1963 to 1970. Reproduction. Or.Nr.: AZ17199

Quality: 4

Rubber, between oil filler neck and engine oil dipstick. Suitable for Citroen 2CV4 + 2CV6.

Quality: 3

Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center hole diameter about 28,5mm. Connector center to center, about 49mm

Quality: 3

Oil filler neck. Suitable for Citroen 2CV (also A-type), to year of construction 3/1963. Short overall height.

Quality: 4

Oil filter adapter screw for Citroen 2CV. For replacement to use of a larger oil filter in the summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.

Quality: 1 Pdf

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €

Oil filter flange, O-ring. Suitable for Citroen 2CV, Dyane. Dimension: 34 x 37.8 x 1,9mm. Made in Germany.

Quality: 3

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots. (Citroen 2CV)

Quality: 2

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Quality: 2

Distance bush for the connector the oil cooler at the engine block. Suitable for Citroen 2CV. Per piece.

Quality: 3

Screw (M7x100) for the oil coolers securement at the engine block. Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Distance bush for the connector the oil cooler at the engine block. Suitable for Citroen 2CV. P
  4,95 €

Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the connector in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm

Quality: 3

Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block). Suitable for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI

Quality: 3

Oil cooler. Suitable for Citroen 2CV, to year of construction 03/1963. Engine: 425cm ³. Reproduction. Or. No. A2251.

Quality: 4

Oil cooler for Citroen 2CV4. Or. no.: 5440575

Quality: 4

• Suitable for this article
• Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the conne
  0,48 €
• Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block
  14,86 €

Oil cooler pipe, old version. Suitable for Citroen 2CV, from the fifties and sixties. Or. No. AZ22588

Quality: 4

Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head). Suitable for Citroen 2CV.

Quality: 2

• Suitable for this article
• Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Leng
  4,95 €
• Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significa
  4,95 €

Oil line for 2CV 4. (from the engine block to the cylinder heads). Reproduction. Or.Nr.: AM2213C

Quality: 4

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt (extends, for defective thread) 2CV6, M7, for the screwed joint at the cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Lenght: 18mm, like original. Significant reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Engine oil dipstick guide tube. Suitable for Citroen 2CV6 + 2CV4 (602cc + 435cc)

Quality: 3

• Suitable for this article
• Rubber, between oil filler neck and engine oil dipstick. Suitable for Citroen 2CV4 + 2CV6.
  2,24 €
• Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine
  3,37 €

Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a

Quality: 4

Suction screen engine oil, mounts in the oil pan. Angular version, suitable for 2CV4. Or.Nr.: AZ221.1

Quality: 4 360°

Oil pump seal (paper gasket) for Citroen 2CV6, starting from year of construction 11/1970. Mounting holes 5x8mm.

Quality: 3