Renault / 2CV4 / steering rods

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Quality: 3

Tie rod, clip for the adjusting sleeve. Suitable for Citroen 2CV.

Quality: 4

• Suitable for this article
• Tie rod: M7 screw for the clip of the tie rod. Suitable for Citroen 2CV.
  0,56 €
• Self-locking nut M7
  0,44 €

Tie rod, on the left of or on the right fitting. 451,6mm lengthens. Only suitable for Citroen 2CV to year of construction 1973. Or. No. AM443-1. Note: After the year of construction 1973 the tie rods had a length of 497mm! Reproduction, without tie rod end. Thread: M14x1,25 right-hand thread

Quality: 5

• Suitable for this article
• Tie rods adjusting sleeve. Suitable for Citroen 2CV. (Coupling sleeve for tie rod with tie rod
  11,81 €
• Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.
  2,77 €
• Tie rod nut, self locking. For the securement at the steering gear. Suitable for all Citroen 2C
  0,58 €
• Tie rod, clip for the adjusting sleeve. Suitable for Citroen 2CV.
  3,18 €
• Tie rod: M7 screw for the clip of the tie rod. Suitable for Citroen 2CV.
  0,56 €
• Self-locking nut M7
  0,44 €

Tie rod, fits on the left of or on the right. 497mm lengthens. Only suitable for Citroen 2CV, from year of construction 1974 to 1990 (Dyane, Mehari). Note: Up to the year of construction 1973 the tie rods had a length of 451,6mm! Reproduction, without tie rod end.

Quality: 3

• Suitable for this article
• Tie rods adjusting sleeve. Suitable for Citroen 2CV. (Coupling sleeve for tie rod with tie rod
  11,81 €
• Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.
  2,77 €
• Tie rod nut, self locking. For the securement at the steering gear. Suitable for all Citroen 2C
  0,58 €
• Tie rod, clip for the adjusting sleeve. Suitable for Citroen 2CV.
  3,18 €
• Tie rod: M7 screw for the clip of the tie rod. Suitable for Citroen 2CV.
  0,56 €
• Self-locking nut M7
  0,44 €

Tie rod: M7 screw for the clip of the tie rod. Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Self-locking nut M7
  0,44 €

Tie rods adjusting sleeve. Suitable for Citroen 2CV. (Coupling sleeve for tie rod with tie rod end). Thread: M14x1,25

Quality: 3

• Suitable for this article
• Tie rod, clip for the adjusting sleeve. Suitable for Citroen 2CV.
  3,18 €
• Tie rod: M7 screw for the clip of the tie rod. Suitable for Citroen 2CV.
  0,56 €

Tie rods adjusting sleeves special! Suitable for Citroen 2CV + DS. It is an improved version with a hexagonal. Scope of delivery: 2x adjusting sleeve + 4x counter nut! Note: Note: The adjusting sleeves have 1x left-hand thread + 1x right-hand thread, also the counter nuts! Thread: M14x1,25

Quality: 1

Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.

Quality: 3

Tie rod nut, self locking. For the securement at the steering gear. Suitable for all Citroen 2CV, Dyane, Ami.

Quality: 3

Tie rod lever securement kit. Suitable for Citroen 2CV, starting from year of construction 1963.

Quality: 3

Tie rod lever fixing bolt. Suitable for Citroen 2CV. Dimension: M7 x 27,5mm. Tensile strength: 10.9

Quality: 3

Tie rod lever fixing bolt. Suitable for Citroen 2CV. Measurement: M7 x 37mm. Tensile strength: 10.9

Quality: 2

• Suitable for this article
• Tie rod lever safety sheet, suitable for Citroen 2CV. For tie rod levers with gradated secureme
  1,87 €

Tie rod lever on the left (premium quality), befitting for Citroen 2CV, from year of construction 1963 to 1990. The surfaces are completely polished and it give also no sharp edges. The surface is coated and hardened (Rockwell 60 HRC). By the coating and the smooth surface, the lever is more durable, because the friction are extremely reduced. Completely protected from corrosion. Made for "Franzose".

Quality: 1

• Suitable for this article
• Tie rod lever on the right (premium quality), befitting for Citroen 2CV, from year of construct
  144,74 €
• Tie rod lever safety sheet, suitable for Citroen 2CV. For tie rod levers with gradated secureme
  1,87 €
• Tie rod lever fixing bolt. Suitable for Citroen 2CV. Measurement: M7 x 37mm. Tensile strength:
  4,91 €
• Tie rod lever fixing bolt. Suitable for Citroen 2CV. Dimension: M7 x 27,5mm. Tensile strength:
  4,91 €
• Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This
  9,18 €

Tie rod lever on the left, suitable for Citroen 2CV, starting from year of construction 1963 to 1990. Made in France

Quality: 3

• Suitable for this article
• Tie rod lever on the right, suitable for Citroen 2CV, starting from year of construction 1963 t
  72,29 €
• Tie rod lever securement kit. Suitable for Citroen 2CV, starting from year of construction 1963
  10,86 €
• Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This
  9,18 €

Tie rod lever on the right (premium quality), befitting for Citroen 2CV, from year of construction 1963 to 1990. The surfaces are completely polished and it give also no sharp edges. The surface is coated and hardened (Rockwell 60 HRC). By the coating and the smooth surface, the lever is more durable, because the friction are extremely reduced. Completely protected from corrosion. Made for "Franzose".

