Search in Citroen-2CV-2CV6 for
2753 Articles | Page 11 of 56
2CV, Door trim for the rear door, reproduction, made of polished aluminium. The moulding is
supplied with fixing clips. Length: 660 mm, width: 6 mm
2CV, Door trim for the front door, reproduction, made of polished aluminium. The trim are supplied
with clamps. Length: 750 mm, wide ones: 6 mm
2CV, Conversion kit on large luggage compartment hood, suitable for Citroen 2CV. This conversion
kit was in former times an option.
2CV, floorpan plate centrically for the original chassis of Citroen 2CV, Dyane. (semicircular
recess). Made in Europe.
2CV, plastic lining for the rear roof tie bar (at C-support level). Reproduction like original
Made by Franzose. Length 870mm. Or. No. 95593162.
2CV, plastic lining for the front roof tie bar (at B-support level). Reproduction like original
Made by Franzose. Length: 880mm. Or. No. 95595863.
2CV, Reinforcement cross-beam under the seat bench, for Citroen 2CV. This cross-beam is welded
crosswise and the transition to the sheet metal between the wheel housings and the luggage compartment. Made in Germany.
2CV, wind catch on the B-pillar to the rear door. Colour grey. Left + right fitting. For Citroen
2CV up to 1970 (6 symmetrically arranged fastening holes!). This is the rubber (plastic) which is attached to the B-pillar and to the rear door.
2CV, wind catch on the B-pillar to the rear door. Colour black. Left + right fitting. For Citroen
2CV up to 1990. This is the rubber (plastic) which is attached to the B-pillar and to the rear door.
2CV, windbreak, plastic caps (expanding rivet) for fixing the windbreak rubber to the rear door (7
pieces required per side). The expanding rivet also fits the door hinge cover.
2CV, wind catch: Metal strip for attaching the wind catch rubber to the B-pillar. Reproduction like
the original, with a small bend. Suitable for Citroen 2CV. The strip is fixed with 3mm rivets or expanding rivets. Or. No. 3Z 5413825Z
Wind catch, metal strip for the securement wind catch rubber on the door. Suitable for Citroen 2CV
The strip is inside, mounted at the rear doors. Per piece.
2CV, Windshields - ornamental frame, for Citroen 2CV AZAM. The ornamental frame is production from
high-grade steel. Ordered please the connection clip specially!
2CV, Windscreen seal for Citroen 2CV AZAM. The seal is for the mounting of a trim frame! The trim
frame was only mounted on the Belgian 2CV AZAM. Attention: The bonding of the butt edges of the gasket are really bad. But we still offer this rubber, because there are no other rubbers for the AZAM. If you need it, it is better than no rubber!!!
Windshield frame completely, inclusive hood hinge. Suitable for Citroen 2CV. Very good
reproduction, like original. The transition of the corners to the a-post is substantially better, than with the sheet metal 15297. The windshield frame is electrolytically galvanized. Made in Europe.
Windshield frame cross beam down. Suitable for all Citroen 2CV. (Cross beam above the Ventilation
shutter, from the inside seen.) Made in Europe.
2CV, windscreen frame, aluminium rail at the top of the soft top. This rail is used to clamp the
original rubber seal onto the windscreen frame. The aluminium strip has a polished finish. This aluminium rail complies with the original specifications and is designed for the original seal (our item number 17067). We have the rail manufactured to our own specifications and have made it slightly more curved. This ensures it sits more securely on the windscreen frame than the original aluminium rail.
2CV, windscreen frame, aluminium rail at the top of the soft top. This rail is used to clamp the
improved rubber seal (17065) onto the windscreen frame. This aluminium rail is specifically designed for seal 17065. As the 17065 seal has an additional sealing lip, the aluminium rail must be designed slightly differently. It is not as strongly curved as our 17070 rail. However, when used in conjunction with the 17065 seal, it is also very securely fixed to the windscreen frame!
2CV, windscreen frame, seal under the aluminium rail, at the top of the roof. (Rolling roof seal)
This seal has an additional rubber lip. This ensures that the aluminium rail is fixed much more securely to the roof. Suitable for Citroën 2CV, with a year of construction between 1960 and 1990. Or. No. A971-80A. We recommend our Part No. 17073 as a better-fitting aluminium rail.
2CV, windscreen frame, seal under the aluminium strip, at the top of the roof. This seal is
manufactured exactly like the original seal fitted by Citroën. Suitable for Citroën 2CVs with years of construction 1960 to 1990. Or. No. A971-80A. The corresponding aluminium strip is part no. 17070.
2CV/Dyane, master brake cylinder fixture on the front wall (welds). Suitable for Citroen 2CV +
Dyane. Electrolytically galvanized. Made in Europe.
2CV/Dyane, master brake cylinder bracket: Reinforcement brackets (2 pieces) with the stud bolts
These brackets are mounted from the inside at the connection pedal floor to firewall. Suitable for Citroen 2CV + Dyane. Electrolytically galvanised. Made in Europe.
2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing. Suitable for
Citroen 2CV6 starting from year of construction 1970 to 1990. Label quality
2CV6, 602ccm. Engine gasket set without shaft seals. For Citroen 2CV6 (to production end) and 2CV4
with 435ccm engine. Label manufactor.
2CV6, tail pipe securement clamp sheet metal. This sheet metal is for the centric rubber fixing at
the chassis. Reproduction from high-grade steel! Or.Nr.AM18284. Made in Germany.
2CV6, tail pipe securement rubber short. This rubber is for the centric securement. Hole spacing
about 60mm. Suitable for Citroen 2CV6. Made in Germany.
2CV6, tail pipe securement rubber long. This rubber is for the rear securement, height of bumper
Hole spacing: about 100m. Length totally: about 111mm. Suitable for Citroen 2CV6. Made in Germany.
2CV6, tail pipe exhaust clip, for Citroen 2CV6 + 2CV4. These clips are pushed over the tail pipe
e and hold the exhaust retaining rubber. Screw connection: M6
2CV6, elbow pipe (S-pipe). Good reproduction. Brand manufacturer from Europe. Without fixing
material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, rear muffler locking collar, from high-grade steel. Suitable for Citroen 2CV. (the bracket
locates the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear muffler locking collar, made of metal. Suitable for Citroen 2CV. (the bracket locates
the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear silencer (long silencer). Good reproduction. Brand manufacturer from Europe. Without
mounting material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, rear muffler. Optically as in the seventies Installed. Without mounting material! Suitable
for Citroen 2CV6 + 2CV4. All connection diameters are the same.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is
locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is
locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under
the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK
2753 Articles | Page 11 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
