for Renault Alle

Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing

Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.

Rubber coupling wiper engine (angular engine), inclusive rubber blocks securement wiper engine

Suitable for Peugeot 203, Peugeot 403, Peugeot 404. Renault Floride, Caravelle. Alpine A110 (connection between wiper engine + wiper linkages at the front wall!). Or. No. 6408.04 + 3x 6411.13 + 3x 6411.15

H7 bulb clearly, 12 Volt.

Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc

Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.

Retaining clip emblems for Citroen, Renault, Peugeot, old models. 2.5mm inner diameter (i.e. for

2.5mm pins on the emblems). Length: 7.5mm. Per piece

Fixture for the rod of the locking mechanism. Suitable for various Renault.

Fixture for angular switches (for mounting under the dashboard). Suitable for switch with 36x18mm

installation hole.

Retaining clip for the seal from the luggage compartment lid. Suitable for Citroen 11CV/15CV

Citroen DS. Dimension: 10 x 14mm. Also suitable for other French vehicles. Or. No. 802698, DM453-120C

Hand brake handle lifting rubber, suitable for Renault R8, R10, Caravelle, Floride, Dauphine

Alpine 110. This rubber is mounted under the hand brake handle. Or.Nr. 5544990

Hand brake cable Renault R16 in front, of year of construction 1965 to 1974. Or. No. 7700521741

Total length: 1940mm. Grommet: 1380mm.

Hand brake cable disc brake. Suitable for Renault Dauphine Gordini R1095, R8 1130 + Floride

starting from Ident. 421238. Caravelle R1133 starting from Ident. 29625. R10 R1190 + R1192 starting from Ident. 243215 (year of construction 1969 to 1972). Length totally: 1870mm. Sleeve: 820 + 810mm. Or. No. 8558509

Hand brake cable drum brake. Suitable for Renault Dauphine R1090, to year of construction 1963

Dauphine Gordini R1091, to year of construction 1963. Floride R1092, to year of construction 1963. Length totally: 1960mm. Sleeve: 2 x 700mm. Or. No. 8544992

Hand brake cable drum brake. Suitable for Renault Dauphine, Floride R1094 + R1095. R8 R1132 +

Floride R1131 to Ident. No. 372240. Caravelle to Ident. No. 205187. Length totally: 1900mm. Sleeve: 830 + 810mm. Or. No. 8551733

Hand brake cable. Suitable for Renault R8 Gordini, starting from Ident. No. 1233. Length totally

1950mm. Sleeve: 880 + 850mm. Or. No. 8558990

Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting of the spray. A

real alleviation.

szction pump (hand pump) for eG fuel, hydraulic liquid

Glove box lock completely. Suitable for Peuegot 504 + Renault R16. Renault Caravelle + Renault

Floride. Orignal manufacturer Neiman. No reproduction. Neiman No. 902481

Hand washing cream, 500ml

Flexible disk for the steering column. Suitable for Renault R4, R5, R8, R16, R18, Dauphine. Outside

diameter: 76mm. Inside diameter: 24mm. Pitch center diameter: about 50mm.

Hardener AK 210, 1 litre, for lacquers. Weight ratio 2 parts lacquer, 1 part hardener. Not for

metallic lacquers!!!!

hardener for filler, tube 25g.

Master brake cylinder, 1 inch (25,4mm) piston. Suitable for Citroen 11CV + 15CV. Citroen HY

Renault Fregate, Juva 4. Simca Vedette, Regence, Versailles to year of construction 7/1955. Made in Europe.

• Suitable for this article
• 
  Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for
  19,73 €
• 
  Collar for the master brake cylinder (for 1 inch (25,4mm) master brake
  4,86 €

Master brake cylinder. Brake system Bendix. Piston diameter: 19,05mm. Suitable for Renault R5, R16

R5, R17, R12, Fuego. Brake line connector: 3x M10x1 + 1x M12x1. Made in Europe.

Rear engine, brake piston 32mm, for the brake caliper rear. Suitable for Renault R8, R10, Dauphine

Floride, Caravelle, A110.

• Suitable for this article
• 
  Rear engine, brake caliper repair set, for 1 brake caliper in the front or in
  22,90 €

Rear engine, brake piston 38mm, for the brake caliper front. Suitable for Renault R8, R10

Dauphine, Floride, Caravelle, A110

• Suitable for this article
• 
  Rear engine, brake caliper sealing set. For piston diameters: 38mm! Suitable
  7,83 €
• 
  Rear engine, brake caliper sealing set, for 38mm piston! Note: The O-ring is
  7,83 €

Rear engine, brake power distributor sealing set. Dimensions: 13,5x9mm conical. 16x11mm conical

26x21mm. Suitable for Renault Floride + Caravelle, to year of construction 1970. Renault R8 + R10.

Rear engine, brake caliper sealing set, for 38mm piston! Note: The O-ring is 3,40mm wide. Suitable

for Renault R8+R10, Dauphine, Floride, Caravelle, alpine A110. Cross section of piston sealing ring is angular!

• Suitable for this article
• 
  Rear engine, brake piston 38mm, for the brake caliper front. Suitable for
  12,79 €

Rear engine, brake caliper sealing set. For piston diameters: 38mm! Suitable for Renault R8, R10

Dauphine, Floride, Caravelle, Alpine A110. The cross section of the piston sealing ring is round!

• Suitable for this article
• 
  Rear engine, brake piston 38mm, for the brake caliper front. Suitable for
  12,79 €

Rear engine, brake caliper at the rear left (new part). Brake system: Bendix. Piston diameter

32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF

• Suitable for this article
• 
  4CV/Dauphine/Caravelle/Alpine 110, brake hose rear. Suitable for Renault 4CV
  20,33 €

Rear engine, brake caliper at the rear right (new part). Brake system: Bendix. Piston diameter

32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF

• Suitable for this article
• 
  4CV/Dauphine/Caravelle/Alpine 110, brake hose rear. Suitable for Renault 4CV
  20,33 €

Rear engine, brake caliper repair set, for 1 brake caliper in the front or in the rear (32mm

piston). Suitable for Renault 8 + Alpine 110. This repair set is equipped with sealing rubbers for pistons in 32mm. But note: Only suitable for one brake caliper! Or No. 0870 293,000 + 0870 292,800. Only rubber seals, no pistons!

Rear engine, brake caliper front on the left. Brake system: Bendix. Piston diameter: 38mm. Suitable

for Renault R8, R10, A110, Floride, Caravelle, Dauphine.

• Suitable for this article
• 
  4CV/Caravelle/R8/A110, brake hose front. Suitable for Renault 4CV, starting
  21,72 €

Rear engine, brake caliper front on the right. Brake system: Bendix. Piston diameter: 38mm

Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine.

• Suitable for this article
• 
  4CV/Caravelle/R8/A110, brake hose front. Suitable for Renault 4CV, starting
  21,72 €

Rear engine, repair set for in 1 brake caliper front or rear (38mm piston). Suitable for Renault 8

Alpine 110. This repair set is equipped with sealing rubbers for the pistons in 38mm.

Heater valve. Suitable for Renault R12, R20. Renault Alpine A310. Or. No. 7701348153

Heli coil application M7. Length: 10,5mm (Thread repair)

Heli coil application M7. Length: 14,0mm (Thread repair)

Heli coil application M7. Length: 7,0mm (Thread repair)

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low

shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting

spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for

the roof and door linings.

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Cavity preservation on wax basis, for cavity pistol, 1 litre.

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Body cavity protection spray, 500 ml. Inclusive hollow space probe

• Suitable for this article

Cavity probe (60cm) for fluid film spray can (21127)

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +

800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.

Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.