07/1964 to 02/1970, AMI 6 (12/1963-1968), Méhari (05/1969 > 12/1971) and Dyane up to the year of construction 1979. Connector for the brake line running rearwards, linking the brake hose to the cross-mounted brake line above the rear axle. Or. No. AM453-70A
construction 1981 (vehicles with drum brake in front). This brake line set is completely preformed and is supplied with DOT seals. Brake line diameter: 3,75mm. Brake line connector: 8mm. Manufactured in Scandinavia. Corresponds to DIN EN 10217 /05.05, TCI ¦
year of construction 1981 (vehicles with disc brake in front). This brake line set is preformed and with LHM seals. Manufactured in Scandinavia. Corresponds to DIN EN 10217 /05.05, TCI
caliper. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
the 3 path links. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
for Citroen 2CV, Dyane, Mehari.
construction 01/1972. Connection from the T-link to the front right wheel brake cylinder. Brake line diameter: 4,5mm. Connector: M9x1,25. Or. No. AY45331
brake cylinder (front side) to the brake hose. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: about 345mm. Or. No. AY453353A
T-link to the front left wheel brake cylinder. Brake line diameter: 3,75mm. Connector: M8x1
T-link to the front right wheel brake cylinder. Brake line diameter: 3,75mm. Connector: M8x1
that rear wheel-radius arm, from the brake hose to the wheel brake cylinder. On the left + on the right fitting! Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 630mm. Or. No. AY453-34B + AY453-34C.
master brake cylinder on the T-link at the rear axle. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 1950mm. Or.Nr.: AY 453-32B
sides: M8x1.25. Optimal if 2 lines are to be connected to each other.
(connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.
02/1970 and 06/1970. Mehari built between 05/1969 and 12/1971. Dyane built between 05/1969 and 06/1970. Hose diameter: 4.5 mm. Screw connection: M9.
brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.
2CV6, DS, CX, BX, HY, GS
Mehari. Please note: This washer is specially designed for the brake calliper. It is 3mm thick and black galvanised. If a normal washer (thinner) is used, the fixing screw is often too long! (Brake calliper cannot be fastened properly or gearbox housing tears)
bag for the pistons, seal between the brake caliper halves, connecting tube brake caliper halves. Now improved version from Denmark!
Dimensions: 10 x 6.2 x 1.9 mm, suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for our reproduction brake calipers 13013.
suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for original brake calipers. Not suitable for reproduction brake calipers.
to year of construction 1990 (8mm brake line screw connection). No old part return required! Attention: A 3mm washer must be used for the mounting screws (our number 1300) or continue to use the original washers. Without these 3mm washers, the fastening screws are too long!
1981. Caution, it gives also brake calipers, which were sealed between the halves only with an O-ring!
to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
1981 to 1990. Reproduction.
to 1990. Original manufacturer quality. Of it their safety is dependant. Be careful: If the brake discs are installed at the front of your car: Just use hydraulic fluid LHM as brake fluid and never DOT4! DOT4 can destroy within 24hours the hole brake system. That is expensive und very dangerous. Every LHM brake part is green marked.
mounted. Consisting of: New brake drum, new wheel bearing, new shaft seal, new wheel bearing screw. Suitable for Citroen 2CV.
supplied without wheel bearings. Or. No. 96995256
(small drum, not suitable for 2CV Van). Per piece.
1 version, with two-colored painted body! (yellow windshield frame, yellow Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier.
set for completely black painted body! yellow = GDA, black = EXY.
version, with two-colored painted body! (grey windshield frame, grey Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier.
(plain black body). Colour numbers: AC057/GVP/EVP + AC099/GVR/EVR. Attention: This adhesive kit is as original, with the printed grey areas. No simplified reproduction of the contours without coloured areas! The painter does not have to paint the grey areas separately! We do not have the simple, cheap replica adhesive kits in our range.
1 version, with two-colored painted body! (red windshield frame, red Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier
(Single-colour black body!) Colour number EKA + EXY. Unfortunately, the decal set is currently not available in the quality we require. We are working on a solution!
2CV chassis, from year of construction 05/1971. Or. No. AY721-106A
2CV chassis, from year of construction 05/1971. Or. No. AY721-104B
body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x DOT brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x LHM brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
PDF FILE 
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
