for Renault 2CV4
2598 Articles | Page 8 of 52
2CV, soft top hood cross panel (cross beam rear crosswise). That is the mounting for the hinge
strip of the luggage compartmend lid. Suitable for Citroen 2CV.
2CV, roll roof mounting outside. White plastic ring. This plastic ring replaced the metal bracket
(our no. 17093), and was fitted until the Citroen 2CV production end in 1990. The push button for the retaining straps is fitted on this ring.
2CV, Roll roof securement sheet metal from high-grade steel. On the sheet metal the push-button is
locked. This sheet metal is until about 1976 Installed. Afterwards it was renewed by a white plastic ring. The sheet metal is however better than the plastic ring and can be trouble-free renewed. Made in Germany.
2CV, Soft top hood closing cap in front on the left from aluminum casting. Note: Only suitable for
2CV with roll roof buckle outside!. Bore for the connector must be adapted depending upon year of construction.
2CV, Soft top hood closing cap in front on the right from aluminum casting. Note: Only suitable for
2CV with roll roof buckle outside!. Bore for the connector must be adapted depending upon year of construction possibly.
2CV, Soft top hood handle securement sheet metal, from high-grade steel. (With this sheet metal the
roll roof handle is screwed above to the soft top hood.) Suitable for Citroen 2CV with soft top hood inside closing. Made in Germany.
2CV, Soft top hood handle inside in front, for Citroen 2CV with soft top hood inside closing
Material: Synthetic grey
2CV, Roll roof lug, suitable on the left above at the windshield frame and on the right rear on the
rear end panel! For Citroen 2CV, Installed over all years of construction!
VIDEO 
2CV, Roll roof lug, suitable on the right above at the windshield frame and on the right left on
the rear end panel! For Citroen 2CV, Installed over all years of construction!
2CV, Soft top hood buckle on the left + on the right, (1 pair). Reproduction from high-grade steel
Very good reproduction, optically like original.
Head light bracket 2CV (RHD)! Suitable for Citroen 2CV, to year of construction 1990. Caution, only
for vehicles with steering wheel on the right (RHD)
Head light bracket 2CV old, second version! For 2CV starting from year of construction 1961. (The
first models after corrugated sheet bonnet!)
Head light bracket for Citroen 2CV. It is the narrow, third version. This holder is installed in
the seventies, and is not suitable for angular headlamps! Poor quality.
Head light bracket 2CV6 (original)! Wide version. Suitable for Citroen, of year of construction
1977 to 1990 (also suitable for angular headlamps). Original, no reproduction
Head light bracket mounting foot (1 pair), for Citroen 2CV6. 1 set = 1x on the left + 1x on the
right. The sheet metals are untreated, so that they can be coated. Made in Germany.
2CV, headlamp holder, spacer sleeve in the headlamp holder for headlamp height adjustment. Suitable
for Citroen 2CV. The sleeve is 26mm long, has 10mm diameter. Re-manufactured from stainless steel!
2CV, headlight holder, spring for headlight height adjustment. Suitable for Citroen 2CV (per
piece). Or. No. AK54151
2CV, headlight carrier, threaded bolt for the headlight height adjustment. This bolt holds the rod
for the adjustment. It is the last version, installed until 1990. Or. No. A54186
Signature label "C I T R O E N" for the chrome hinge strip of the luggage compartment lid (long
signature). Suitable for Citroen 2CV.
Signature label "C I T R O E N" for the chrome hinge strip of the luggage compartment lid (short
signature). Suitable for Citroen 2CV.
2CV, box sill on the left completely, for Citroen 2CV. The box sill have the stud bolt for the
fender securement and the fine threads for the seat belt attachment. Installed one starting from 04/1970. Made in Europe.
2CV, box sill on the left completely, inclusive wing/fender thread + seat belt attachment. Starting
from year of construction 04/1970. Absolutely properly matching reproduction with all threads. Made by Franzose
2CV, box sill on the right completely, for Citroen 2CV. The box sills have the stud bolt for the
fender securement and the fine threads for the seat belt attachment. Installed one starting from 04/1970. Made in Europe.
2CV, box sill on the right completely, inclusive wing/fender thread + seat belt attachment
Starting from year of construction 04/1970. Absolutely properly matching reproduction with all threads. Made by Franzose
Side panel at the rear left, large version, for Citroen 2CV. Complete side panel without interior
fenders. The sheet metal is from the rear end panel to the B-support. Made in Europe.
Side part, rear left, short version, 2CV. From rear panel till start of 3rd side window on
C-pillar. Made in Europe.
Side panel at the rear right, large version, for Citroen 2CV. Complete side panel without interior
fenders. The sheet metal is from the rear end panel to the B-support. Made in Europe.
Side part, rear right, short version, 2CV. From rear panel till start of 3rd side window on
C-pillar. Made in Europe.
2CV, Seat bench cover rear. Vinyl black. The sides are closed. The surface is perforated (pierced
sample). Made in France.
2CV, Seat bench cover front. Vinyl black. The sides are closed. The surface is perforated (pierced
sample). Made in France.
2CV, Seat bench box complete for Citroen 2CV. This is a very good reproduction and in view of the
quality better than the original seat bench box. Additionally, it is electrolytically galvanized. Made in Europe.
Seat bench box on the left, sheet metal for the transition from the wheel housing to the box sill
The sheet metal is at the bottom surface of the seat bench box. Made in Germany.
Seat bench box on the right, sheet metal for the transition from the wheel housing to the box sill
The sheet metal is at the bottom surface of the seat bench box. Made in Germany.
Seat bench box repair sheet metal in the interior, sheet metal strengthened. Made in Germany. The
sheet metal is supplied without outer seat box corners. These have the number 15206 + 15207.
2CV, Seat bench box reinforcement cross-beam, for 2CV. This cross-beam is on the inside from the
seat bench box! Per piece.
Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fixed
between box sills and the sheet metal 15180. Made in Germany.
Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fixed
between box sills and the sheet metal 15181. Made in Germany.
2CV, seat bench box, sheet metal centrically, for the bottom surface of the seat bench box
Suitable for Citroen 2CV. On the left + on the right of this sheet metal, connect the sheet metals 15180 + 15181. Made in Germany.
2CV, seat bench box, sheet metal bottom surface, centrically, like original with all flanges and
indentations. On the left + right connect sheet metals 15180 + 15181. Made in Europe.
Seat box corner at the rear left. Suitable for Citroen 2CV. That is the diagonal corner plate which
you can see, if one opens the rear door. Made in Germany.
Seat box corner at the rear right. Suitable for Citroen 2CV. That is the diagonal corner plate
which you can see, if one opens the rear door. Made in Germany.
Seat bench fixture sheet metal (2 pieces). Suitable for Citroen 2CV. The sheet metals are yellow
galvanized. It is one on the left + one on the right crewed in the wheel house. Or. No. 5500757 + 5500758
2598 Articles | Page 8 of 52
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
