for Peugeot Alle

P 504/505, transmission suspension rear. Suitable for Peugeot 504 Diesel + 505 Diesel. Or. No

1843.63 + 1843.68

P 504/505, transmission suspension rear. Suitable for Peugeot 504, starting from year of

construction 1979. Peugeot 505. Or. No. 1843.70

P 504/505, master brake cylinder dual circuit. Brake system: Bendix. Piston diameter: 20,6mm. 3x

brake line connector M10. Suitable for Peugeot 504 BREAK, starting from year of construction 07/1981. 504 Pick UP. 505 sedan.

• Suitable for this article
• 
  Vent screw M10x1. Suitable for Citroen 2CV to about year of construction 1975
  1,50 €

P 504/505, Y-pipe seal. Suitable for Peugeot 504 + 505. Or. No. 1710.24 + 1710.37 + 1710.96

P 504, elbow pipe in front (2 in 1). Suitable for Peugeot 504 sedan, of year of construction

07/1972 to 12/1980. Engine: XN1 + XN2 (engine capacity 1971cc). Peugeot 504 Cabriolet 2.0, of year of construction 08/1982 to 08/1984. Engine: XN2 (engine capacity 1971cc). Peugeot 505, of year of construction 01/1982 to 06/1983. Engine: XM7P (engine capacity 1796cc). Or. No. 1701.75 + 1702.68

P 504/505, radiator hose above. Suitable for Peugeot of 504 Diesel (2,3), Peugeot 505 (2,3D). Or

No. 1343.36 + 1343.61

P 504/505, clutch complet (Diesel). Suitable for Peugeot 504 D + 505 D. Engines: XD90, starting

from year of construction 08/1981 (2.1 L). XD2, starting from year of construction 08/1981 (2.3 L). For gearboxes: BA7, BA7/5. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Splines outside diameter: 29 mm. Or. No. 2001.92 + 2004.88

P 504/505, clutch taking cylinder. Suitable for Peugeot 504 petrol, starting from year of

construction 11/74 (4 + 6 liners). Peugeot 505 + 604. Piston diameter: 28,57mm. Connecting thread: M10x1. Or. No. 2086.10. Made in Europe.

• Suitable for this article
• 
  P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove
  1,49 €

P 504/505, steering gear bellow (mechanical steering). Suitable for Peugeot 504, starting from year

of construction 1986. Peugeot 505. Diameter about 47 + 11mm. Or. No. 4066.26

P 504/505, engine suspension in front. Suitable for Peugeot 504, starting from year of construction

1980. Peugeot 505. Engines Diesel: XD2S, XD3T. Engines petrol: ZEJ, ZDJ, N9T. Or. No. 1807.43

P 504/505, wheel bolt. Thread: M12 x 1,25. Length of thread: 38mm. Suitable for Peugeot 504 + 505

which have brake disks at the rear axle. Or. No. 3311.13

• Suitable for this article
• 
  P 504, wheel nut. Thread: M12 x 1,25mm. Suitable for Peugeot 504. Or. No
  1,83 €

P 504/505, rear left wheel brake cylinder, Bendix system. Suitable for Peugeot Berline, from year

of manufacture 04/1975. Peugeot 504 GL, GR, DR + Diesel from year of manufacture 07/1977. Brake line connection: M10x1. Piston diameter: 22 mm. Anchor plate bore: 36 mm. Overall length: 73 mm. Original no. 4402.41

• Suitable for this article
• 
  P 504/505, rear right wheel brake cylinder, Bendix system. Suitable for Peugeot
  19,60 €
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 504/505, rear right wheel brake cylinder, Bendix system. Suitable for Peugeot Berline, from year

of manufacture 04/1975. Peugeot 504 GL, GR, DR + Diesel from year of manufacture 07/1977. Brake line connection: M10x1. Piston diameter: 22 mm. Anchor plate bore: 36 mm. Overall length: 73 mm. Original no. 4402.42

• Suitable for this article
• 
  P 504/505, rear left wheel brake cylinder, Bendix system. Suitable for Peugeot
  19,60 €
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 504/505, silencer rear (1x 29,5cm + 1x 20cm), overall length 147cm. Suitable for Peugeot 504

(sedan, Cabrio, Coupe), of year of construction 1968 to 1983. Engine: 1,8L - 2,0L (petrol) + 1.9 - 2,3L (Diesel). Peugeot 505 (2,0L). Or. No. 1725.54

Lockcylinder set for door, Peugeot 504 starting from 1980. Peugeot 505.

