for Citroën 2CV 2CV6
2754 Articles | Page 54 of 56
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
White wall rings, 4 fittings. Suitable for Citroen 2CV. Note: The white wall rings can be mounted
only in combination with our rims chrome rings 16815!
Service manual volume 2, out + installation of parts. For Citroen 2CV4 + 2CV6. In addition, the
book is component of service manual 18200. Language German.
Tool 1677-T, for the nuts (6x9mm) the rocker arm and at the gearbox (Citroen 2CV). Clutch housing
(6x9mm) Citroen DS. Attention: The screws are extremely tight. Therefore, first hit the screw head with a hammer (setting impact) to loosen the screw in the thread!
Winter tire 135R15MS. Manufacturer Michelin. Suitable for Citroen 2CV. Also very well as
all-terrain tires for Citroen Mehari.
PDF FILE Winter tire mounts on a new rim, 135/15. Manufacturer Michelin. We use only our own
series-identical rims and no reproduction rims! Suitable for Citroen 2CV.
Wiper axle for Citroen 2CV4 + 2CV6. New part. Complete repair set, inclusive connector nut, rubber
seal etc., for 1 axle!! Improved version! Made one in European Union. Connector nut + disk are not chromium-plated, they are only silver!
Wiper axle 2CV4+6, without mounting material. (Nuts, sealing ring), reproduction. Suitable related
d accessory: 14154 sealing rubber, 14247 chrome cap, 14152 nut outside, 14157 nut inside, 14155 tie-clip for wiper axle.
Wiper axle chrome ring, Citroen 2CV, HY. Is mounted over the sealing rubber of the wiper axle
Reproduction. Per piece.
Wiper blade from polished high-grade steel. Suitable for Citroen 2CV, to year of construction 1990
The wiper blade is spring-loaded. Length: 240mm. We let these wiper blades manufacture particularly for 2CV, and they have the original length of only 240mm! Per piece.
Wiper blade elastic, 2 fittings, for Citroen 2CV. Original Valeo! (V.24) Wiper blade length
25,50cm. The wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings. Stuffing contents: 2 fittings!
Wiper blade elastic, per piece, for Citroen 2CV. Original Valeo. Wiper blade length 25,5cm. The
wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings.
Chromium-plates wiper blades and wiper arms (2 fittings). Suitable for Citroen 2CV. This set
contains the wiper blades and arms from our own production.
Wiper blades elastic, from high-grade steel. (1 pair). Suitable for Citroen 2CV, which are equipped
with our wiper arms from high-grade steel (16832).
- Suitable for this article
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with angular wiper engine.
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with round wiper engine.
Wiper motor complete set, 12 Volt. Alternatively suitable for Citroen 2CV, up to year of
construction 6/1981. Power supply and wiper switch must be adapted! Consisting of: Wiper motor, bracket for the motor + wiper linkage, wiper linkage. This set is an alternative for the square windscreen wiper motor which is no longer available.
Wiper motor relay for end switch of old wiper motor. Suitable for Citroen 2CV4, 2CV6, AK. This
relay is required if you are converting from the old angular wiper motor (SEV Marshal with perforated plate) to the modern round wiper motor. Since the old wiring has no limit switch, you can realise this with this relay. Please note the circuit diagram on the relay.
Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. First
oversize. Outside diameter: about 34,2mm. Inside diameter: 27,5mm.
Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. Standard
dimension. Outside diameter: about 34,00mm. Inside diameter: 27,50mm.
Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. Second
oversize. Outside diameter: about 34,3mm. Inside diameter: about 27,5mm.
Gear rack ring in axle tube 2CV. Reproduction. Made in European Union. Outside diameter 34,05mm
inside diameter 27,50mm.
Gear rack ring in axle tube 2CV. Reproduction. Made in European Union. Outside diameter 34,10mm
inside diameter 27,50mm.
Gear rack ring in axle tube 2CV. Reproduction. Made in European Union. Outside diameter 34,15mm
inside diameter 27,50mm.
Gear rack ring in axle tube 2CV. Reproduction. Made in European Union. Outside diameter 34,25mm
inside diameter 27,50mm.
Gear rack steering unit, starting from Orga No. 2276. Suitable for Citroen 2CV. 32 teeth, overall
length: 370mm. Reproduction.
Trim for the rainwater gutter, synthetic chromium-plates. Suitable for Citroen 2CV, all years of
construction. The trim is a spare part from the original supplier and of better quality than the reproduction trim.
Trim reproduction, for the rainwater gutter (one piece). Synthetic chromium-plates. Suitable for
Citroen 2CV, all years of construction.
2754 Articles | Page 54 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
