Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
suitable for Citroen, Peugeot, Renault.
for Renault 2CV4
2601 Articles | Page 46 of 53
Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY
11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France
Plug protection against humidity, made of rubber to wrap around the plug connections, suitable for
2CV, only on the bracket assembly for the headlamps.
Stud bolt M8 x 35. For the securement of the carburetor on the intake manifold. Suitable for
Citroen 2CV6 + 2CV4. (round + oval carburetor). Or. No. 26 161 509
Stop sleeve for the clutch cable (2CV to year of construction 1967, with diagonal clutch release
fork lever) and for the hand brake cables drum brake. Or. No. A454-76.
Shock absorber (2 fittings) in the rear, for Citroen 2CV + Dyane. For 12mm shock absorber
securement. Manufacturer "Record France". Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Air in the shock absorber is removed! These shock absorbers are oil pressure shock absorbers are soft. Just as the 2CV was originally delivered.
Shock absorber (2 fittings) in front, for Citroen 2CV + Dyane. For 12mm shock absorber securement
Manufacturer "Record France". Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Air in the shock absorber is removed! Length compressed: 340mm. Extended: 500mm. These shock absorbers are oil pressure shock absorbers are soft. Just as the 2CV was originally delivered.
Gas pressure shock absorber (2 fittings) in the rear, for Citroen 2CV. For 12mm shock absorber
securement. Manufacturer "Record France". The gas pressure shock absorbers are a bit firmer (but not hard), but have a more sensitive response. Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. We only use gas pressure dampers on our 2CVs. So that's our recommendation!
Gas pressure shock absorber (2 fittings) in front, for Citroen 2CV. For 12mm shock absorber
securement. Manufacturer "Record France". The gas pressure shock absorbers are a bit firmer (but not hard), but have a more sensitive response. Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Length compressed: 340mm. Extended: 500mm. We only use gas pressure dampers on our 2CVs. So that's our recommendation!
Shock absorber rear, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer Boge
Sachs! The Boge Sachs shock absorber is very soft!
Shock absorber in front, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer
Boge Sachs! The Boge Sachs shock absorber is very soft!
Shock absorber pin - washer, medium version. Suitable for Citroen 2CV with 12mm shock absorber pin
Measurement: 12,5 x 35 x 5mm.
26 long nut, for the original shock absorber pin. Suitable for Citroen 2CV. Original one, our shock
absorber pin 12066 is fastened with a 27mm key!
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm diameter. For 26mm tool
mounting. Bad reproduction.
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm thread diameter for the
shock absorber. Made in Germany, from high-strength steel.
Valve push rod tube for 2CV4 (425ccm engine). Length totally: 165mm, diameter 16mm, fit (set off)
at the cylinder head: 15mm.
Follower tubing seal - sheet metal plates, for Citroen 2CV to year of construction 1972. Suitable
for the follower tubing seal with wide connecting post. Per piece!
Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!
Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting from year of
construction 07/1979 to 1990. This screw set contains all screws for the mounting of the bumper (with screws of the bumper fixture at the chassis). 44 components!
Bumper mounting kit (screws) in front. Suitable for Citroen 2CV6, starting from year of
construction 07/1979 to 1990. This screw set contains all screws for the mounting of the bumper (with screws of the bumper fixture at the chassis and the bumper overriders). 52 components!
Bumper rear wide, suitable for Citroen 2CV + Dyane. Reproduction from high-grade steel, without
adhesive strips! Our bumper 16514 is high polish! Made in Europe.
Bumper rear for Citroen 2CV (Dyane), out polished high-grade steel. Particularly for 2CV
manufactured. (High version). The bumper is manufactured into complex manual work and is polished then about 3 hours!
Bumper rear for Citroen 2CV. Low version. Installed from year of construction 06/1963 to 1974. The
bumper is delivery without adhesive strip (16510). The bumper is primed beige and should be painted. Made in Europe.
Bumper rear for Citroen 2CV6 + 4, high (11cm) version! Installed from year of construction 09/1974
to 07/1990. The bumper is delivered without black adhesive strips (16537). The bumper is primed beige and should be painted. Made in Europe.
Bumper adhesive strip wide (black). Bumper rear, for 11cm high bumpers. Suitable for Citroen 2CV
V, Installed of year of construction 09/1974 to 07/1990. Made in Germany
Bumper adhesive strip narrowly. Color black. Measurements of 1490x30mm. Suitable for 2CV bumper in
front, Installed from 09/1974 to 1990. The adhesive strip fits also for the rear, narrow (9cm highly) bumper.
Bumper in front for Citroen 2CV, out polished high-grade steel. Particularly for 2CV manufactured
Inclusive 2 overrider from high-grade steel! The bumper is manufactured into complex manual work and is polished then about 6 hours!
Bumper in front, for Citroen 2CV6 + 4. Installed from year of construction 06/1963 to 07/1990. The
bumper is delivery without black adhesive strip. (16510). The bumper is beige grounding and should be painted. Made in Europe.
Bumpers rubber grey rear, for Citroen 2CV. This rubber was mounted starting from 1963 to about 1975
instead of black adhesive strips and fits only on the low (7,6cm) high bumper.
Bumpers rubber grey, in front, for Citroen 2CV. This rubber was mounted starting from 1963 to 1975
instead of black adhesive strips.
2601 Articles | Page 46 of 53
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