P 504/505, shaft seal for the differential. Dimension: 45 x 62 x 10,5mm. Suitable for Peugeot 504

sedan + Cabrio (also V6). Peugeot 505. Or. No. 3121.13

P 504/505, anti roll bar rod rear. Suitable for Peugeot 504 Break + 505 Break. Or. No. 5178.05

Carburetor repair set Peugeot 504 + 505 2000ccm. Carburetor Pierburg 35/40 INAT.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 504/505, Carburetor sealing set Solex 34 BISCA. Suitable for Peugeot 504 GL/GR. Peugeot 505 (1,8L)

P 504/505, Carburetor sealing set Zenith 35/40 INAT. Suitable for Peugeot 504 GL/GR. Peugeot 505

GR/SR/GL

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Seal under carburetor Peugeot 504, P 505, Talbot Tagora. Carburetor 32 MIMSA. Please compare

accurately the illustration!

P 504/505, front muffler. Suitable for Peugeot 504 sedan (GL + TI), of year of construction 01/1971

to 06/1983. Engine: 1796cc + 1971cc. Peugeot 504 Cabriolet 2,0. Of year of construction 10/1974 to 08/1984. Peugeot 505 (1971cc + 1995cc). Or. No. 1720.16 + 1720.57 + 1720.72 + 1721.23 + 1721.34. Overall length: 828mm. Connection diameter in front + rear: 46mm. Silencer height: 113mm. Silencer wide: 210mm.

P 504/505, water pump, with disengageable fan. Length of the shaft: 55mm. Suitable for Peugeot 504

Peugeot 505. For 1,8 + 2.0 engines. (XM). Starting from serial number: CH3061637. Or. No. 1201.31 + 1201.89 + 1202.82 + 1202.97

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  P 504/505, water pump seal. Suitable for Peugeot 504, Peugeot 505. For 1,8 +
  8,63 €

P 504/505, water pump. Suitable for Peugeot 504 (1,8L + 2,0L), Peugeot 505 (1,8L + 2,0L). Engine

code: XM. Rigid fan blade. Length of the shaft: 40mm. Installed starting from year of construction 8/1979. Or. No. 1202.98 + 1201.90

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  P 504/505, water pump seal. Suitable for Peugeot 504, Peugeot 505. For 1,8 +
  8,63 €

P 504/505, water pump seal. Suitable for Peugeot 504, Peugeot 505. For 1,8 + 2.0 engines. (XM)

Starting from serial number: CH3061637. Or. No. 1206.21. Made in Germany

P 504/505/104, Carburetor sealing set Solex 32/35 TMIMA. Suitable for Peugeot 504 GL/GR. Peugeot

505 GR/SR/GL. Peugeot 104 ZS

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 504/505/604, drive shaft collar (with sheet metal case), wheel side. Suitable for Peugeot 504

505, 604. Diameter: 82,6mm + 26,7mm. The metal casing is 110mm long. Or. No. 3293.50 + 3293.57

P 504/505/604, mounting (fixture) rear axle, on the left (rubber metal handle). Dimension: 45 x 69

x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.16

P 504/505/604, mounting (fixture) rear axle, on the right (rubber metal handle). Dimension: 45 x 69

x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.17

P 504/505/604, brake pads mounting set rear. Brake system: Lucas. Suitable for Peugeot 504

starting from year of construction 1981. 505, 604.

brake pads, front, Peugeot 504,505,604, System Bendix, 105mm wide, 65mm high, 18mm thick, Or.no

425021

P 504/505/604, brake caliper in front. Depending upon assembly position: Behind the axle on the

right or before the axle on the left. Suitable for Peugeot 504, 505 + 604. Brake system: ATE. Or. No. 4400.48. In the exchange, plus 150 Euro Old part deposit. For brake disk thickness: 12,9mm. 1 piston. Piston diameter: 54mm.

