2CV, Mounting on the left for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
for Citroën 2CV 2CV6
2754 Articles | Page 3 of 56
2CV, Mounting on the right for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, left valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, left valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
2CV, Valence panel on the left for Citroen 2CV. (attached sheet metal between fender and bonnet)
Good reproduction from the European Union.
2CV, right valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, right valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
Valence panel on the right for Citroen 2CV. (attached sheet metal between fenders and bonnet). Good
reproduction from the European Union.
2CV, Valence panel, rubber seal between Valence panel and a-post (front wall). Suitable for Citroen
2CV starting from year of construction 1961. Made in France.
2CV, Valence panel, fixing clip from high-grade steel, for the securement of the Valence panel at
the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A. Made in Germany.
2CV, Valence panel, fixing clip made of galvanized metal, for the securement of the Valence panel
at the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A
2CV, rear end panel for Citroen 2CV (original). The rear end panel is the final version, Installed
until 1990. Original Citroen (MCC), no reproduction!
2CV, Rear end panel for Citroen 2CV. Optically like original. The rear end panel is amplified and
galvanized. It is the final version, installed until 1990. Electrolytically galvanized. Made in Europe.
2CV, Rear end panel repair sheet metal for Citroen 2CV. It is only the outer skin of the rear end
panel, with the cutouts for the tail lamps. Made in Europe.
2CV, Back window clearly, heatable, not suitable for small rear window. Caution! Increased shipping
cost starting from 59 Euro.
2CV, Back window, clearly, not heatable, not fitting for small rear window! About 34x86 cm
m. Caution! Increased shipping cost starting from 59 EURO.
2CV, back window seal for inclination sealing trim (delivery without inclination sealing trim)
Overall length about 2250mm. Made in France
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6 RHD (right hand drive). Made in Europe.
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6. Made in Europe.
Heater hose connection connecting piece (small) on the right (welds at the front wall). Suitable
for Citroen 2CV6. Made in Europe.
Body new! Suitable for Citroen 2CV6 RHD (right hand drive). Only collection, no dispatch possible
The body was built completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
PDF FILE Body new! Suitable for Citroen 2CV6. Only collection, no dispatch possible. The body was built
completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
2CV, Luggage compartment sheet metal with all flanges and reinforcement (luggage compartment tub)
Inclusive wall + connection sheet metal. Suitable for Citroen 2CV all years of construction. Very good reproduction, like original. Electrolytically galvanized. Made in Europe.
Boot floor under spare wheel, solo. Simple reproduction. For Citroen 2CV, all years of
construction. Take better our own 15459 reproduction!
2CV, Luggage compartment sheet metal solo for Citroen 2CV. It is a very good reproduction, with all
flanges, drain holes and reinforcement. Electrolytically galvanized. Made in Europe.
2CV, Luggage compartment wall sheet metal with upper connection sheet metal. (without luggage
e compartment sheet metal under spare wheel). Suitable for Citroen 2CV all years of construction. Good reproduction. Electrolytically galvanizes.
2CV, trunk floor, rubber plug. The rubber plug was mounted also in Rear end panel of Citroen DS
Cross profile. Diameter 32-34mm. (suitable by DS for item 37227 + 35146)
Luggage compartment lid for Citroen 2CV, starting from year of construction 2/1970. Good
reproduction from the European Union.
2CV, luggage compartmend lid for Citroen 2CV, starting from year of construction 2/1970. Original
Citroen, no reproduction.
2CV, Luggage compartment lid - lock fastener cover sheet. The sheet metal is mounted in the luggage
compartment lid and leads the lock fastener! Or.Nr. AZ844123. Made in Europe.
2CV, luggage compartment lid gasket kit completely (Made in Germany). Suitable for Citroen 2CV. The
seal has been made especially for us. The "rubber flag" is diagonally, therefore there is a better sealing. Consisting of: 3 seals, cut to length and mitred cut. Width of the rubbers: approx. 29mm (like original).
2CV, boot lid trim (3 parts, made from 8mm natural fleece). Felt light grey. The trim must be glued
in place. Made in Germany.
2CV, boot lid trim (3-piece, made from natural fleece). Black felt with a backing layer of
sound-deadening material. The trim must be glued in place. Made in Germany.
2CV, Luggage compartment lid, emblem "2CV6 Charleston". Original-faithful reproduction made of
metal. The emblem is self adhesive. Measurements: 35x240mm
2CV, Luggage compartment lid, emblem "2CV6 club". Original-faithful reproduction made of metal. The
emblem is self adhesive. Measurements: 35x175mm
2CV, Luggage compartment lid, emblem (signature) "2CV", from synthetic chromium-plates. Length
about 55mm, height of ca.21mm.
2CV, Luggage compartment lid, emblem (signature) "2CV4", from synthetic chromium-plates. Length
about 85mm, height of ca.25mm
2CV, Luggage compartment lid, emblem (signature) "2CV6", from synthetic chromium-plates. Length
about 85mm, height of ca.25mm
2CV, Luggage compartment corner on the left, transition baggage compartment floor sheet metal to
the rear end panel. Suitable for Citroen 2CV. Made in Europe.
2754 Articles | Page 3 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
