2CV, Windshield regulator bracket inside (polished), fits on the left + on the right. Long version
very good reproduction. Very beautiful optic! Suitable for Citroen 2CV to year of construction 1990. Citroen AK + AZU
for Renault 2CV4
2601 Articles | Page 3 of 53
2CV, Windshield regulator bracket inside, fits on the left + on the right. Long version, very good
reproduction. Suitable for Citroen 2CV to year of construction 1990. Citroen AK + AZU
2CV, Window weatherstrip (pane seal) in the C-support. Suitable for Citroen 2CV. Reproduction from
the original supplier! Or.Nr. 95588535
2CV, Window handle inside (catcher). Fixture for the closed flap window in the front door
Reproduction, high quality. Color grey. Per piece, on the left + on the right fitting.
2CV, Window handle inside (catcher). Fixture for the closed flap window in the front door. Suitable
for Citoren 2CV. Good reproduction, per piece, on the left + on the right fitting.
2CV, Window handle inside, from polished high-grade steel (catcher). Fixture for the closed flap
window in the front door. Reproduction, per piece, on the left + on the right fitting.
2CV, special window holder (1 pair, for left + right). Suitable for Citroen 2CV. These window
holders are a real alternative. They are mounted using a screw sleeve and screw. So it doesn't matter if the existing mounting hole in the door is worn or bent. This special version is simply screwed on. The screw sleeve supplied expands when fastened and wedges itself securely in the door. Simple and effective!
PDF FILE 2CV old, handle pan for the door opener in front on the left. Reproduction, color grey. Suitable
for Citroen 2CV with high door linings. Or: AZ841-100
2CV old, handle pan for the door opener in front on the right. Reproduction, color grey. Suitable
for Citroen 2CV with high door linings. Or: AZ841-100A
Handle pan, door opener on the right, color black. The handle pans are installed in Citroen 2CV
with high door linings.
2CV, Handle pan door opener screw set (for both sides). Suitable for Citroen 2CV Special (Sheet
metal driving screw, no fine thread), with high door linings.
2CV, Lug at the rear left in the luggage compartment, for Citroen 2CV. This bracket is welded and
takes up the trunk lid installing rod and the roll roof securement. Made in Europe.
2CV, Lug rear on the right in the luggage compartment, for Citroen 2CV. This bracket is welded and
takes up the roll roof securement. Made in Europe.
2CV, bracket (welded) for the gear lever. Suitable for Citroën 2CV, AK, AZU. This bracket is
welded from above the storage compartment (dashboard).
2CV, bracket for the choke cable (square mount) in the interior (made of sheet metal, welded in to
the right of the speedometer). Suitable for Citroen 2CV, AK,
2CV, bracket for the headlight height adjustment rod in the interior (made of sheet metal, welded
to the left of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, bracket for warm air adjustment lever top - bottom in the interior (made of sheet metal
welded to the right of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, Mounting on the left for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, Mounting on the right for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, left valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, left valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
2CV, Valence panel on the left for Citroen 2CV. (attached sheet metal between fender and bonnet)
Good reproduction from the European Union.
2CV, right valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, right valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
Valence panel on the right for Citroen 2CV. (attached sheet metal between fenders and bonnet). Good
reproduction from the European Union.
2CV, Valence panel, rubber seal between Valence panel and a-post (front wall). Suitable for Citroen
2CV starting from year of construction 1961. Made in France.
2CV, Valence panel, fixing clip from high-grade steel, for the securement of the Valence panel at
the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A. Made in Germany.
2CV, Valence panel, fixing clip made of galvanized metal, for the securement of the Valence panel
at the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A
2CV, rear end panel for Citroen 2CV (original). The rear end panel is the final version, Installed
until 1990. Original Citroen (MCC), no reproduction!
2CV, Rear end panel for Citroen 2CV. Optically like original. The rear end panel is amplified and
galvanized. It is the final version, installed until 1990. Electrolytically galvanized. Made in Europe.
2CV, Rear end panel repair sheet metal for Citroen 2CV. It is only the outer skin of the rear end
panel, with the cutouts for the tail lamps. Made in Europe.
2CV, Back window clearly, heatable, not suitable for small rear window. Caution! Increased shipping
cost starting from 59 Euro.
2CV, Back window, clearly, not heatable, not fitting for small rear window! About 34x86 cm
m. Caution! Increased shipping cost starting from 59 EURO.
2CV, back window seal for inclination sealing trim (delivery without inclination sealing trim)
Overall length about 2250mm. Made in France
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6 RHD (right hand drive). Made in Europe.
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6. Made in Europe.
Heater hose connection connecting piece (small) on the right (welds at the front wall). Suitable
for Citroen 2CV6. Made in Europe.
Body new! Suitable for Citroen 2CV6 RHD (right hand drive). Only collection, no dispatch possible
The body was built completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
Body new! Suitable for Citroen 2CV6. Only collection, no dispatch possible. The body was built
completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
2CV, Luggage compartment sheet metal with all flanges and reinforcement (luggage compartment tub)
Inclusive wall + connection sheet metal. Suitable for Citroen 2CV all years of construction. Very good reproduction, like original. Electrolytically galvanized. Made in Europe.
2601 Articles | Page 3 of 53
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
