for Renault 2CV4
2598 Articles | Page 22 of 52
Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating
wheel bearings, cardan joints etc.
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Grease tape, ideal for sealing of body parts, 10 metres long, 50 mm wide. This grease tape is also
very well suitable for sealing the chassis to the body for Citroen 2CV, R4, etc.
Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel
bearing, rear in the drum.
Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!
Fire extinguisher 1kg. The "Auto & Bike" fire extinguisher is designed for extinguishing fires in
cars, lorry cabins, motorhomes and motorbikes and can also be used on electrical appliances with a voltage of up to 1000 volts. It can be carried in the car or stored in the garage at temperatures from - 15° to max. 60°C. Certified extinguishing capacity of (21B/3A). GS (German test mark) tested, tested by the fire brigade, used by the police, no minimum durability date! Cannot be used against grease fires!!! Super useful in the car and especially in the workshop! (welding work)
Centrifugal clutch bearing for 2CV6+4, measurement: 17x40x12mm, Inside diameter: 17mm, outside
diameter: 40mm, overall height: 12mm. Or.Nr.: ZC9620103
Centrifugal clutch, nut for the bearing. Reproduction. Suitable for Citroen 2CV. Measurement
16x150mm. Or.Nr. A332 5, AZL6
Centrifugal clutch ring with friction linings. Lining-wide 26mm. Suitable for Citroen 2CV6 with
centrifugal clutch. Or.Nr.: AM312-7, AZL6
Fluid film AS-R 400ml spray can. Long-term corrosion protection + penetrating oil. The can is
delivery with a 15cm long spray pipe. Optimally for underbody coating, hollow spaces etc.. A suitable cavity probe is supplyable under the No. 21129. Viscosity: low like syrup.
Fluid metal, 25ml to fill up cracks, holes, cavities. For repairing tubes, tanks, screw threads
etc. Applicable on iron, cast ion parts, aluminium. Oil, petrol, water and alcohol immune. Can be polished, sawed and drilled after hardening!
Liquid metal 50ml. It is called liquid metal or cold metal. But the correct name is 2-component
epoxy resin. We wouldn't want to be without it in our car first-aid kit and it has helped us many times with minor breakdowns. The 2K material hardens very quickly. It can be sanded, drilled and threaded afterwards. Resistant to water, oil, fuel and many chemicals. Sandable and paintable. Very easy to use thanks to a mixing tube supplied. Other mixing tubes are also available (if you don't need the whole tube).
Guide suitable for the throttle linkage, for Citroen 2CV. 28mm wide. (Only for vehicles with
throttle linkage!) Made in Germany.
Guide suitable for the throttle linkage, for Citroen 2CV. 40mm wide. (Only for vehicles with
throttle linkage!) Made in Germany.
Guide bolt for the hand brake cable. Suitable for Citroen 2CV with front drum brake. The hand brake
cable is led by the pin. Or.Nr.: A 454 75
Seal in the pedal floor (front wall), for the gas linkage. Suitable for Citroen 2CV with foot
throttle, what is mounted on the pedal floor.
Throttle linkage clip, suitable for Citroen 2CV + HY. Only for vehicles with throttle linkage, not
for 2CV6 with throttle control cable! Or. No. AM124-121. Note: There is also the clip 10588. Those is curved 180° differently around.
Throttle linkage clip, suitable for Citroen 2CV + HY. Only for vehicles with throttle linkage, not
2CV6 with throttle control cable! Or.Nr. AZ124121. Note: There is also the clip 10690. Those is curved 180° differently around.
Collar for the seal, for the guide of the throttle linkage. Suitable for Citroen 2CV. (only for
vehicles with throttle linkage!)
Throttle linkage retreat spring. Suitable for all Citroen 2CV + Mehari with throttle linkage,
1963. Not suitable for 2CV with throttle control cable! Or.Nr.: AZ1425
Foot throttle stop rubber, for Citroen 2CV. The rubber is mounted above in the foot throttle, for
vehicles with being foot throttle. (the foot throttle is mounted on the pedal floor plate)
Foot throttle being for Citroen 2CV, mounts on the pedal floor plate. The foot throttle is tapered
above. Installed in a 2CV starting from 03/1966.
Foot throttle being for Citroen 2CV, mounts on the pedal floor plate. Suitable for Citroen 2CV, to
year of construction 03/1966.
Foot throttle fixture down, for Citroen 2CV. For Citroen 2CV with being foot throttle. (Foot
throttle is mounted on the pedal floor). The fixture must be adapted! There is unfortunately no good foot throttle fixtures more supplyable!
Foot throttle mounting board (fixture) down. For Citroen 2CV with being foot throttle. (Foot
throttle is mounted on the pedal base.) Made in Europe.
Noise damming mats self adhesive. Color grey. Measurements: 1000 X.500 x 11mm. Stuffing contents
2x damming mat. Universal fitting.
PDF FILE Gearbox cap seal for Citroen 2CV/AMI6, Dyane. Suitable for the old gearbox, Installed off about
year of construction 1963.
Transmission suspension at the front axle, for Citroen 2CV4+6, (engine suspension rear)
Reproduction. Made in Europe.
Gearbox suspension on front axle: Locking plate for the screw connection on the gearbox. Suitable
for 2CV4 + 2CC Alt. Or. No. A133-87. Made in Germany.
Gearbox suspension locking plate (for the screws), suitable for Citroen 2CV. (Screw connection
through the gearbox suspension on the front axle). Reproduction from stainless steel. Or. No. A133-64 Made in Germany.
2598 Articles | Page 22 of 52
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
