Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from
silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.
for Renault 2CV4
2599 Articles | Page 50 of 52
Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains
pre-grinding paste (rough) and regrinding paste (fine).
- Suitable for this article
Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of
construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9
Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm inside diameter, 12,55mm
outside diameter, 50,50mm long.
Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside diameter, 12,55mm
outside diameter, 45mm long.
Valve stem seal inlet, for AMI6, 2CV4. Inside diameter 7,8mm, outside diameter 9,9mm-13,2mm
strength 10mm. Per piece!
Carburetor sealing set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. With carburettor jets.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. Without carburettor jets.
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 125
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 135
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 150
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 155
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 160
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 170
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 175
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor, distance plate. Installed in Citroen 2CV with 375 + 425cc with round
carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98
Latching pin, which is inserted from above into the medium seat slide. Suitable for Citroen 2CV. It
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement
10x14x27,5mm. Very good after production from the European Union.
Motor-gearbox screw connection: Short stud bolts (these are the lower stud bolts) between the motor
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
Motor-gearbox screw connection: long stud bolts (these are the upper stud bolts, as they also hold
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the left. Suitable for
Citroen 2CV. Made in Germany.
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the right. Suitable for
Citroen 2CV. Made in Germany.
Front axle cover plate on the left, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover plate on the right, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover sheet. (Cover at the steering gear, below the tie rod securement). Suitable for
Citroen 2CV. Or. No.: A44278A
Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable
for Citroen 2CV. Or.Nr.A44295
Front axle pipe - steering gear in the exchange. Suitable for Citroen 2CV4 + 2CV6. Top outdated
all bearings and pinions are accurately bedded in and measured. The steering worm and the gear rack are re-tooled with grease nipple. To lubricate thus at any time from the outside. 250 euros Old part deposit.
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
2599 Articles | Page 50 of 52
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
