for Renault 2CV4
2600 Articles | Page 25 of 52
Handbrake lever (handle) repair kit. Suitable for Citroen 2CV6 + 2CV4. The repair kit consists of
the push button (to unlock) and the push rod.
VIDEO Plastic guide for the parking brake in the front wall. This plastic glider is in the engine
compartment Installed. Suitable for Citroen 2CV, starting from year of construction 12/1973. Or.Nr.5432385
Sheet metal holder bracket for the plastic guide (16063) of the parking brake. Suitable for Citroen
2CV starting from 12/1973. (Synthetic guide by the front wall into the engine compartment.) Made in Germany.
Hand brake handle tension spring. Mounted between hand brake handles at the chassis and the
chassis. Suitable for Citroen 2CV with front drum brake. (to year of construction 1981). Or.Nr.: A454 9
Hand brake cable adjusting nut (butterfly nut). Suitable for Citroen 2CV with front drum brake
Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV, of year of construction 1966 to 1981
Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable mounting in front on the left. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder)
Suitable for Citroen 2CV.
Master brake cylinder fixing bolt (in the front wall). Suitable for Citroen 2CV with hanging brake
pedal. The screw are the same, if you have a single circuit brake system or dual circuit. Also for LHM and DOT brake system.
Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with single circuit
brake system and hanging brake pedal. Or.Nr.: A453-211. Made in Germany.
Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for
Citroen 2CV6 + 2CV4 with hanging brake pedal. (for the brake system LHM + DOT). Per piece
Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for
Citroen 2CV starting from year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 20,63mm (13/16 inch).
Master brake cylinder repair set. Brake system DOT. Dual circuit brake system. Suitable for Citroen
2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.
Master brake cylinder push rod (adjustable). Length: 88mm. Mounted between brake pedal and master
brake cylinder. Suitable for Citroen 2CV with hanging pedals.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
AZU, AK, of year of construction 05/1967 to 1973. Hanging brake pedal! Piston diameter: 19,0mm. Brake line connector: 2x 9,0mm (M9). Or. No. AY453-03D + AY453-03E. Note: The master brake cylinders are converted from us on a better base valve (residual stress valve).
Master brake cylinder, brake system DOT. Single circuit brake system. Piston diameter: 19,0mm
Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 11/1970 to 7/1976. Hanging brake pedal! Made in Europe.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.
Master brake cylinder, brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV, of
year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.
Master brake cylinder, brake system DOT. Dual circuit brake system. Piston diameter: 20,6mm. Brake
line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.
Main cable harness for Citroen 2CV. Installed from year of construction 02/1970 to 07/1973. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 04/1966 to 02/1970. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 04/1967 to 02/1970. 6 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 06/1965 to 04/1967. 6 V
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 07/1973 to 09/1974. 12 Volt
technique. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 09/1962 to 06/1965. 6 V
technology. Made in Germany.
Main cable harness for Citroen 2CV. Installed from year of construction 09/1974 to 07/1981. 12 Volt
technique. Made in Germany.
Main cable harness, suitable for Citroen 2CV6, starting from year of construction 07/1981 to 1990
With connection for reversing lamps. The tail cable harness must be specially ordered! Made in Germany.
Tail - Shutter. Suitable for Citroen 2CV4 + 2CV6, with normal rear window. Quickly installed (the
brackets are only inserted into the upper and lower rear window rubber). A typical accessory from the sixties + seventies. Made in France
Rear rack from aluminum. Dimension: 870 x 370 x 100mm. Drilling measurement: 490 x 445mm. For the
securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel, with wooden strips. Dimension: 890 x 470mm. Drilling
measurement: 490 x 445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel. Dimension: 870 x 370 x 100mm. Drilling measurement: 490 x
445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel. Suitable for Citroen 2CV. Reproduction of the original
porter. Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes.
Rear rack, black primed. Suitable for Citroen 2CV. Reproduction of the original porter
Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes (Drilling dimensions - hole spacing: 490 x 350 mm).
Tail cable harness, suitable for Citroen 2CV6, starting from year of construction 07/1973! (with
connection for a reversing lamp). Made in Germany.
2600 Articles | Page 25 of 52
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
