Taillight cap on the right, reproduction, for Seima light. The caps are supplied without test
characters. Suitable for Citroen 2CV.
for Citroën 2CV 2CV6
2771 Articles | Page 41 of 56
Taillight cap red (original AXO, with "E" test mark). Suitable for Citroen AK. Citroen DS BREAK
HY, Mehari, AMI6. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar level from the inside measured: 14,5mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap red (original SEIMA, with test characters). Suitable for Citroen AK. Citroen DS
BREAK. HY, Mehari. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar level from the inside measured: 10,0mm. We could buy up some thousand caps. No reproduction (NOS).
Reflector square, framed in metal. With fixing straps, dimensions approx. 60x45mm. These reflectors
were used in many French cars!
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Cable harness color markings (100 item), for plugs with 4mm diameter. 9 different colors. Suitable
for Citroen 2CV, DS, HY, SM, GS, CX, Peugeot
Sause Ente adhesive kit, Citroen 2CV. Reproduction from the original supplier! 4-coloured. The
decal was scanned 15 years ago on an original vehicle. The black edges are somewhat pixelated. But you can only see this if you squat down and stand 10cm away!
PDF FILE 
Switch - push button, square, with chrome frame. Universally suitable. Please note: this is a push
button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Switch for the reversing lamp. Suitable for Citroen 2CV6. This switch is as substitute for the
original switch, which was mounted in the rear cap of the gearbox (not with all models!). Note: The switch must be mounted with the attached distance disk! Thread M14x1,5
Seal for the gear lever in the front wall. Suitable for Citroen 2CV starting from year of
construction 1966. Or. Nr.AZ33480
Gearshift knob (ball), made of plastic, with 2 printed horse heads (CV = horse / 2CV = 2 horse
heads) + gearshift diagram! Colour black. Suitable for Citroen 2CV, Dyane, Mehari
Gearshift knob (ball), made of plastic, with printed gearshift diagram! Colour black. Suitable for
Citroen 2CV, Dyane, Mehari
Gearbox shift sleeve (Selector wheel-disc) for the 2nd-3rd gear. Suitable for Citroen 2CV6, Dyan6
AK, ACDY, AMI, Mehari. Or. no. A335-96
Gear lever spring washer, for Citroen 2CV. This disk is mounted with the connection by the gear
lever interior onto the gear lever to the gearbox.
Gear lever: M7 screw, for the clip (gearstick on the gearbox). Inclusive nut and disks. Suitable
for Citroen 2CV6, 2CV4, Dyane, Mehari, AK.
Gear levers pin, for the gear lever connection with the shifter rod rubber. Suitable for Citroen
2CV. Measurement: 6x20mm. Or.Nr.: A334-57
Gear lever link (sheet metal), 90° twists, connection of the gear lever in the interior on gear
lever on the gearbox. (without rubbers). Suitable for Citroen 2CV.
Shift rod connector complete, with rubber bushings, spring washer, safety clips, bolts. Suitable
for Citroen 2CV. This connector is mounted between the gearstick lever from the passenger compartment and the gearstick lever on the gearbox.
Gear levers links with PTFE bushes. Suitable for Citroen 2CV. This link is mounted between the gear
lever from the vehicle interior and the gear lever on the gearbox.
Foam material set, for 1 seat, to upholster the seat! Suitable for Citroen 2CV, Dyane. (2x foam
material plate 15x580x580mm). Made in Germany
2771 Articles | Page 41 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
