Citroen-2CV / 2CV6 / brake lines + accessories, yard goods, universal

Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.

Quality: 3

Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewise 8mm!

Quality: 2

• Suitable for this article
• Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm l
  0,49 €

Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper - nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.

Quality: 3

Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to bend simply. Kunifer does not rust). Clinch screws please specially order!

Quality: 1 Pdf

• Suitable for this article
• Pipe cutting equipment for brake hoses!
  8,83 €
• Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach.
  1,05 €
• Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2C
  7,91 €

Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 1 Pdf

• Suitable for this article
• Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewis
  0,75 €
• Pipe cutting equipment for brake hoses!
  8,83 €
• Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach.
  1,05 €

Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 1 Pdf

• Suitable for this article
• Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €
• Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable for Citroen 2CV
  9,18 €
• Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.
  2,88 €

Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €

Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake line + fuel line fixture. Mounted laterally at the chassis. Suitable for Citroen 2CV4 + 2CV6. (Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.

Quality: 3

Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings. A brake pipe flaring machine is not necessary. Or. No. 1D5426236B

Quality: 3

Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV, Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!

Quality: 3

• Suitable for this article
• Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel allo
  49,48 €
• Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy
  161,54 €

Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV, Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!

Quality: 3

Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV, Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!

Quality: 3

Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both sides: M8x1.25. Optimal if 2 lines are to be connected to each other.

Quality: 3

• Suitable for this article
• Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fl
  0,49 €
• Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewis
  0,75 €

Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.

Quality: 3

Brake line wrench. 10mm + 11mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €

Tap drill M10x1. (M10x1 was very often used with brake hoses). Manual cut tap drill!

Quality: 3

• Suitable for this article

Manual cut tap drill M11x1

Quality: 3

• Suitable for this article

Hook set 135mm long. 4 fittings, optimally for O-rings, seals, Citroen brake hose seals etc. Contents: 1x straight line hook, 1x 90° hook, 1x hook point, 1x awl.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 3,5mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 4,5mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 6,35mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 8,0mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 3,75mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 6,35mm line.

Quality: 3

Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line (connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.

Quality: 3

Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). (Citroen)

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).

Quality: 3 360°

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

LHM+ green, hydraulic fluid. 1 liter. Suitable for Citroen 2CV starting from year of construction 1981 as brake fluid (vehicles with disc brake). Citroen DS starting from year of construction 1967, Citroen CX, GS, etc. for hydraulics.

Quality: 2 Pdf

• Suitable for this article
• Label, for the LHM hydraulic reservoir. The label is transparency, with white pamphlet. Suitabl
  14,78 €
• Label "Maxi - Mini" for the LHM hydraulic reservoir. Suitable for Citroen DS.
  4,56 €

LHM+ green, hydraulic fluid. 20 liter can. Original TOTAL. Suitable for Citroen 2CV starting from year of construction 1981 as brake fluid (vehicles with disc brake). Citroen DS starting from year of construction 1967, Citroen CX, GS, etc. for hydraulics. Liter price = 6,99 euros.

Quality: 2 Pdf

Pipe cutting equipment for brake hoses!

Quality: 3