Quality: 1

• Suitable for this article
• Tie rod lever on the left (premium quality), befitting for Citroen 2CV, from year of constructi
  144,74 €
• Tie rod lever safety sheet, suitable for Citroen 2CV. For tie rod levers with gradated secureme
  1,87 €
• Tie rod lever fixing bolt. Suitable for Citroen 2CV. Measurement: M7 x 37mm. Tensile strength:
  4,91 €
• Tie rod lever fixing bolt. Suitable for Citroen 2CV. Dimension: M7 x 27,5mm. Tensile strength:
  4,91 €
• Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This
  9,18 €

Tie rod lever on the right, suitable for Citroen 2CV, starting from year of construction 1963 to 1990. Made in France

Quality: 3

• Suitable for this article
• Tie rod lever on the left, suitable for Citroen 2CV, starting from year of construction 1963 to
  72,29 €
• Tie rod lever securement kit. Suitable for Citroen 2CV, starting from year of construction 1963
  10,86 €
• Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This
  9,18 €

Tie rod lever safety sheet, suitable for Citroen 2CV. For tie rod levers with gradated securement. Installed starting from year of construction 1963. Or.Nr.: AM41389

Quality: 4

• Suitable for this article
• Tie rod lever on the left, suitable for Citroen 2CV, starting from year of construction 1963 to
  72,29 €
• Tie rod lever on the right, suitable for Citroen 2CV, starting from year of construction 1963 t
  72,29 €

Split pin small, for the tie rod end nut + radius arm bearing. Suitable for Citroen 2CV. Measurement: 2 x 20mm

Quality: 3

Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note: this tool do not fit for tie rod end with strengthened nuts.

Quality: 3

• Suitable for this article
• Tie rod end locking nut. Suitable for Citroen 2CV. Reproduction
  2,59 €
• Tie rod end repair set on the left. Inclusive bearing pan, pressure spring, locking nut, collar
  62,38 €
• Tie rod end repair set on the right. Inclusive bearing pan, pressure spring, locking nut, colla
  62,38 €
• Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order
  12,79 €

Tie rod end on the left (only the case, without spring and bearing pans). Suitable for Citroen 2CV. Made one in Germany. Or.Nr.: A44398B. Thread: M14x1,25 left-hand thread

Quality: 2

• Suitable for this article
• Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order
  12,79 €

Tie rod end on the right (only the case, without spring and bearing pans). Suitable for Citroen 2CV. Made one in Germany. Or.Nr.: A44398C. Thread: M14x1,25 left-hand thread

Quality: 2

• Suitable for this article
• Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order
  12,79 €

Tie rod end repair set on the left. Inclusive bearing pan, pressure spring, locking nut, collar, safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.

Quality: 2

• Suitable for this article
• Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note:
  20,73 €

Tie rod end repair set on the right. Inclusive bearing pan, pressure spring, locking nut, collar, safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.

Quality: 2

• Suitable for this article
• Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note:
  20,73 €

Tie rod end locking nut. Suitable for Citroen 2CV. The nut is stronger and is easier to adjust.

Quality: 1

Tie rod end locking nut. Suitable for Citroen 2CV. The nut is additionally equipped with a lubrication nipple.

Quality: 1

• Suitable for this article
• Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note:
  20,73 €

Tie rod end locking nut. Suitable for Citroen 2CV. Reproduction

Quality: 4

• Suitable for this article
• Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note:
  20,73 €

Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order to repair the tie rod end inside. High quality. Suitable for all Citroen 2CV, AK, Dyane, AMI.

Quality: 3

• Suitable for this article
• Tie rod lever safety sheet, suitable for Citroen 2CV. For tie rod levers with gradated secureme
  1,87 €
• Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note:
  20,73 €

Spring in the tie rod end. Suitable for Citroen 2CV. Per side 1x spring is required.

Quality: 3

• Suitable for this article
• Tie rod end cup. Improved version, made of sintered metal. Per piece (per side 2 pieces require
  8,91 €

Tie rod end cup. Improved version, made of sintered metal. Per piece (per side 2 pieces required). Suitable for Citroen 2CV., AK, Dyane, AMI, Mehari

Quality: 1

• Suitable for this article
• Spring in the tie rod end. Suitable for Citroen 2CV. Per side 1x spring is required.
  3,87 €

Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This collar is produced in Europe for "Der Franzose". The collar is very flexible and can be mounted over the complete tie rod end, without it tears. Better than original!

Quality: 1

Tie rod end collar, suitable for Citroen 2CV, Dyane, AK, Ami. Good reproduction. Or.Nr.: A44313B

Quality: 4