polyamide'. Natural colour (as original). This polyamide line is resistant to modern fuels containing ethanol! Inner diameter: 4.0 mm. Outer diameter: 6.0 mm. The line fits into the original fuel line holders on the side of the chassis. The line is mounted on the side of the chassis and connects the tank and the fuel pump. Length: 2950 mm
64mm. Tappet length: 64mm. Or.No.: A1738A
1968, Renault, Peugeot. This seal replaces the paper gasket and is made of "KLINGERSIL". 0,5mm thick. Klingersil is an extremely resistant material, against oils, petrol, alcohol etc.
Diameter: 5,5mm. Fasten please the hose with a hose clamp. Customer cut, return not possible!
are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.
catalog are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Measurements about 44 x 36mm. 2mm heavily.
problem when the 2CV does not draw petrol after a long winter break (and it was forgotten to make the petrol stable with an additive before the break). Consisting of: fuel sender with seal, fuel line all the way, petrol pre-filter, petrol pump with spacer plate and screw connection, hose clamps. Simply everything you need to replace the entire intake side from the tank to the carburettor!
model. Better start after long immobilisation time. The membrane of the fuel pump does not run dry quickly. Indispensable for vintage cars. For fuel hose with 5,5 - 7,5 mm internal diameter. Diameter 34mm. Construction length totally 100mm.
12/1971. The link is in front, laterally mounted at the chassis, and joins the gasoline line from the tank to the fuel hose to the gasoline pump. Dimensions: 6x1x70mm. Or. No.: 5400918. Made in Germany.
pump with hand lever. Because most of 2 cv do not run much and because of high percentage of Ethanol in fuel, the gasoline pump desiccates. With this gasoline pump it is possible to pump fuel by hand, saving the battery after long immobilisation time. Made in EEC.
e following engines: A79/1, M28, M28/1. Or. no. AY173-99
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
e for: Diesel, fuel oil, coolant, brake fluid.
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
