Renault / 2CV4 / heating + ventilation

Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall). Suitable for Citroen 2CV6 RHD (right hand drive). Made in Europe.

Quality: 3

Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall). Suitable for Citroen 2CV6. Made in Europe.

Quality: 3

• Suitable for this article
• Reversing lever for warm air distributors (at the front wall) Citroen 2CV. Or.Nr. AZ 644 115. M
  7,83 €

Heater hose connection connecting piece (small) on the right (welds at the front wall). Suitable for Citroen 2CV6. Made in Europe.

Quality: 3

Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after production, and corresponds to the original rubber.

Quality: 2

Ventilation shutter seal rubber, reproduction. For Citroen 2CV, all models.

Quality: 4

Ventilation shutters fly-screens, for Citroen 2CV. Produced from high-grade steel! Made in Germany by Franzose.

Quality: 1

Ventilation shutter 2CV to 1963/64. Without attachments. Linking of the ventilation shutter is about centric! The seal and the trim are the same, than from the other 2CV. Made in Europe.

Quality: 3

• Suitable for this article
• Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after pr
  22,71 €

Ventilation shutter for Citroen 2CV. Reproduction, without seal rubber + aluminum strip! Made in Europe.

Quality: 4

• Suitable for this article
• Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after pr
  22,71 €

Ventilation shutter for Citroen 2CV. Reproduction from high-grade steel! The Ventilation shutter is supplied without seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.

Quality: 1

• Suitable for this article
• Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after pr
  22,71 €

Ventilation shutters rubber seal (foam rubber), self adhesive, under the Ventilation shutter, at the body. Suitable for Citroen 2CV.

Quality: 3

Ventilation shutter completely (original), for Citroen 2CV. The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must paint before be adapted! Original Citroen, no reproduction!

Quality: 2

• Suitable for this article
• Nut M3 galvanized (chrome trim ventilation shutter)
  0,14 €

Ventilation shutter completely, for Citroen 2CV. Reproduction out of sheet metal. The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.

Quality: 4

Ventilation shutter completely, for Citroen 2CV. Reproduction from high-grade steel! The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.

Quality: 1

• Suitable for this article
• Nut M3 galvanized (chrome trim ventilation shutter)
  0,14 €

Ventilation shutter aluminum strip, 2CV. The strip is a little more matte than the original. 12x nut M3 (20166) are required!

Quality: 4

• Suitable for this article
• Nut M3 galvanized (chrome trim ventilation shutter)
  0,14 €

Ventilation shutter trim from polished high-grade steel, suitable for Citroen 2CV. Own reproduction. 12 x nut M3 are required. (20166)

Quality: 1

• Suitable for this article
• Nut M3 galvanized (chrome trim ventilation shutter)
  0,14 €

Elevating for the Ventilation shutter (handwheel). Suitable for Citroen 2CV. Reproduction

Quality: 3

Ventilation shutter, fixing clip for the Ventilation shutter linking. Suitable for Citroen 2CV.

Quality: 3

2CV, ventilation flap, re-fitting grid for air distribution towards the driver. This ingenious little grid redirects the airflow towards the driver when the ventilation flap is open. The grid is fitted within couple of minutes, using the clips supplied. So: ventilation system variable according to speed! We wouldn't want to do without it at high temperatures!

Quality: 1 Pdf

Ventilation shutter, pin for Ventilation shutter linking, Citroen 2CV, for all years of construction. Diameter: 5,0mm

Quality: 3

Securing clip suitable for the Ventilation shutter, for Citroen 2CV. (Securement installing handwheel at the Ventilation shutter)

Quality: 3

2CV4, heat exchanger on the right (original). Suitable for Citroen 2CV4, Dyane 4.

Quality: 0

Foam material plate on the flap of the heat exchanger, per piece! For Citroen 2CV 4+6.

Quality: 3

Spring for heating clap adjustment at the heating exchanger. For Citroen 2CV6 + 2CV4.

Quality: 3

Exhaust air flap warm air. Suitable for Citroen 2CV old, with on the crankshaft mounted generator. Or. No. AZ644 61

Quality: 4

Exhaust air hose Citroen 2CV4, from heat exchanger into the fender. 75mm diameter, 290mm long.

Quality: 3

2CV, Fender, seal for the exhaust air hose. Or.Nr.AY643-155A

Quality: 4

• Suitable for this article
• Exhaust air hose Citroen 2CV6, from exhaust heating (heat exchanger) into the fender. 80mm diam
  2,43 €

Label for the heater adjustment (red + blue spot). Suitable for Citroen 2CV + HY.

Quality: 3

Hot air (Defroster) nozzle seal, in the firewall (for the warm air funnel, above at the windshield). Suitable for Citroen 2CV. Or. No. AZ564-74B.

Quality: 3

Defroster adjustment lever (air distribution above down). Suitable for Citroen 2CV.

Quality: 3

Installation kit for hot air ventilator 14504. For Citroen 2CV.

Quality: 1

• Suitable for this article
• Heating air fan in snail form. By the design a larger air orifice is possible. For conversion i
  62,38 €

Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.

Quality: 3

Heating air fan in snail form. By the design a larger air orifice is possible. For conversion in Citroen 2CV. Without built-in set. The suitable built-in set has the number 14505.

Quality: 1 360°

• Suitable for this article
• Installation kit for hot air ventilator 14504. For Citroen 2CV.
  14,93 €

Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV! 80mm inside diameter, 15mm foam material. Overall length about 1000mm.

Quality: 3

Heating hose from felt, with metal spiral. Suitable for Citroen 2CV. About 43cm long, 55-60mm inside diameter.

Quality: 3

Heating hose from felt, with metal spiral. Suitable for Citroen 2CV. About 60cm long, 55-60mm inside diameter.

Quality: 3

Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972. Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B

Quality: 3

Heating hose 2CV6+4, isolate. Own reproduction. With aluminum core, 500mm long, 90mm outside diameter, 15mm foam material.

Quality: 1

• Suitable for this article
• Exhaust air hose Citroen 2CV6, from exhaust heating (heat exchanger) into the fender. 80mm diam
  2,43 €
• Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the w
  7,29 €

Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the warm air distributor in the engine compartment and the air duct at the windshield. The hose is isolate with foam material.

Quality: 3

Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of painted sheet metal. Or. No. 5403748

Quality: 3

Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction from polished stainless steel. Or. No. 5403748

Quality: 3

Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet metal holder is for both heater cables. Suitable for Citroen 2CV.

Quality: 3

Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet metal holder is for one heater cable. Suitable for Citroen 2CV.

Quality: 3

Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.

Quality: 3

Heater cable long, for Citroen 2CV6. Mounted at the heater adjustment lever in the interior to the heating exchanger. Installed one starting from 04/1972. Bowden cable about 1480mm long. Casing about 1250mm. The heater cable is individually shortenable.

Quality: 3

Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101

Quality: 3

Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101

Quality: 4

Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in Germany.

Quality: 3

Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in Germany.

Quality: 3

Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.

Quality: 3

Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version. With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.

Quality: 3