cable to the interior light. Contents: retaining plate, switch, installation instructions. The retrofit kit is attached to the existing screws of the door hinge!
equipment of the 2 CV AZAM in the Sixties (connection to the interior lighting over 2 cables). Switching over earth cable! Not for standard 2CV with earth over car body. Made in Germany.
e diameter: 20mm. Height of 26,5mm. Or.Nr. ZC9620373
Length: 3000 metres. Strength: 40. UV resistant, high tensile strength + low stretch, high abrasion resistance, washable and resistant to chemicals. Recommended needle size: 120-140.
compensate the tooth flank play! Suitable for Citroen 2CV6, AK, ACDY, Dyane, Mehari, AMI. Or. No. A122-98. Diameter: 10.5mm. Length: 21mm.
could find a stock, with supported over 400 original camshafts. These are now in our existence.
acid-resistant. Made in Germany.
metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20
pieces. Scope of delivery: 4x tap drill, 5x plug screw for each thread size, 10x sealing ring for each thread size.
drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)
measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
etc.. Of course other huiles oils can also be pumped with it. Super practical.
the pads do not suck and absorb water! Your wife will be grateful!
0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.
pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.
Consisting of spring, ball, ball fixture, slip piece (11,24mm diameter, 16mm long, 1 Version). Or. No. 1A 5411408C
Consisting of spring, ball, ball fixture, slip piece (11,40mm diameter, 16mm long, 2 version). Or. No. 1A 5411409N
Consisting of spring, ball, ball fixture, slip piece (11,74mm diameter, 16mm long). Or. No. 75508466
hole diameter about 28,5mm. Connector center to center, about 49mm
Made by 'Franzose/CiPeRe' in Europe. Good quality. The oil filler neck is a very important component. It regulates the pressure in the engine housing. Correct pressure in the engine housing prevents oil leakage from the engine and ensures reliable lubrication. Unfortunately, the rubber flaps (which regulate the internal pressure) inside the oil filler neck harden over the years (or due to synthetic oils). The only solution is to replace the oil filler neck.
Suitable for Citroen 2CV + Visa 652, from model year 09/1971 on
of construction 09/1971.
summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.
in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm
for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI (it is possible to mount the oil cooler without dismantling the engine fan housing)
Suitable for Citroen 2CV.
(Oil line from the engine block to the cylinder heads)
below the ignition. Produced from high-grade steel. Made in Germany.
cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.
PDF FILE 
VIDEO 
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
