Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

for Renault 2CV4

2601 Articles | Page 21 of 53
Shipping country Shipping country

Recessed loudspeaker, very flat construction height (scope of delivery: 1 piece). Installation

depth only 30mm! Diameter 143mm. 40 Watt. 4 Ohm. Suitable for door panels of Citroen 2CV, Renault R4, Peugeot 204 - 504..... Particularly flat design, therefore super suitable for door panels (also Citroen 2CV + Renault R4). Outer diameter = 143 mm, cut-out for installation opening in the door panels = 120 - 130mm. Dualcone loudspeaker.

Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8, 10x

M10. Rivet nuts are ideal for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out). You will find the suitable riveting pliers under the number 21082.

Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy

insertion of rivets with optimum force transmission. You will find a suitable range of aluminium rivet nuts under our number 21083. Rivet nuts are ideally suited for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out).

Universal electric attachment kit for tow bars. Includes relay for French cars. 12 volts. 7-pin

socket. Additional control light. Hella flasher relay connection: terminal + = positive supply/terminal 30, corresponds to the + sign on the 2CV relay. Terminal C = output of the indicator relay to the front and rear indicators, corresponds to terminal C on the 2CV indicator relay! Terminal R = connection of the control light. Terminal R2 = connection of an additional control light. Terminal - = ground, must be bolted to the vehicle! The 2CV indicator relay does not have this connection!

Electrical mounting kit universal, for tow trailer coupling. Inclusive Relay for French car. 6

6 Volt. 7 pole plug socket. Additional control light. Connection of the Hella flashing relay: Clamp 49 = plus supply, corresponds + to indications on 2CV the relay. 49a = outlet flashing relay clamps to indicator in front + rear, clamp corresponds to C on 2CV flashing relays! C2 = connection clamps additional control light. Clamp 31 = earth, must be screwed on to vehicle! This port do not have the 2CV flashing relay! The original control light, in the vehicle, you must parallel on the clamp 49a scolded! Electronic kit universal for trailer towing device, incl. relay for French cars, 7 pole plug socket

The '123\EVO' replaces the former 123\BLUE and is a further development. ( 123\EVOLUTIF ) It offers

rs many different advance curves, 5 for tuning with regular fuel, 5 for tuning with LPG/ethanol and 5 'standard'-curves as prescribed by Citroen for ALL two cyl.-engines, inclusive VISA-engines. The 123\EVO also offers : vacuum-advance, warm-up-advance, overheat-retard, spark-balancing, dwell-balancing, current-time-out, idle-speed-control.

PDF file available PDF FILE

Electronic ignition system 12 Volt. For Citroen 2CV6. This electronic ignition system is very easy

to install and no longer has any mechanical components that can wear out. There is no need for any maintenance work on the ignition. You will be thrilled! We have already sold more than 10000 systems. And if you want your 2CV to run even better, we recommend our ignition coil 14395. The ignition system is designed for original engines. (A79/1, M28, M28/1 engines).

PDF file available PDF FILE

Ignition 123UNI is designed for all STANDARD 2CV, Dyane, AMI engines that were ever produced. The

appropriate advance-curve can be selected with a 16 position rotary-switch, behind an opening in the front of the housing. The unit will work on 6 Volt and on 12 Volt systems. The '123\UNI' is designed to work on '2CV' 9 hp, 375cc, A53, M4, A79/0, M28, A79/1 and M28/1 engines in conjunction with the stock black coil. (6 Volt type for 6 Volt battery, and 12 Volt type for 12 Volt battery) The dwell is automatically adjusted. Upon installation, the user has to check his engine plate ( "A", "AZ", "AM", "AYA", "AM2", "AYA2", "AK2", "A06/635", "A06/642", "AM2A" or "A06/664" ) and look in the manual which setting of the rotary-switch is appropriate. There also is a special setting for M28/1-engines running on LPG or on Ethanol, like 'E85' as used in Sweden. ( 'E85' contains 85 percent ethanol, and 15 percent standard fuel )

PDF file available PDF FILE

Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971. Or.Nr.: AY4311

Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971.

Suspension pot, new part, with high-grade steel covering. Suitable for Citroen 2CV. Without

mounting material, small diameter. Old part return not necessarily!

Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids are

inclusive brass bush and rear sealing ring. Per piece. Or. No. AZ434-96. Made by "Franzose / CiPeRe".

Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed starting

from year of construction 11/1971 to 1990). These adjustment eyes are produced completely from high-grade steel (type 304). Additionally they have a small bore, so that they can be lubricated. Top quality and best processing. Produced in Europe! Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

360° VIEW

Hinged tie bar adjustment with eye. Old version (Installed to year of construction 11/1971, fits

however on all 2CV to year of construction 1990). Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

Wheel 4Jx15 for 2CV (tubeless), original size. Attention: The production of these rims has been

discontinued by Citroen. However, the rims are being reproduced close-to-series. The rims are 100% close-to-series in terms of material, all dimensions and the surface coating and correspond to the original equipment standard. We are often asked what a close-to-series rim is. This means that the rim is manufactured by the same factory, on the same machine and with the same materials as the original Citroen rim. The only difference is that Citroen is not the customer. The rim is therefore also approved by the Federal Motor Transport Authority. The wheel basically consists of a rim and a disc. The rim is made from strips that are butt-welded together. The so-called bandage then goes into the rolling operation (normally 2 rolling operations). The disc is then pressed into the rim in the appropriate position. This is known as the press fit. This serves as a fixation for the subsequent welding operation, which is carried out by spot welding. Finally, the entire wheel is coated with a cathodic dip coating to protect it against corrosion and the front is primed in greyish beige. KTL itself is the rust protection. The grey-beige primer is not a final coat. For an optimum appearance, the rims should be painted again. With the reproduction rims known to us, the disc is not pressed in, but only inserted and then welded. (weld seams). These rims therefore have no so-called press fit. But the press fit is what gives the entire wheel its strength. As it is extremely expensive to remanufacture a wheel with a press fit, savings are made on this. That's why our rims are a little more expensive, but your safety should be worth it. Because only the wheel with the tyre makes contact with the road. The rim is for tubeless use, but you can also ride it with a tube!

360° VIEW
2601 Articles | Page 21 of 53
Shipping country Shipping country