P 504/505/604, front brake disc set. Suitable for Peugeot 504 V6 (Cabriolet + Coupe) from 1974 to

1984. Peugeot 505 + 604. The brake discs are ventilated. Diameter: 273mm. Or. No. 4246.70 + 4246.H2

P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5

Suitable for Peugeot 504, 505, 604. Or. No. 3640.15

P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5

Suitable for Peugeot 504, 505, 604. Or. No. 3640.25

P 504/505/604, radiator hose reduction connection. Diesel engine: XD88, XD90, XD2. Suitable for

Peugeot 504D (starting from year of construction 1970), 505D, 604D. Inside diameter: 32,0 + 38,0mm. Or. No. 1350.27

P 504/505/604, radiator hose down (connecting tube to the radiator). Diesel engine 2.3 (XD2) + 2,5

Engine capacity: 2304cc + 2498cc. Suitable for Peugeot 504 D, 505 D + TD, 604 TD. Or. No. 1350.46

P 504/505/604, clutch master cylinder. Suitable for Peugeot 504 + 505, all petrols starting from

year of construction 11/1974. Peugeot 504 + 505 all Diesel, starting from 11/1970. Peugeot 604 Diesel + V6. Piston diameter: 19,05mm. Connecting thread: M10x1. Distance fixing holes: 50mm. Or. No. 2095.15 + 2095.17 + 2094.18. Made in Europe.

P 504/505/604, liner gasket bottom (4x). Suitable for Peugeot 504 (engine XN2) + 604 + 505 (engine

XN6). Outer diameter: 99.6mm. Inner diameter: 93.2mm.

P 504/505/604, steering sleeve (power steering). Large opening. Suitable for Peugeot 504 from 1980

years of construction. Peugeot 505 + 604. Connection diameter: approx. 40mm. Or. No. 4066.17. The power steering normally has a sleeve with a large and one with a small opening.

• Suitable for this article
• 
  P 504/604, Steering sleeve (for power steering), small opening.. Per piece
  9,82 €

P 504/505/604, wheel bearing rear. Dimension: 84 x 42 x 36mm. Suitable for Peugeot 504 sedan, of

year of construction 1968 to 1985. 504 Cabrio + Coupe, of year of construction 1976 to 1981. Peugeot 505 + 604. Or. No. 3326.13. Made in Spain

• Suitable for this article
• 
  Hub nut. Thread: M18 x 1,5. Suitable for Peugeot 104, 204, 304, 403, 504
  2,73 €
• 
  nut, driveshaft, Peugeot 104,204,304,305,404,504. thread: M16x1,5 , wrench
  4,87 €
• 
  Hub nut rear, Peugeot 404, 505, 505, 604. Thread M25 x 1,5, width accross flats
  4,94 €

Wheel bearing Peugeot 504, 505, 604. Measurements: 25x47x15mm.

P 504/505/604, wheel bearing in front, interiorlaterally. Dimension: 32 x 58 x 17mm. Suitable for

Peugeot 504, 505, 604. Talbot Togara. Or. No. 3730.17 Made in Spain

P 504/505/604, repair set ball joint (ball and socket joint - wishbone). Firs on the left of or on

the right. For Peugeot 504, 505 + 604. Or. No. 3640.13

Mounting bush shock absorber rear for Peugeot 504 (A,M) 1,8 from 06/1968 to 02/1971, for Peugeot

t 505 1,8 from 06/1981 to 10/1985, for Peugeot 604 2,3D from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, length: 24mm, total length: 73,8mm. Or.no.: 524816

Mounting bush wishbone for the front axle, for Peugeot 504 from 07/1968 to 02/1971, for Peugeot 505

5 from 06/1981 to 10/1985, and for Peugeot 604 from 09/1979 to 05/1983. Diameter 38mm, length 42mm, inside diameter of 16mm.

P 504/505/604, bonded-rubber bushing, for the securement from the assisted steering cylinder (the

simple power steering). Suitable for Peugeot 504, 505, 604. Inside diameter: 12mm. Outside diameter: 22mm. Length inside: 24mm. Length outside: 20mm. Or. No. 4059.05

P 504/505/604, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot to year 1980. Peuheot 505 + 604.

P 504/505/604, anti roll bar rod, rear axle. Suitable for Peugeot 504 sedan (apart from Luxe), 504

Cabriolet + Coupe. 505 sedan, 604. Length over everything: about 175mm. Or. No. 5178.03

P 504/505/604, Alpine A310. Mounting (fixture) rear axle (rubber metal handle). Dimension: 69 x

40mm. Heavy one: 24/38mm. Suitable for Peugeot 504, 505, 604. Renault Alpine A310. Or. No. 5152.18