1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump, carburettor jet stage 2 (110 + 125), jet idle, CO regulating screw. Made in Europe
year 1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump
Carburettor Solex: 26/35 CSIC + 26/35 SCIC. With this set, the original carburettor can be repaired (of course you need expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburettor Solex: 34 PICS. With this set, the original carburettor can be repaired (of course, this requires expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
carburetor was mounted starting from about 1985.
compare accurately the drawing whether the seal fits!
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
2CV6 with oval carburetor. Quality after production from Europe.
2CV to year of construction 1981, with round carburetor. Inside diameter 34mm. Made in Germany
2CV6 with oval carburettor. Made in Germany. Thickness: approx. 9.0 mm. This plate, made in Germany, is manufactured in the same way as the original plate, with many layers of sealing paper soaked in resin and pressed together. There are also many carburettor plates made of plastic on the market, but these do not achieve the same level of insulation.
2CV6 with oval carburetor. Reproduction. Thickness: about 9mm.
carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
10x14x27,5mm. Very good after production from the European Union.
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
Citroen 2CV. Made in Germany.
Citroen 2CV. Made in Germany.
absorber. Suitable for Citroen 2CV. Made in Germany.
absorber. Suitable for Citroen 2CV. Made in Germany.
Citroen 2CV. Or. No.: A44278A
for Citroen 2CV. Or.Nr.A44295
all bearings and pinions are accurately bedded in and measured. The steering worm and the gear rack are re-tooled with grease nipple. To lubricate thus at any time from the outside. 250 euros Old part deposit.
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
indicator-relais. easy to fit.
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
PDF FILE 
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
